吉林大学学报(工学版) ›› 2012, Vol. 42 ›› Issue (增刊1): 216-220.

Previous Articles     Next Articles

Research on the transverse knurling connection mechanism of assembled camshaft and numerical simulation analysis on the press mounting and torsion process

ZHANG Chi1, XU Pei-juan2, He Dong-ye1, NIE Xuan1   

  1. 1. Roll Forging Institute, Jilin University, Changchun 130022, China;
    2. College of Computer Science and Technology, Jilin University, Changchun 130012, China
  • Received:2012-02-04 Online:2012-09-01 Published:2012-09-01

PDF (PC)

365

Abstract: The transverse knurling connection mechanism was discussed. The press mounting and static torsional experiments on the transverse knurling connection were performed. The factors which affect the torsional strength were analyzed. Furthermore the research was also done by numerical simulation. The results show that, the magnitude of interference was the most significant factor which affected the torsional strength.

Key words: materials synthesis and processing technology, assembled camshaft, transverse knurling connection, connection mechanism, press mounting force, torsional strength

CLC Number: 

  • TG413.4
[1] 张驰,杨慎华,寇淑清.装配式凸轮轴生产工艺及应用[J].汽车技术,2004(1):32-34. Zhang Chi, Yang Seng-hua. Kou Shu-qing. Production process and application of packaged type camshaft[J]. Automobile Technology, 2004(1):32-34.

[2] 杨慎华,张驰,寇淑清,等.装配式凸轮轴制造技术现状与发展趋势[J].内燃机工程,2004, 25(2):32-34. Yang Seng-hua. Zhang Chi, Kou Shu-qing, et al. Present status and trends of assembled camshaft technology[J].Internal Combustion Engine Engineering, 2004, 25(2):32-34.

[3] Muller H,et al. Thermal shrink fit process for composite camshafts[J]. Auto Engineering, 1997,105(9):76-78.

[4] Yoshikatsu Nakamura, Yasuyoshi Egami, Koichi Shimizu. Development of an assembled camshaft by mechanical bonding[J]. SAE, 1996,960302:109-116.

[5] 张驰,何东野,邓春萍,等.滚花连接装配式凸轮轴连接机理及生产新工艺[J].汽车技术,2008(9):53-55. Zhang Chi,He Dong-ye, Deng Chun-ping,et al.The jointing mechanism and new production process of knurling jointing assembled cmshaft[J]. Automobile Technology, 2008(9):53-55.

[6] 张驰,杨慎华,徐沛娟,等.滚花装配式凸轮轴压装力实验研究及计算机分析[J].吉林大学学报:工学版,2003(增刊):176-178. Zhang Chi,Yang Shen-hua,Xu Pei-juan,et al.A assembled force experiment research and computer analysis for the shaving joining assembled camshaft[J].Journal of Jilin University,2003(Sup.):176-178.

[7] 朱立光,路文刚.GCr15轴承钢高温力学性能的研究[J].特殊钢,2007,28(4):7-9. Zhu Li-guang,Lu Wen-gang.A study on high temperature mechanical properties of GCr15 bearing steel[J].Special Steel,2007,28(4):7-9.

[8] Facchinei F, Jiang H, Qi L. A smoothing method for mathematical programs with equilibrium constraints[J]. Mathematical Programming ,1999,85(1):107-134.
[1] JIANG Qiu-yue,YANG Hai-feng,TAN Cai-wang. Strengthening properties of welded joints of 22MnB5 super high strength steel [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1806-1810.
[2] HU Zhi-qing, YAN Ting-xu, LI Hong-jie, LYU Zhen-hua, LIAO Wei, LIU Geng. Effect of cryogenic treatment on punch-shearing performance of aluminum alloy sheet [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1524-1530.
[3] QIU Xiao-ming, WANG Yin-xue, YAO Han-wei, FANG Xue-qing, XING Fei. Multi-objective optimization of resistance spot welding parameters for DP1180/DP590 using grey relational analysis based Taguchi [J]. 吉林大学学报(工学版), 2018, 48(4): 1147-1152.
[4] CHEN Jun-fu, GUAN Zhi-ping, YANG Chang-hai, NIU Xiao-ling, JIANG Zhen-tao, Song Yu-quan. Comparison of strain ranges and mechanical properties of metal rods under tension and torsion tests [J]. 吉林大学学报(工学版), 2018, 48(4): 1153-1160.
[5] LIANG Xiao-bo, CAI Zhong-yi, GAO Peng-fei. Numerical simulation and experiment of cylindrical forming of sandwich composite panel [J]. 吉林大学学报(工学版), 2018, 48(3): 828-834.
[6] LIU Zi-wu, LI Jian-feng. Erosion damage and evaluation of remanufacturing cladding layer for impeller metals FV520B [J]. 吉林大学学报(工学版), 2018, 48(3): 835-844.
[7] LIU Chun-guo, LIU Wei-dong, DENG Yu-shan. Effect of multi-point punch active loading path on the stretch-forming of sheet [J]. 吉林大学学报(工学版), 2018, 48(1): 221-228.
[8] LYU Meng-meng, GU Zheng-wei, XU Hong, LI Xin. Process optimization of hot stamping for anti-collision beam with ultra high strength [J]. 吉林大学学报(工学版), 2017, 47(6): 1834-1841.
[9] XING Hai-yan, GE Hua, LI Si-qi, YANG Wen-guang, SUN Xiao-jun. Hidden defect metal magnetic memory identification for welded joints based on fuzzy membership and maximum likelihood estimation [J]. 吉林大学学报(工学版), 2017, 47(6): 1854-1860.
[10] GU Xiao-yan, LIU Ya-jun, SUN Da-qian, XU Feng, MENG Ling-shan, GAO Shuai. Microstructures and mechanical properties of transient liquid phase diffusion bonded S355 steel/6005A aluminum alloy joint [J]. 吉林大学学报(工学版), 2017, 47(5): 1534-1541.
[11] GU Zheng-wei, ZHANG Wen-xue, LYU Meng-meng, WANG Wei, XU Hong, LI Xin. Stretch bending defect control of U-section stainless steel profile with wide flange [J]. 吉林大学学报(工学版), 2017, 47(4): 1165-1170.
[12] GU Zheng-wei, LYU Meng-meng, ZHANG Wen-xue, LEI Jiao-jiao, XU Hong. Stamping of front-end three-dimensional skin of China electric multiple units [J]. 吉林大学学报(工学版), 2017, 47(3): 869-875.
[13] YANG Xin-hui, XUE Wei, GUO Nan. Bending performance of glued-lumber beam reinforced with steel plate [J]. 吉林大学学报(工学版), 2017, 47(2): 468-477.
[14] LIANG Ji-cai, LI Yi, GAO Song, TENG Fei. Springback prediction for multi-point 3D stretch bending profile [J]. 吉林大学学报(工学版), 2017, 47(1): 185-190.
[15] XU Hong, LIU Ya-nan, YU Ting, GU Zheng-wei, LI Xiang-ji, ZHANG Zhi-qiang. Inelastic recovery behavior and microscopic mechanism of high strength DP780 steel during cyclic loading-unloading [J]. 吉林大学学报(工学版), 2017, 47(1): 191-198.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd