吉林大学学报(工学版) ›› 2018, Vol. 48 ›› Issue (2): 640-644.doi: 10.13229/j.cnki.jdxbgxb20170592

Previous Articles    

Peripheral oxygen saturation detecting prototype applied in sleep apnea syndrome

WU Jiang, XU Zhuang, LIU Li-jia, JI Yan-ju, LI Su-yi   

  1. College of Electrical Engineering and Instrumentation, Jilin University, Changchun 130061, China
  • Received:2017-02-05 Online:2018-03-01 Published:2018-03-01

Abstract: In this research we designed a prototype of Sleep Apnea Syndrome (SAS) detection device based on the surrounded type pulse oximeter probe. This self-designed device was compared with clinical commercial finger clip type oxygen probe. Furthermore, SAS was preliminary detected and analyzed simulated apnea. The results show that the peripheral oxygen saturation (SpO2) measurement error of this self-designed device is less than ±1%, which meets the requirements of sleep monitoring, thus, can provide reliable data sources for SAS automatic detection model. This device provides a new choice fro SAS screening.

Key words: technology of instrument and meter, sleep apnea syndrome(SAS), pulse oxygen saturation monitoring, pulse rate variability, surrounded type oximeter probe

CLC Number: 

  • TH789
[1] Partinen M.Epidemiology of sleep disorders[J].Handb Clin Neurol, 2011, 98: 275-314.
[2] Epstein L J,Kristo D,Strollo P J, et al.Clinical guideline for the evaluation, management and long-term care of obstructive sleep apnea in adults[J].Clin Sleep Med, 2009, 5(3): 263-276.
[3] Ramar K,Dort L C, Katz S G, et al.Clinical practice guideline for the treatment of obstructive sleep apnea and snoring with oral appliance therapy: an update for 2015[J].Clin Sleep Med, 2015, 11(7): 773-827.
[4] de Chazal P, Heneghan C,Sheridan E, et al.Automated processing of the single-lead electrocardiogram for the detection of obstructive sleep apnea[J].IEEE Trans Biomed Eng,2003,50(6):686-696.
[5] Ravelo-García A G, Saavedra-Santana P, Juliá-SerdáG, et al.Symbolic dynamics marker of heart rate variability combined with clinicalvariables enhance obstructive sleep apnea screening[J].Chaos, 2014, 24(2) :024404.
[6] Penzel T, McNames J, de Chazal P, et al.Systematic comparison of different algorithms for apnoeadetectionbased on ECG recordings[J].Medical & Biological Engineering & Computing , 2002 , 40 (4) :402-407.
[7] Zywietz C W,Von E V,Widiger B, et al.ECG analysis for sleep apnea detection[J].Methods of Information in Medicine, 2004, 43(1):56-59.
[8] Bulte C S E, Keet S W M, Boer C, et al.Level of agreement between heart rate variability and pulse rate variability in healthy individuals[J].European Journal of Anaesthesiology, 2011,28(1):34-38.
[9] Marcos J V, Hornero R, Nabney I T, et al.Analysis of nocturnal oxygen saturation recordings using kernel entropy to assist in sleep apnea-hypopnea diagnosis[C]∥International Conference of IEEE Enginearing in Medicine and Biology Society,IEEE,2011:1745-1748.
[10] Beer A.Determination of the absorption of red light in colored liquids[J].Ann Phys Chem, 1852, 86: 78-88.
[11] Soltanzadeh R, Moussavi Z.Design an oral photoplethysmogram for deriving peripheral oxygen saturation (SpO 2 ) level[J].Journal of Medical Devices, 2015 (9):020922-1-2.
[12] 徐壮.基于脉搏与血氧信号的SAS检测装置研究与开发[D].长春:吉林大学仪器科学与电气工程学院,2017.
Xu Zhuang.Study and development of sleep apnea syndrome detection equipment based on pulse and oxygen saturation [D].Changchun: College of Instrumentation& Electrical Engineering, Jilin University, 2017.
[13] van Eyck A, Lambrechts C, Vanheeswijck L, et al.The role of nocturnal pulse oximetry in the screening for obstructive sleep apnea in obese children and adolescents[J].Sleep Med, 2015, 16(11): 1409-1412.
[14] Mehta V, Vasu T S, Pjillips B, et al.Obstructive sleep apnea and oxygen therapy; a systemical review of the literature and meta analysis[J].J Clin Sleep Med, 2013, 9(3): 271-279.
[1] QIU Yan-kai, LI Bao-ren, YANG Gang, CAO Bo, LIU Zhen. Characteristics and mechanism reducing pressure ripple of hydraulic system with novel hydraulic muffler [J]. 吉林大学学报(工学版), 2018, 48(4): 1085-1091.
[2] YANG Cheng, SONG Ping, PENG Wen-jia, JIN Hao-long, PAN Zhi-qiang. Design of armored vehicle integrated test system based on hybrid bus [J]. 吉林大学学报(工学版), 2018, 48(1): 186-198.
