吉林大学学报(工学版) ›› 2011, Vol. 41 ›› Issue (增刊1): 111-114.

• paper • Previous Articles     Next Articles

Test on hot stamping process of automotive ultra high strength steel beams

XU Hong, SHEN Yong-bo, GU Zheng-wei, MENG Jia, YU Si-bin, LI Xin   

  1. College of Materials Science and Engineering, Jilin University, Changchun 130022, China
  • Received:2011-01-25 Online:2011-09-01 Published:2011-09-01

PDF (PC)

1072

Abstract:

Ultra high strength steel 22MnB5 used for automobile is selected for study.Direct hot stamping process and indirect hot stamping process were used for the automobile beam forming test.The microstructure of the samples was analyzed by microscope,and the tension strength and the hardness distribution of the samples were tested.The test results show that the microstructure of formed parts is ideal lath martensite,and tensile strength is greater than 1500 MPa,the hardness greater than 450 HV.The results fully meet the actual production requirements.According to the actual production situation,the appropriate forming process may be selected.

Key words: metallic materials, 22MnB5, direct hot stamping, indirect hot stamping, ultra high strength steel, beams

CLC Number: 

  • TG306


[1] 陆匠心,王利。高强度汽车钢板的生产与使用
[J].汽车工艺与材料,2004(2):1-6. Lu Jiang-xin,Wang Li.Production and usage ofh igh-st rength steel sheet metal in automative industry
[J].Automobile Technology and Material,2004 (2):1-6.

[2] Peng C,Muammer K.Simulation of springback variation in forming of advanced high strength steels
[J].Journal of Materials Processing Technology, 2007,190(123):189-198.

[3] Turetta A,Bruschi S.Investigation of 22MnB5 formability in hot stamping operations
[J].Journal of Materials Processing Technology,2006,177(1):396-400.

[4] Merklein M,Lecher J.Investigation of the thermomechanical properties of hot stamping steels
[J].J ournal of Materials Processing Technology,2006, 177(1):452-455.

[5] 谷诤巍,单忠德,徐虹,等。汽车高强度钢板冲压件热成形技术研究
[J].模具工业,2009,35(4):27-29.G u Zheng-wei,Shan Zhong-de,Xu Hong,et al.Hot forming technology of automotive high strength steels heet stamping part
[J].Mould Industry,2009,35 (4):27-29.
[1] JIANG Qiu-yue,YANG Hai-feng,TAN Cai-wang. Strengthening properties of welded joints of 22MnB5 super high strength steel [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1806-1810.
[2] ZHAO Yu-guang, YANG Xue-hui, XU Xiao-feng, ZHANG Yang-yang, NING Yu-heng. Effects of Al-10Sr modifiers with different states, modification temperature and holding time on microstructure of ZL114A alloy [J]. 吉林大学学报(工学版), 2018, 48(1): 212-220.
[3] LYU Meng-meng, GU Zheng-wei, XU Hong, LI Xin. Process optimization of hot stamping for anti-collision beam with ultra high strength [J]. 吉林大学学报(工学版), 2017, 47(6): 1834-1841.
[4] TANG Hua-guo, MA Xian-feng, ZHAO Wei, LIU Jian-wei, ZHAO Zhen-ye. Synthesis microstructure and thermal properties of high performance bulk Al [J]. 吉林大学学报(工学版), 2017, 47(5): 1542-1547.
[5] LIU Xiao-bo, ZHOU De-kun, ZHAO Yu-guang. Microstructure and mechanical property of Mg2Si/Al composites fabricated by semi-solid extrusion under different isothermal heat treatments [J]. 吉林大学学报(工学版), 2016, 46(5): 1577-1582.
[6] GU Zheng-wei, LYU Meng-meng, ZHAO Li-hui, XU Hong, LI Xin, LU Guan-han. Optimization of quenching parameters of ultrahigh strength steel in hot stamping process [J]. 吉林大学学报(工学版), 2016, 46(3): 853-858.
[7] HU Ping, ZHANG Jin-nyu, SHEN Guo-zhe, LIN Fa-cai, LIU Li-zhong. Influence of stress state on the hardness distribution of S-rail in tailored die quenching process [J]. 吉林大学学报(工学版), 2016, 46(2): 500-504.
[8] LI Chun-ling, FAN Ding, WANG Bin, YU Shu-rong. 5A06 aluminum alloy and galvanized steel butt welding-brazing by laser with preset filler powder [J]. 吉林大学学报(工学版), 2016, 46(2): 516-521.
[9] ZHANG Jia-tao, ZHAO Yu-guang, TAN Juan. Effect of starting microstructure on refining potency of electro-pulsing on reverse austenite grain [J]. 吉林大学学报(工学版), 2016, 46(1): 193-198.
[10] MA Yun-hai, SHANG Wen-bo, FAN Xue-ying, GAO Zhi-hui, TONG Jin, YAN Zhi-feng, CHANG Zhi-yong. Preparation and degradation of porous β-tricalcium phosphate bioceramic for bone imitaion [J]. 吉林大学学报(工学版), 2015, 45(4): 1367-1374.
[11] GUAN Qing-feng, LI Yan, HOU Xiu-li, YANG Sheng-zhi, WANG Xiao-tong. Modification of solid solution Mg-Gd-Y-Nd alloy irradiated by high current pulsed electron beam [J]. 吉林大学学报(工学版), 2015, 45(4): 1200-1205.
[12] GAO Song, LIANG Ji-cai, CHEN Guang-yi, WEI Zhi-yong, TENG Fei. Rapid adjusting of fundamental units in process of flexible 3D stretch-bending [J]. 吉林大学学报(工学版), 2014, 44(6): 1723-1728.
[13] HUANG Jian-kang, HE Cui-cui, SHI Yu, FAN Ding. Thermodynamic analysis of Al-Fe intermetallic compounds formed by dissimilar joining of aluminum and galvanized steel [J]. 吉林大学学报(工学版), 2014, 44(4): 1037-1041.
[14] GUAN Qing-feng,JI Le,CAI Jie,YANG Sheng-zhi,LIU Shi-chao,ZHANG Zai-qiang,HOU Xiu-li. Surface microstructure and properties of 3Cr13 martensitic stainless steel after high current pulsed electron beam bombardment [J]. 吉林大学学报(工学版), 2014, 44(3): 712-717.
[15] LI Xin,WANG Gang,LU Guan-han,GU Zheng-wei,XU Hong. Weldability of 22MnB5 after hot stamping by TIG welding processes [J]. 吉林大学学报(工学版), 2014, 44(3): 708-711.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd