吉林大学学报(工学版) ›› 2015, Vol. 45 ›› Issue (2): 501-507.doi: 10.13229/j.cnki.jdxbgxb201502025

• Orignal Article • Previous Articles     Next Articles

Experimental study of friction and tensile properties of wheat

FU Jun1,2,QIAN Zhi-hui1,2,YIN Wei1,2,WANG Jia-jia1,2,REN Lu-quan1,2   

  1. 1.College of Biological and Agricultural Engineering, Jilin University, Changchun 130022, China;
    2.Key Laboratory of Bionic Engineering of Ministry of Education,Jilin University,Changchun 130022,China
  • Received:2014-06-05 Online:2015-04-01 Published:2015-04-01

RICH HTML

0   

PDF (PC)

396

Abstract:

To overcome the problems in wheat harvesting machine such as loss, damage, high impurity rate, fracture and adhesion, the friction and tensile properties of wheat were studied by experiments. The 'Jinan wheat 20' was used as subject. The moisture content of the wheat was 36.16% measured with a PM-8188 grain moisture tester. The static friction coefficient was measured on a mechanical static friction test bench. The tensile curve was obtained using a QT-1186 electronic testing machine. Results show that the static friction between rubber and wheat is higher than other materials. So the bionic reel and threshing mechanism made of rubber could increase the static friction force. The tensile strength gradually increases from the bottom to top. Using horizontal rotation rub threshing process and bionic cutting parts could improve the threshing performance and reduce the impurity rate with lower power consumption.

Key words: agricultural mechanization engineering, harvest machinery, friction, wheat, tension property

CLC Number: 