[3] YANG Cheng, SONG Ping, PENG Wen-jia, DENG Gao-shou, LIU Xiong-jun. Design of host computer platform for armored vehicle integrated test system [J]. 吉林大学学报(工学版), 2017, 47(6): 1796-1803.
[4] WANG Tian-hao, WANG Zhong-fu, WANG Yu-meng, YANG Kai-yu, GAO Yin-han, MA Xi-lai. Statistic analysis of cable bundle crosstalk based on polynomial chaos expansion [J]. 吉林大学学报(工学版), 2017, 47(5): 1568-1576.
[5] LIU Xiao-wei, LI Hai, WENG Rui, ZHANG Hai-feng, ZHAO Jun. Application of electrostatic torque to improve dynamic characteristics of novel rotational gyroscope [J]. 吉林大学学报(工学版), 2017, 47(3): 850-854.
[6] LIN Jun, ZHAO Yue, JIANG Chuan-dong, WANG Ying-ji. New surface MRS method based on optimized Block inversion [J]. 吉林大学学报(工学版), 2017, 47(2): 530-539.
[7] ZHANG Fei, SHAN Zhong-de, REN Yong-xin, NIE Jun-gang, LIU Feng. Calibration of line array camera for head defect detection system on cylinder cover [J]. 吉林大学学报(工学版), 2017, 47(2): 540-545.
[8] YIN Yao-bao, YUAN Jia-yang, FU Jun-yong. Characteristics of two-stage relief valve with series damping orifice in the front chamber of pilot valve [J]. 吉林大学学报(工学版), 2017, 47(1): 129-136.
[9] LIN Jun, YANG Yu, HU Xue-yan, WANG Shi-long. Transmitting waveform control technology for transient electromagnetic method based on inductive load [J]. 吉林大学学报(工学版), 2016, 46(5): 1718-1724.
[10] YU Sheng-bao, SU Fa, ZHENG Jian-bo, ZHU Zhan-shan. Design of transient electromagnetic receiving system based on LabVIEW [J]. 吉林大学学报(工学版), 2016, 46(5): 1725-1731.
[11] SHEN Mao-dong, CHENG De-fu, AN Zhan-feng, WANG Yi, ZHAO Jing. Optimization of slanting surfaces of five-sided pyramidal full tensor magnetic gradient probe [J]. 吉林大学学报(工学版), 2016, 46(5): 1732-1738.
[12] LIN Jun, ZHAO Yue, JIANG Chuan-dong, LI Tong, LIU Xiao-nan. Three-dimensional forward modeling with high precision for underground MRS based on Hammer integration [J]. 吉林大学学报(工学版), 2016, 46(2): 609-615.
[13] ZHAO Hong-wei, DONG Xiao-long, ZHANG Lin, HU Xiao-li. Determination of the elastic moduli of bulk materials by four-point bending automatic test [J]. 吉林大学学报(工学版), 2016, 46(1): 140-145.
[14] YU Sheng-bao, SU Fa, HE Jian-long, ZHENG Jian-bo. Design and realization of synchronization system of multifunctional electromagnetic instrument [J]. 吉林大学学报(工学版), 2016, 46(1): 146-152.
[15] WANG Jian-peng, QIN Si-cheng, YANG Li-guang, LI Wu. Simulation analysis of heat transfer in the hydraulic system of loader [J]. 吉林大学学报(工学版), 2016, 46(1): 153-158.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] WANG Wen-quan, SHANG Yan-geng, LI Xiu-juan, WANG Chun-sheng, ZHANG Gui-lan. Microstructure and property of laser welded 650 MPa transformation induced plasticity steel sheet[J]. , 2012, 42(05): 1203 -1207 .
[2] HUANG Jian-kang, HE Cui-cui, SHI Yu, FAN Ding. Thermodynamic analysis of Al-Fe intermetallic compounds formed by dissimilar joining of aluminum and galvanized steel[J]. 吉林大学学报(工学版), 2014, 44(4): 1037 -1041 .
[3] XU Tao, LIU Guang-jie, GE Hai-chao, ZHANG Wei, YU Zheng-lei. Modeling heat source of dynamic welding with local coordinate curve path[J]. 吉林大学学报(工学版), 2014, 44(6): 1704 -1709 .
[4] LUO Hai-tao, ZHOU Wei-jia, WANG Hong-guang, WU Jia-feng. Mechanical analysis of friction stir welding robot under typical working conditions[J]. 吉林大学学报(工学版), 2015, 45(3): 884 -891 .
[5] YANG Yue, ZHOU Lei-lei. Effect of micro-arc oxidation treatment on corrosion resistance of aluminum friction stir welding welds[J]. 吉林大学学报(工学版), 2016, 46(2): 511 -515 .
[6] CHU Liang, SUN Cheng-wei, GUO Jian-hua, ZHAO Di, LI Wen-hui. Evaluation method of braking energy recovery based on wheel cylinder pressure[J]. 吉林大学学报(工学版), 2018, 48(2): 349 -354 .
[7] HE Xiang-kun, JI Xue-wu, YANG Kai-ming, WU Jian, LIU Ya-hui. Tire slip control based on integrated-electro-hydraulic braking system[J]. 吉林大学学报(工学版), 2018, 48(2): 364 -372 .
[8] SHI Wen-ku, LIU Guo-zheng, SONG Hai-sheng, CHEN Zhi-yong, ZHANG Bao. Vibration and noise characteristics of electric bus[J]. 吉林大学学报(工学版), 2018, 48(2): 373 -379 .
[9] ZHANG Tian-shi, SONG Dong-jian, GAO Qing, WANG Guo-hua, YAN Zhen-min, SONG Wei. Construction of power battery liquid cooling system for electric vehicle and simulation of its working process[J]. 吉林大学学报(工学版), 2018, 48(2): 387 -397 .
[10] CHEN Ji-qing, DU Tian-ya, LAN Feng-chong. Numerical analysis of human liver biomechanical response to blunt impacts[J]. 吉林大学学报(工学版), 2018, 48(2): 398 -406 .