吉林大学学报(工学版) ›› 2013, Vol. 43 ›› Issue (02): 273-277.

Previous Articles     Next Articles

Vehicle longitudinal speed split-phase control

GUAN Xin, CUI Wen-feng, JIA Xin   

  1. State Key Laboratory of Automotive Simulation and Control, Jilin University, Changchun 130022, China
  • Received:2012-05-02 Online:2013-03-01 Published:2013-03-01

Abstract: A vehicle longitudinal speed control algorithm was proposed to be used in vehicle closed-loop simulation or in an autonomous vehicle speed control system. As the vehicle longitudinal motion system is a nonlinear system and the reference speed is a random input, the motion of the vehicle was divided into 5 phases: steady speed control phase, acceleration control phase, emergent acceleration phase, brake control phase and emergent brake phase. Throttle paddle was used only in the first 3 phases, and brake paddle was used only in the last 2 phases. In each specific phase, an anti-integral saturation PID control algorithm or a P algorithm was used. Simulation results showed that the proposed split-phase control was characterized by an accurate vehicle speed-following and a logic switching between a throttle control and a brake control.

Key words: vehicle engineering, autonomous driving, speed control, split-phase, PID control

CLC Number: 

  • U461.1
[1] 高振海,管欣,李谦,等. 基于预瞄跟随理论的驾驶员跟随汽车目标速度的控制模型[J].吉林大学学报:工学版,2002,32(1):1-5. Gao Zhen-hai, Guan Xin, Li Qian, et al. Driver follower control model with vehicle target velocity based on preview follower theory[J]. Journal of Jilin University (Engineering and Technology Edition), 2002, 32(1): 1-5.

[2] Guo Kong-hui, Guan Hsin. Modelling of driv-er/vehicle directional control system[J].Vehicle System Dynamics, 1993, 22(1): 141-184.

[3] Hong M, Ouyang M, Shen T. Torque-based optimal vehicle speed control[J]. International Journal of Automotive Technology, 2011, 12(1): 45-49.

[4] 刘金琨. 先进PID控制MATLAB仿真[M]. 2版. 北京:电子工业出版社, 2004.

[5] Jin Xiao-long, Su Zhi-bao, Zhao Xi-jun, et al. Design of a fuzzy-PID longitudinal controller for autonomous ground vehicle//IEEE International Conference on Vehicular Electronics and Safety(ICVES),Beijing, 2011.

[6] 孙振平. 自主驾驶汽车智能控制系统. 长沙: 国防科学技术大学研究生院, 2004. Sun Zhen-ping. An intelligent control system for autonomous land vehicle. Changsha: College of Post Graduates of National University of Defense Technology, 2004.

[7] Mitschke Manfred, Wallentowitz Henning. 汽车动力学[M]. 陈荫三, 余强, 译. 4版. 北京:清华大学出版社, 2009.

[8] Yi Kyongsu, Moon Ilki, Kwon Young Do. A vehicle-to-vehicle distance control algorithm f-or stop-and-go cruise control//Proc IEEE Int Conf Intelligent Transportation Systems, Oakland, CA, 2001.

[9] 廖晓钟, 刘向东. 控制系统分析与设计[M]. 北京:清华大学出版社, 2008.

[10] 高金源, 夏洁. 计算机控制系统[M]. 北京:清华大学出版社, 2007.

[11] Holzmann Henning, Halfmann C, Drogies S, et al. A rapid prototyping environment for the development and optimization of ACC acceleration control units//International Symposium on Advanced Vehicle Control, Nagoya, Japan, 1998.
[1] CHANG Cheng,SONG Chuan-xue,ZHANG Ya-ge,SHAO Yu-long,ZHOU Fang. Minimizing inverter capacity of doubly-fed machine driving electric vehicles [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1629-1635.
[2] XI Li-he,ZHANG Xin,SUN Chuan-yang,WANG Ze-xing,JIANG Tao. Adaptive energy management strategy for extended range electric vehicle [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1636-1644.
[3] HE Ren,YANG Liu,HU Dong-hai. Design and analysis of refrigeration system supplied by solar auxiliary power of refrigerator car [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1645-1652.
[4] NA Jing-xin,MU Wen-long,FAN Yi-sa,TAN Wei,YANG Jia-zhou. Effect of hygrothermal aging on steel-aluminum adhesive joints for automotive applications [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1653-1660.
[5] LIU Yu-mei,LIU Li,CAO Xiao-ning,XIONG Ming-ye,ZHUANG Jiao-jiao. Construction on collision avoidance model of bogie dynamic simulation test bench [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1661-1668.
[6] ZHAO Wei-qiang, GAO Ke, WANG Wen-bin. Prevention of instability control of commercial vehicle based on electric-hydraulic coupling steering system [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1305-1312.
[7] SONG Da-feng, WU Xi-tao, ZENG Xiao-hua, YANG Nan-nan, LI Wen-yuan. Life cycle cost analysis of mild hybrid heavy truck based on theoretical fuel consumption model [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1313-1323.
[8] ZHU Jian-feng, ZHANG Jun-yuan, CHEN Xiao-kai, HONG Guang-hui, SONG Zheng-chao, CAO Jie. Design modification for automotive body structure based on seat pull safety performance [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1324-1330.
[9] NA Jing-xin, PU Lei-xin, FAN Yi-sa, SHEN Chuan-liang. Effect of temperature and humidity on the failure strength of Sikaflex-265 aluminum adhesive joints [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1331-1338.
[10] WANG Yan, GAO Qing, WANG Guo-hua, ZHANG Tian-shi, YUAN Meng. Simulation of mixed inner air-flow integrated thermal management with temperature uniformity of Li-ion battery [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1339-1348.
[11] JIN Li-sheng, XIE Xian-yi, GAO Lin-lin, GUO Bai-cang. Distributed electric vehicle stability control based on quadratic programming [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1349-1359.
[12] KUI Hai-lin, BAO Cui-zhu, LI Hong-xue, LI Ming-da. Idling time prediction method based on least square support vector machine [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1360-1365.
[13] WANG De-jun, WEI Wei-li, BAO Ya-xin. Actuator fault diagnosis of ESC system considering crosswind interference [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1548-1555.
[14] HU Man-jiang, LUO Yu-gong, CHEN Long, LI Ke-qiang. Vehicle mass estimation based on longitudinal frequency response characteristics [J]. 吉林大学学报(工学版), 2018, 48(4): 977-983.
[15] LIU Guo-zheng, SHI Wen-ku, Chen Zhi-yong. Finite element analysis of transmission error for hypoid gears considering installation error [J]. 吉林大学学报(工学版), 2018, 48(4): 984-989.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!