吉林大学学报(工学版) ›› 2016, Vol. 46 ›› Issue (1): 43-49.doi: 10.13229/j.cnki.jdxbgxb201601007

Previous Articles     Next Articles

Abnormal noise analysis for commercial vehicle cab based on psychoacoustics

GAO Yin-han1, ZHANG Li-tong2, LIANG Jie1, WANG Zhi-bo1, JIANG Wen-jun3   

  1. 1.State Key Laboratory of Automotive Simulation and Control, Jilin University,Changchun 130022,China;
    2.College of Instrument Science and Electrical Engineering, Jilin University, Changchun 130061,China;
    3.R&D Center, FAW Group Corporation, Changchun 130011,China
  • Received:2014-08-20 Online:2016-01-30 Published:2016-01-30

RICH HTML

0   

PDF (PC)

204

Abstract: In this paper three psychoacoustic parameters, loudness, sharpness and roughness, are introduced to evaluate the abnormal noise for commercial vehicle cab. The noise transfer and acoustics distribution characters of the vehicle are investigated and analyzed by means of field measurements and virtual simulation based on subjective evaluation of sound quality and frequency characteristics analysis. Identification of the abnormal cab noise is made to find a control method. The results show that the abnormal noise for commercial vehicle cab occurs at the vehicle speed of 70 km/h. the sound quality of the vehicle cab is mainly affected at the frequency ranges of 22-36 Hz and 56-90 Hz. The main reasons are the higher structure excitation near frequency 25 Hz, and the resonance coupling of the cab structure and cavity at 58 Hz by the exterior vibration and noise transfer characters, respectively. At low frequency, the interior sound pressure distribution is higher in the underside and lower in the middle at the cross-section. The loudness distribution is also higher in the underside, but not lower in the middle at the cross-section at 0-1 Bark.

Key words: vehicle engineering, abnormal noise, sound quality, psychoacoustics parameters, acoustic-structure coupling, noise distribution

CLC Number: 

  • TB53
[1] Winfried K. Sound quality evaluation in the product cycle[J].Acta Acustica United with Acustica, 1997, 83(5): 784-788.
[2] Hussain Schiffbanker. Development and application of an evaluation technique to assess the subjective character of engine noise[C]//SAE Paper,911081.
[3] Hashimoto T. Sound quality approach on vehicle interior and exterior noise-quantification of frequency related attributes and impulsiveness[J].Journal of Acoustical Society of Japan, 2000,21(6):337-340.
[4] 张伟,蒋伟康. 基于心理声学分析的车内异常噪声辨识[J]. 汽车工程, 2003,25(6):603-605.
Zhang Wei, Jiang Wei-kang. Identification of abnormal in-car noise based on psychoacoustics analysis[J]. Automotive Engineering,2003,25(6):603-605.
[5] Ronacher A W. Evaluating vehicle interior noise quality under transient driving condition[C]//SAE Paper, 1999-01-1683.
[6] 庞剑,谌刚,何华. 汽车噪声与振动——理论与应用[M]. 北京:北京理工大学出版社,2006.
[7] Pietila Glenn, Lim Teik C. Intelligent systems approaches to product sound quality evaluations—a review[J]. Applied Acoustics, 2012,73(10):987-1002.
[8] 高印寒,唐荣江,梁杰,等. 汽车声品质的GA-BP神经网络预测与权重分析[J]. 光学精密工程, 2013,21(2): 462-468.
Gao Yin-han, Tang Rong-jiang, Liang Jie,et al. Vehicle sound quality GA-BP neural network prediction and weight analysis[J]. Optics and Precision Engineering, 2013, 21(2): 462-468.
[9] Zwicker E,Fastl H. Psychoacoustics:Facts and Models[M]. 2nd ed. New York:Springer,2007.
[10] René Visser. Virtual transfer path analysis at daimler trucks[C]//SAE Paper, 2009-01-2243.
[11] 马天飞,高刚,王登峰. 基于声固耦合模型的车内低频结构噪声响应分析[J]. 机械工程学报, 2011, 47(15):76-82.
Ma Tian-fei, Gao Gang, Wang Deng-feng.Response analysis of interior structure noise in lower frequency based on structure-acoustic coupling model[J]. Journal of Mechanical Engineering, 2011, 47(15):76-82.
[1] CHANG Cheng,SONG Chuan-xue,ZHANG Ya-ge,SHAO Yu-long,ZHOU Fang. Minimizing inverter capacity of doubly-fed machine driving electric vehicles [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1629-1635.
[2] XI Li-he,ZHANG Xin,SUN Chuan-yang,WANG Ze-xing,JIANG Tao. Adaptive energy management strategy for extended range electric vehicle [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1636-1644.
[3] HE Ren,YANG Liu,HU Dong-hai. Design and analysis of refrigeration system supplied by solar auxiliary power of refrigerator car [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1645-1652.
[4] NA Jing-xin,MU Wen-long,FAN Yi-sa,TAN Wei,YANG Jia-zhou. Effect of hygrothermal aging on steel-aluminum adhesive joints for automotive applications [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1653-1660.
[5] LIU Yu-mei,LIU Li,CAO Xiao-ning,XIONG Ming-ye,ZHUANG Jiao-jiao. Construction on collision avoidance model of bogie dynamic simulation test bench [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1661-1668.
[6] ZHAO Wei-qiang, GAO Ke, WANG Wen-bin. Prevention of instability control of commercial vehicle based on electric-hydraulic coupling steering system [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1305-1312.
[7] SONG Da-feng, WU Xi-tao, ZENG Xiao-hua, YANG Nan-nan, LI Wen-yuan. Life cycle cost analysis of mild hybrid heavy truck based on theoretical fuel consumption model [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1313-1323.
[8] ZHU Jian-feng, ZHANG Jun-yuan, CHEN Xiao-kai, HONG Guang-hui, SONG Zheng-chao, CAO Jie. Design modification for automotive body structure based on seat pull safety performance [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1324-1330.
[9] NA Jing-xin, PU Lei-xin, FAN Yi-sa, SHEN Chuan-liang. Effect of temperature and humidity on the failure strength of Sikaflex-265 aluminum adhesive joints [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1331-1338.
[10] WANG Yan, GAO Qing, WANG Guo-hua, ZHANG Tian-shi, YUAN Meng. Simulation of mixed inner air-flow integrated thermal management with temperature uniformity of Li-ion battery [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1339-1348.
[11] JIN Li-sheng, XIE Xian-yi, GAO Lin-lin, GUO Bai-cang. Distributed electric vehicle stability control based on quadratic programming [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1349-1359.
[12] KUI Hai-lin, BAO Cui-zhu, LI Hong-xue, LI Ming-da. Idling time prediction method based on least square support vector machine [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1360-1365.
[13] WANG De-jun, WEI Wei-li, BAO Ya-xin. Actuator fault diagnosis of ESC system considering crosswind interference [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1548-1555.
[14] HU Man-jiang, LUO Yu-gong, CHEN Long, LI Ke-qiang. Vehicle mass estimation based on longitudinal frequency response characteristics [J]. 吉林大学学报(工学版), 2018, 48(4): 977-983.
[15] LIU Guo-zheng, SHI Wen-ku, Chen Zhi-yong. Finite element analysis of transmission error for hypoid gears considering installation error [J]. 吉林大学学报(工学版), 2018, 48(4): 984-989.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd