吉林大学学报(工学版) ›› 2018, Vol. 48 ›› Issue (3): 661-669.doi: 10.13229/j.cnki.jdxbgxb20161386

• Orginal Article • Previous Articles     Next Articles

Effect of non-uniform contact on friction characteristics of wet clutches

ZHAO Er-hui1, MA Biao1,2, LI He-yan1,2, DU Qiu1, WU Jian-peng1, MA Cheng-nan1   

  1. 1.School of Mechanical Engineering, Beijing Institute of Technology, Beijing 100081, China;
    2.Collaborative Innovation Center of Electric Vehicles in Beijing, Beijing 100081, China
  • Received:2016-12-21 Online:2018-05-20 Published:2018-05-20

RICH HTML

3   

PDF (PC)

395

Abstract: The non-uniform contact states of friction pairs are simulated by the different contact ratio. A lubrication model of the friction pair is proposed and corresponding tests are conducted on a wet clutch comprehensive test bench. The results simulations and tests show that, as the contact ratio reduces the surface temperature of friction pair increases obviously, and the local friction coefficient and total friction coefficient increase dramatically, so that the local friction torque grows significantly. In addition, the vibration of the output torque becomes more severe when the contact ratio reduces. Therefore, the non-uniform contact after thermal buckling severely deteriorates the friction properties of the friction pairs, and accelerates the failure of the wet clutches.

Key words: vehicle engineering, wet clutch, Cu-based friction pair, friction characteristics

CLC Number: 

