吉林大学学报(工学版) ›› 2015, Vol. 45 ›› Issue (2): 501-507.doi: 10.13229/j.cnki.jdxbgxb201502025
• Orignal Article • Previous Articles Next Articles
FU Jun1,2,QIAN Zhi-hui1,2,YIN Wei1,2,WANG Jia-jia1,2,REN Lu-quan1,2
CLC Number:
[1] Ray S, Roy R, Mondal A K. Post harvest grain loss in paddy field of south West Bengal: a comparative analysis of general and traditional cultivation[J]. Environment and Ecology, 2013, 31(3): 1279-1283. [2] Eroglu M C, Ogut H, Turker U. Effects of some operational parameters in combine harvesters on grain loss and comparison between sensor and conventional measurement method[J]. Energy Education Science and Technology Part A, 2011, 28(1): 497-504. [3] 唐忠,李耀明,赵湛,等. 切纵流联合收获机小麦夹带损失检测试验与分析[J].农业工程学报,2012,28(1):11-16. Tang Zhong, Li Yao-ming, Zhao Zhan, et al. Test and analysis of wheat entrainment loss for tangential-longitudinal-axial combine harvester[J]. Transactions of the Chinese Society of Agricultural Engineering, 2012, 28(1): 11-16. [4] 唐忠, 李耀明, 徐立章, 等. 切纵流联合收获机小麦脱粒分离性能评价与试验[J].农业工程学报, 2012, 28(3): 14-19. Tang Zhong, Li Yao-ming, Xu Li-zhang, et al. Experiment and evaluating indicators of wheat threshing and separating on test-bed of longitudinal axial-threshing unit[J].Transactions of the Chinese Society of Agricultural Engineering, 2012, 28(3): 14-19. [5] 袁琦堡,师清翔,王国欣,等. 短程高强度横向轴流脱粒装置参数优化[J].农业机械学报, 2011,42(1):43-48. Yuan Qi-bao, Shi Qing-xiang, Wang Guo-xin, et al. Parameters optimization of short-range high-strength transverse axial threshing unit[J]. Transactions of the Chinese Society for Agricultural Machinery,2011,42(1):43-48. [6] 李耀明,梁振伟,赵湛,等. 联合收获机籽粒损失监测传感器性能标定试验[J].农业机械学报,2012,43(10):75-84. Li Yao-ming, Liang Zhen-wei, Zhao Zhan, et al. Calibration experiment of grain loss monitoring sensor in combine harvester[J]. Transactions of the Chinese Society for Agricultural Machinery, 2012,43(10): 75-84. [7] Patel S K, Varshney B P. Modeling of wheat crop harvesting losses[J]. Agricultural Engineering International: CIGR Journal, 2014,16(2): 97-102. [8] Shahbazi F, Dolwlatshah A, Valizadeh S. Mechanical damage to wheat and triticale seeds related to moisture content and impact energy[J]. Agricultural Engineering International: CIGR Journal, 2012, 14(4): 150-155. [9] Saeidirad M H, Javadi A. Study on machine-crop parameters of cylinder threshers for cumin threshing[J]. Agricultural Engineering International: CIGR Journal, 2011, 13(2):32-36. [10] Ren Lu-quan. Progress in the bionic study on anti-adhesion and resistance reduction of terrain machines[J]. Science in China Series E: Technological Sciences, 2009, 52(2): 273-284. |
[1] | YU Liang, LI He-yan, MA Biao, LI Hui-zhu, LI Ming-yang. Analysis and verification for average axial pressure attenuation of multi-disc clutch [J]. 吉林大学学报(工学版), 2018, 48(4): 990-997. |
[2] | ZHAO Er-hui, MA Biao, LI He-yan, DU Qiu, WU Jian-peng, MA Cheng-nan. Effect of non-uniform contact on friction characteristics of wet clutches [J]. 吉林大学学报(工学版), 2018, 48(3): 661-669. |
[3] | JIN Chao-qiong, ZHANG Bao, LI Xian-tao, SHEN Shuai, ZHU Feng. Friction compensation strategy of photoelectric stabilized platform based on disturbance observer [J]. 吉林大学学报(工学版), 2017, 47(6): 1876-1885. |
[4] | LIU Han-bing, ZHANG Hu-zhu, WANG Jing. Effect of dehydration on shear strength properties of compacted clayey soil [J]. 吉林大学学报(工学版), 2017, 47(2): 446-451. |
[5] | LI Shen-long, LIU Shu-cheng, XING Qing-kun, ZHANG Jing, LAI Yu-yang. Clutch friction pair motion effect caused by oil flow based on LBM-LES [J]. 吉林大学学报(工学版), 2017, 47(2): 490-497. |
[6] | GUAN Qing-feng, HUANG Wei, LI Huai-fu, GONG Xiao-hua, ZHANG Cong-lin, LYU Peng. Diffusion alloying of Cu-C induced by high current pulsed electron beam [J]. 吉林大学学报(工学版), 2016, 46(6): 1967-1973. |
[7] | CHEN Jian, GE Lian-zheng, LI Rui-feng. Design of robust controller for robot flexible joint with friction characteristic [J]. 吉林大学学报(工学版), 2015, 45(6): 1906-1912. |
[8] | ZHAO Jian, ZHANG Jin, ZHU Bing. Fuzzy sliding mode traction control based on road friction coefficient estimation [J]. 吉林大学学报(工学版), 2015, 45(4): 1036-1042. |
[9] | LUO Hai-tao, ZHOU Wei-jia, WANG Hong-guang, WU Jia-feng. Mechanical analysis of friction stir welding robot under typical working conditions [J]. 吉林大学学报(工学版), 2015, 45(3): 884-891. |
[10] | YANG Li-kun,LI He-yan,MA Biao. Improved drag torque model for wet clutch [J]. 吉林大学学报(工学版), 2014, 44(5): 1270-1275. |
[11] | ZHENG Hong-yu, CHEN Guo-ying, SUN Lin-lin, KONG Fan-sen, HE Lei, ZONG Chang-fu. Tire-road friction coefficient estimation based on steer-by-wire system [J]. 吉林大学学报(工学版), 2014, 44(2): 292-295. |
[12] | WU Bin, LI Jun, LI Kang, HOU Fu-jian, JIANG Wen-hu. Optimization design and experiment of low friction engine [J]. 吉林大学学报(工学版), 2014, 44(01): 81-85. |
[13] | LI Wen-liang, WANG Li-qin, CHANG Shan, DAI Guang-hao. Impact of tooth surface friction on harmonic resonance of gear system [J]. 吉林大学学报(工学版), 2013, 43(05): 1290-1294. |
[14] | GUAN Xin, TIAN Lei, PANG Shu-yi, XU Xiao-mei. Development of a steer model based the assemble characteristic [J]. 吉林大学学报(工学版), 2013, 43(03): 571-576. |
[15] | MA Bin, XU Hong-guo, LIU Hong-fei. Effects of road surface fractal and rubber characteristics on tire sliding friction factor [J]. 吉林大学学报(工学版), 2013, 43(02): 317-322. |
|