  • S225.3
[1] Ray S, Roy R, Mondal A K. Post harvest grain loss in paddy field of south West Bengal: a comparative analysis of general and traditional cultivation[J]. Environment and Ecology, 2013, 31(3): 1279-1283.
[2] Eroglu M C, Ogut H, Turker U. Effects of some operational parameters in combine harvesters on grain loss and comparison between sensor and conventional measurement method[J]. Energy Education Science and Technology Part A, 2011, 28(1): 497-504.
[3] 唐忠,李耀明,赵湛,等. 切纵流联合收获机小麦夹带损失检测试验与分析[J].农业工程学报,2012,28(1):11-16.
Tang Zhong, Li Yao-ming, Zhao Zhan, et al. Test and analysis of wheat entrainment loss for tangential-longitudinal-axial combine harvester[J]. Transactions of the Chinese Society of Agricultural Engineering, 2012, 28(1): 11-16.
[4] 唐忠, 李耀明, 徐立章, 等. 切纵流联合收获机小麦脱粒分离性能评价与试验[J].农业工程学报, 2012, 28(3): 14-19.
Tang Zhong, Li Yao-ming, Xu Li-zhang, et al. Experiment and evaluating indicators of wheat threshing and separating on test-bed of longitudinal axial-threshing unit[J].Transactions of the Chinese Society of Agricultural Engineering, 2012, 28(3): 14-19.
[5] 袁琦堡,师清翔,王国欣,等. 短程高强度横向轴流脱粒装置参数优化[J].农业机械学报, 2011,42(1):43-48.
Yuan Qi-bao, Shi Qing-xiang, Wang Guo-xin, et al. Parameters optimization of short-range high-strength transverse axial threshing unit[J]. Transactions of the Chinese Society for Agricultural Machinery,2011,42(1):43-48.
[6] 李耀明,梁振伟,赵湛,等. 联合收获机籽粒损失监测传感器性能标定试验[J].农业机械学报,2012,43(10):75-84.
Li Yao-ming, Liang Zhen-wei, Zhao Zhan, et al. Calibration experiment of grain loss monitoring sensor in combine harvester[J]. Transactions of the Chinese Society for Agricultural Machinery, 2012,43(10): 75-84.
[7] Patel S K, Varshney B P. Modeling of wheat crop harvesting losses[J]. Agricultural Engineering International: CIGR Journal, 2014,16(2): 97-102.
[8] Shahbazi F, Dolwlatshah A, Valizadeh S. Mechanical damage to wheat and triticale seeds related to moisture content and impact energy[J]. Agricultural Engineering International: CIGR Journal, 2012, 14(4): 150-155.
[9] Saeidirad M H, Javadi A. Study on machine-crop parameters of cylinder threshers for cumin threshing[J]. Agricultural Engineering International: CIGR Journal, 2011, 13(2):32-36.
[10] Ren Lu-quan. Progress in the bionic study on anti-adhesion and resistance reduction of terrain machines[J]. Science in China Series E: Technological Sciences, 2009, 52(2): 273-284.
[1] YU Liang, LI He-yan, MA Biao, LI Hui-zhu, LI Ming-yang. Analysis and verification for average axial pressure attenuation of multi-disc clutch [J]. 吉林大学学报(工学版), 2018, 48(4): 990-997.
[2] ZHAO Er-hui, MA Biao, LI He-yan, DU Qiu, WU Jian-peng, MA Cheng-nan. Effect of non-uniform contact on friction characteristics of wet clutches [J]. 吉林大学学报(工学版), 2018, 48(3): 661-669.
[3] JIN Chao-qiong, ZHANG Bao, LI Xian-tao, SHEN Shuai, ZHU Feng. Friction compensation strategy of photoelectric stabilized platform based on disturbance observer [J]. 吉林大学学报(工学版), 2017, 47(6): 1876-1885.
[4] LIU Han-bing, ZHANG Hu-zhu, WANG Jing. Effect of dehydration on shear strength properties of compacted clayey soil [J]. 吉林大学学报(工学版), 2017, 47(2): 446-451.
[5] LI Shen-long, LIU Shu-cheng, XING Qing-kun, ZHANG Jing, LAI Yu-yang. Clutch friction pair motion effect caused by oil flow based on LBM-LES [J]. 吉林大学学报(工学版), 2017, 47(2): 490-497.
[6] GUAN Qing-feng, HUANG Wei, LI Huai-fu, GONG Xiao-hua, ZHANG Cong-lin, LYU Peng. Diffusion alloying of Cu-C induced by high current pulsed electron beam [J]. 吉林大学学报(工学版), 2016, 46(6): 1967-1973.
[7] CHEN Jian, GE Lian-zheng, LI Rui-feng. Design of robust controller for robot flexible joint with friction characteristic [J]. 吉林大学学报(工学版), 2015, 45(6): 1906-1912.
[8] ZHAO Jian, ZHANG Jin, ZHU Bing. Fuzzy sliding mode traction control based on road friction coefficient estimation [J]. 吉林大学学报(工学版), 2015, 45(4): 1036-1042.
[9] LUO Hai-tao, ZHOU Wei-jia, WANG Hong-guang, WU Jia-feng. Mechanical analysis of friction stir welding robot under typical working conditions [J]. 吉林大学学报(工学版), 2015, 45(3): 884-891.
[10] YANG Li-kun,LI He-yan,MA Biao. Improved drag torque model for wet clutch [J]. 吉林大学学报(工学版), 2014, 44(5): 1270-1275.
[11] ZHENG Hong-yu, CHEN Guo-ying, SUN Lin-lin, KONG Fan-sen, HE Lei, ZONG Chang-fu. Tire-road friction coefficient estimation based on steer-by-wire system [J]. 吉林大学学报(工学版), 2014, 44(2): 292-295.
[12] WU Bin, LI Jun, LI Kang, HOU Fu-jian, JIANG Wen-hu. Optimization design and experiment of low friction engine [J]. 吉林大学学报(工学版), 2014, 44(01): 81-85.
[13] LI Wen-liang, WANG Li-qin, CHANG Shan, DAI Guang-hao. Impact of tooth surface friction on harmonic resonance of gear system [J]. 吉林大学学报(工学版), 2013, 43(05): 1290-1294.
[14] GUAN Xin, TIAN Lei, PANG Shu-yi, XU Xiao-mei. Development of a steer model based the assemble characteristic [J]. 吉林大学学报(工学版), 2013, 43(03): 571-576.
[15] MA Bin, XU Hong-guo, LIU Hong-fei. Effects of road surface fractal and rubber characteristics on tire sliding friction factor [J]. 吉林大学学报(工学版), 2013, 43(02): 317-322.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd