吉林大学学报(工学版) ›› 2015, Vol. 45 ›› Issue (4): 1175-1180.doi: 10.13229/j.cnki.jdxbgxb201504022

Previous Articles     Next Articles

Transmission interference and meshing simulation of double helical synchronous belt

GUO Jian-hua1, 2, JIANG Hong-yuan1, HU Qing-ming2, LI Jia-bo2   

  1. 1.School of Mechatronics Engineering,Harbin Institute of Technology,Harbin 150001,China;
    2.School of Mechanical and Electronic Engineering,Qiqihar University,Qiqihar 161006,China
  • Received:2013-11-09 Online:2015-07-01 Published:2015-07-01

Abstract: A new method was put forward based on Westhoff meshing transmission interference evaluation system. The method was used to judge whether there exists interference between the enveloping tooth profile and pulley tooth groove of the double helical synchronous belt transmission. Then a new double helical synchronous belt was designed and the conjugated tooth profile transmission model was induced on the basis of the double helical transmission characteristics. It is shown that there is no meshing interference in the new double helical synchronous belt compared with the Eagle PD; the higher and steeper the belt tooth, the stronger the resistance ability to climb. The new normal tooth profile is effective to improve the contacting strength while the radius is larger and the instant engagement line is longer, where the point of the conjugated circular arc is on the pitch line.

Key words: technology of instrument and meter, double helical synchronous belt transmission, eagle PD, transmission interference and simulation, conjugated tooth profile, circular arc tooth

CLC Number: 

  • TH132.3
[1] Ueda H, Kagotani M, Koyama T, et al. Noise and life of helical timing belt drives[J]. Transactions of the ASME, 1999, 121(6): 274-279.
[2] Gregg Michael J W. Synchronous drive belt using helical offset teeth[C]∥The Meeting of the Rubber Division, American Chemical Society, Chicago, 1999.
[3] Ayax E, Huot S, Play D, et al. Numerical simulation of timing belt camshaft layout[C]∥ABAQUS Users' Conference, Germany, 2003.
[4] Westhoff W L. Toothed belt and sprocket[P].United States Patent:4605389,1986-08-12.
[5] Miller Henry F, Clifton N J. Positive power transmission system[P]. United States Patent:3756091,1973-09-04.
[6] Cicognani M. Toothed belt[P]. United States Patent:3937094,1976-02-10.
[7] Guo Jian-hua, Jiang Hong-yuan, Han Gang, et al. A new design of tooth profiles increases synchronous belt's fatigue life[C]∥ASME 2008 International Mechanical Engineering Congress and Exposition,Boston,USA,2008:161-169.
[8] 郭建华,郑娜,姜洪源,等. 基于ANSYS的新型人字齿同步带受力分析[J]. 机械传动, 2012,36(2): 60-62. Guo Jian-hua, Zheng Na, Jiang Hong-yuan, et al. The finite element analysis of double helical synchronous belt based on ANSYS[J]. Journal of Mechanical Transmission, 2012, 36(2): 60-62.
[9] 姜洪源,郭建华. 基于高阶接触啮合理论的新 型人字齿同步带传动设计[J]. 机械传动, 2013,37(8):17-21. Jiang Hong-yuan, Guo Jian-hua. Double helical synchronous belt transmission design based on theory of high degree contact mesh[J]. Journal of Mechanical Transmission, 2013, 37 (8): 17-21.
[10] GB/T 24619-2009. 曲线齿同步带传动[S]. 北京:国家标准化管理委员会, 2009.
[11] 李特文. 齿轮啮合原理[M]. 上海:上海科学技术出版社, 1984.
[1] QIU Yan-kai, LI Bao-ren, YANG Gang, CAO Bo, LIU Zhen. Characteristics and mechanism reducing pressure ripple of hydraulic system with novel hydraulic muffler [J]. 吉林大学学报(工学版), 2018, 48(4): 1085-1091.
[2] WU Jiang, XU Zhuang, LIU Li-jia, JI Yan-ju, LI Su-yi. Peripheral oxygen saturation detecting prototype applied in sleep apnea syndrome [J]. 吉林大学学报(工学版), 2018, 48(2): 640-644.
[3] YANG Cheng, SONG Ping, PENG Wen-jia, JIN Hao-long, PAN Zhi-qiang. Design of armored vehicle integrated test system based on hybrid bus [J]. 吉林大学学报(工学版), 2018, 48(1): 186-198.
[4] YANG Cheng, SONG Ping, PENG Wen-jia, DENG Gao-shou, LIU Xiong-jun. Design of host computer platform for armored vehicle integrated test system [J]. 吉林大学学报(工学版), 2017, 47(6): 1796-1803.
[5] WANG Tian-hao, WANG Zhong-fu, WANG Yu-meng, YANG Kai-yu, GAO Yin-han, MA Xi-lai. Statistic analysis of cable bundle crosstalk based on polynomial chaos expansion [J]. 吉林大学学报(工学版), 2017, 47(5): 1568-1576.
[6] LIU Xiao-wei, LI Hai, WENG Rui, ZHANG Hai-feng, ZHAO Jun. Application of electrostatic torque to improve dynamic characteristics of novel rotational gyroscope [J]. 吉林大学学报(工学版), 2017, 47(3): 850-854.
[7] LIN Jun, ZHAO Yue, JIANG Chuan-dong, WANG Ying-ji. New surface MRS method based on optimized Block inversion [J]. 吉林大学学报(工学版), 2017, 47(2): 530-539.
[8] ZHANG Fei, SHAN Zhong-de, REN Yong-xin, NIE Jun-gang, LIU Feng. Calibration of line array camera for head defect detection system on cylinder cover [J]. 吉林大学学报(工学版), 2017, 47(2): 540-545.
[9] YIN Yao-bao, YUAN Jia-yang, FU Jun-yong. Characteristics of two-stage relief valve with series damping orifice in the front chamber of pilot valve [J]. 吉林大学学报(工学版), 2017, 47(1): 129-136.
[10] LIN Jun, YANG Yu, HU Xue-yan, WANG Shi-long. Transmitting waveform control technology for transient electromagnetic method based on inductive load [J]. 吉林大学学报(工学版), 2016, 46(5): 1718-1724.
[11] YU Sheng-bao, SU Fa, ZHENG Jian-bo, ZHU Zhan-shan. Design of transient electromagnetic receiving system based on LabVIEW [J]. 吉林大学学报(工学版), 2016, 46(5): 1725-1731.
[12] SHEN Mao-dong, CHENG De-fu, AN Zhan-feng, WANG Yi, ZHAO Jing. Optimization of slanting surfaces of five-sided pyramidal full tensor magnetic gradient probe [J]. 吉林大学学报(工学版), 2016, 46(5): 1732-1738.
[13] LIN Jun, ZHAO Yue, JIANG Chuan-dong, LI Tong, LIU Xiao-nan. Three-dimensional forward modeling with high precision for underground MRS based on Hammer integration [J]. 吉林大学学报(工学版), 2016, 46(2): 609-615.
[14] ZHAO Hong-wei, DONG Xiao-long, ZHANG Lin, HU Xiao-li. Determination of the elastic moduli of bulk materials by four-point bending automatic test [J]. 吉林大学学报(工学版), 2016, 46(1): 140-145.
[15] YU Sheng-bao, SU Fa, HE Jian-long, ZHENG Jian-bo. Design and realization of synchronization system of multifunctional electromagnetic instrument [J]. 吉林大学学报(工学版), 2016, 46(1): 146-152.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!