  • U463.2
[1] Zhao J,Ma B,Li H,et al.The effect of lubrication film thickness on thermoelastic instability under fluid lubricating condition[J]. Wear,2013,303(1):146-153.
[2] Anderson A E,Knapp R A.Hot spotting in automotive friction systems[J]. Wear,1990,135(2):319-337.
[3] Kao T K,Richmond J W,Douarre A.Brake disc hot spotting and thermal judder: an experimental and finite element study[J]. International Journal of Vehicle Design,2000,23(3/4):276-296.
[4] 张志刚,周晓军,沈路,等. 湿式离合器动态接合特性的仿真与试验[J]. 中国公路学报,2010,23(3):115-120.
Zhang Zhi-gang,Zhou Xiao-jun,Shen Lu, et al.Simulation and experiment on dynamic engagement characteristics of wet clutch[J]. China Journal of Highway and Transport,2010,23(3):115-120.
[5] Iqbal S,Al-Bender F,Ompusunggu A P,et al.Modeling and analysis of wet friction clutch engagement dynamics[J]. Mechanical Systems and Signal Processing,2015,60:420-436.
[6] Ingram M, Reddyhoff T, Spikes H A.Thermal behaviour of a slipping wet clutch contact[J]. Tribology Letters,2011,41(1):23-32.
[7] 杨勇强,李小莹,曹博涛, 等. 湿式摩擦离合器摩擦片的热力耦合分析[J]. 机械传动, 2016, 40(1): 153-156.
Yang Yong-qiang,Li Xiao-ying,Cao Bo-tao, et al.Thermo-mechanical coupling analysis of friction plate of wet friction clutch[J]. Journal of Mechanical Transmission,2016,40(1):153-156.
[8] Cenbo X, Biao M, Heyan L, et al.Experimental Study and thermal analysis on the buckling of friction components in multi-disc clutch[J]. Journal of Thermal Stresses,2015,38(11):1323-1343.
[9] Zhao J,Chen Z,Yang H,et al.Finite element analysis of thermal buckling in automotive clutch plates[J]. Journal of Thermal Stresses,2016,39(1):77-89.
[10] 赵家昕,马彪,李和言,等. 湿式离合器接合过程中的热弹性稳定性[J]. 吉林大学学报:工学版,2015,45(1):22-28.
Zhao Jia-xin, Ma Biao, Li He-yan, et al.Thermoelastic stability of wet clutches during engaging process[J]. Journal of Jilin University(Engineering and Technology Edition), 2015,45(1):22-28.
[11] Li Wen-bin,Huang Jian-feng,Fei Jie,et al.Study on tribological properties as a function of operating conditions for carbon fabric wet clutch[J]. Tribology International,2016,94:428-436.
[12] 陈思华,杨翔宇,任志鹏. 离合器摩擦片摩擦特性试验研究[J]. 润滑与密封,2016,41(5):113-116.
Chen Si-hua, Yang Xiang-yu, Ren Zhi-peng.Experimental research on clutch plate friction characteristics[J]. Lubrication Engineering,2016,41(5):113-116.
[13] Dzierwa A.Influence of surface preparation on surface topography and tribological behaviours[J]. Archives of Civil and Mechanical Engineering,2017,17(3):502-510.
[14] Dowson D.A generalized Reynolds equation for fluid-film lubrication[J]. International Journal of Mechanical Sciences,1962,4(2):159-170.
[15] Wang W, Wang S, Shi F, et al.Simulations and measurements of sliding friction between rough surfaces in point contacts: from EHL to boundary lubrication[J]. Journal of Tribology,2007,129(3):495-501.
[16] Carslaw H S, Jaeger J C.Conduction of Heat in Solids[M]. 2nd ed. Oxford: Clarendon Press,1959:266-270.
[17] Xin R C, Tao W Q.Analytical solution for transient heat conduction in two semi-infinite bodies in contact[J]. Journal of Heat Transfer,1994,116(1):224-228.
[1] CHANG Cheng,SONG Chuan-xue,ZHANG Ya-ge,SHAO Yu-long,ZHOU Fang. Minimizing inverter capacity of doubly-fed machine driving electric vehicles [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1629-1635.
[2] XI Li-he,ZHANG Xin,SUN Chuan-yang,WANG Ze-xing,JIANG Tao. Adaptive energy management strategy for extended range electric vehicle [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1636-1644.
[3] HE Ren,YANG Liu,HU Dong-hai. Design and analysis of refrigeration system supplied by solar auxiliary power of refrigerator car [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1645-1652.
[4] NA Jing-xin,MU Wen-long,FAN Yi-sa,TAN Wei,YANG Jia-zhou. Effect of hygrothermal aging on steel-aluminum adhesive joints for automotive applications [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1653-1660.
[5] LIU Yu-mei,LIU Li,CAO Xiao-ning,XIONG Ming-ye,ZHUANG Jiao-jiao. Construction on collision avoidance model of bogie dynamic simulation test bench [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1661-1668.
[6] ZHAO Wei-qiang, GAO Ke, WANG Wen-bin. Prevention of instability control of commercial vehicle based on electric-hydraulic coupling steering system [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1305-1312.
[7] SONG Da-feng, WU Xi-tao, ZENG Xiao-hua, YANG Nan-nan, LI Wen-yuan. Life cycle cost analysis of mild hybrid heavy truck based on theoretical fuel consumption model [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1313-1323.
[8] ZHU Jian-feng, ZHANG Jun-yuan, CHEN Xiao-kai, HONG Guang-hui, SONG Zheng-chao, CAO Jie. Design modification for automotive body structure based on seat pull safety performance [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1324-1330.
[9] NA Jing-xin, PU Lei-xin, FAN Yi-sa, SHEN Chuan-liang. Effect of temperature and humidity on the failure strength of Sikaflex-265 aluminum adhesive joints [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1331-1338.
[10] WANG Yan, GAO Qing, WANG Guo-hua, ZHANG Tian-shi, YUAN Meng. Simulation of mixed inner air-flow integrated thermal management with temperature uniformity of Li-ion battery [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1339-1348.
[11] JIN Li-sheng, XIE Xian-yi, GAO Lin-lin, GUO Bai-cang. Distributed electric vehicle stability control based on quadratic programming [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1349-1359.
[12] KUI Hai-lin, BAO Cui-zhu, LI Hong-xue, LI Ming-da. Idling time prediction method based on least square support vector machine [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1360-1365.
[13] WANG De-jun, WEI Wei-li, BAO Ya-xin. Actuator fault diagnosis of ESC system considering crosswind interference [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1548-1555.
[14] HU Man-jiang, LUO Yu-gong, CHEN Long, LI Ke-qiang. Vehicle mass estimation based on longitudinal frequency response characteristics [J]. 吉林大学学报(工学版), 2018, 48(4): 977-983.
[15] LIU Guo-zheng, SHI Wen-ku, Chen Zhi-yong. Finite element analysis of transmission error for hypoid gears considering installation error [J]. 吉林大学学报(工学版), 2018, 48(4): 984-989.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] LIU Song-shan, WANG Qing-nian, WANG Wei-hua, LIN Xin. Influence of inertial mass on damping and amplitude-frequency characteristic of regenerative suspension[J]. 吉林大学学报(工学版), 2013, 43(03): 557 -563 .
[2] CHU Liang, WANG Yan-bo, QI Fu-wei, ZHANG Yong-sheng. Control method of inlet valves for brake pressure fine regulation[J]. 吉林大学学报(工学版), 2013, 43(03): 564 -570 .
[3] LI Jing, WANG Zi-han, YU Chun-xian, HAN Zuo-yue, SUN Bo-hua. Design of control system to follow vehicle state with HIL test beach[J]. 吉林大学学报(工学版), 2013, 43(03): 577 -583 .
[4] HU Xing-jun, LI Teng-fei, WANG Jing-yu, YANG Bo, GUO Peng, LIAO Lei. Numerical simulation of the influence of rear-end panels on the wake flow field of a heavy-duty truck[J]. 吉林大学学报(工学版), 2013, 43(03): 595 -601 .
[5] WANG Tong-jian, CHEN Jin-shi, ZHAO Feng, ZHAO Qing-bo, LIU Xin-hui, YUAN Hua-shan. Mechanical-hydraulic co-simulation and experiment of full hydraulic steering systems[J]. 吉林大学学报(工学版), 2013, 43(03): 607 -612 .
[6] ZHANG Chun-qin, JIANG Gui-yan, WU Zheng-yan. Factors influencing motor vehicle travel departure time choice behavior[J]. 吉林大学学报(工学版), 2013, 43(03): 626 -632 .
[7] MA Wan-jing, XIE Han-zhou. Integrated control of main-signal and pre-signal on approach of intersection with double stop line[J]. 吉林大学学报(工学版), 2013, 43(03): 633 -639 .
[8] YU De-xin, TONG Qian, YANG Zhao-sheng, GAO Peng. Forecast model of emergency traffic evacuation time under major disaster[J]. 吉林大学学报(工学版), 2013, 43(03): 654 -658 .
[9] XIAO Yun, LEI Jun-qing, ZHANG Kun, LI Zhong-san. Fatigue stiffness degradation of prestressed concrete beam under multilevel amplitude cycle loading[J]. 吉林大学学报(工学版), 2013, 43(03): 665 -670 .
[10] XIAO Rui, DENG Zong-cai, LAN Ming-zhang, SHEN Chen-liang. Experiment research on proportions of reactive powder concrete without silica fume[J]. 吉林大学学报(工学版), 2013, 43(03): 671 -676 .
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd