吉林大学学报(工学版) ›› 2017, Vol. 47 ›› Issue (4): 1179-1184.doi: 10.13229/j.cnki.jdxbgxb201704024

• Orginal Article • Previous Articles     Next Articles

Development of drag-reduction test system of bionic functional surfaces with internal flow

TIAN Li-mei, WANG Yang-jun, LI Zi-yuan, SHANG Yan-geng   

  1. Key Laboratory of Bionic Engineering,Ministry of Education,Jilin University, Changchun 130022,China
  • Received:2016-09-22 Online:2017-07-20 Published:2017-07-20

RICH HTML

0   

PDF (PC)

140

Abstract:

To study and measure the drag-reduction performance of bionic functional surfaces with internal flow, a testing system based on differential pressure measurement was designed. Considering the characteristics of the internal flow, the test section is replacable to adapt to the flow field wall with different thickness. The data acquisition, processing and control system was designed based on programmable logic controller. The system precision was analyzed and the mean square errors of different flow velocities were calculated. The elastic silicone rubber and elastic thermal conductive bionic surface was tested using this system. The system can provide a high accuracy analysis and test platform for the study of drag-reduction performance of various bionic functional surfaces with internal flow.

Key words: bionic engineering, bionic functional surface, drag-reduction, elastic thermal conductive, test system

CLC Number: 

  • TB17
[1] 陆夕云, 杨基明, 尹协振, 等. 飞行和游动的生物运动力学和仿生技术研究[J]. 中国科学技术大学学报, 2007, 37(10): 1159-1163.
Lu Xi-yun,Yang Ji-ming,Yin Xie-zhen,et al. Some studies on biofluiddynamics of flight and swimming animals and biomimetic technology[J]. Journal of University of Science and Technology of China,2007, 37(10):1159-1163.
[2] Dean B, Bhushan B. Shark-skin surfaces for fluid-drag reduction in turbulent flow: a review[J]. Philosophical Transactions: Mathematical, Physical and Engineering Sciences, 2010, 368(1929): 4775-4806.
[3] Von Gleich A, Pade C, Petschow U, et al. Potentials and Trends in Biomimetics[M].Beilin: Springer Science & Business Media, 2010:33-74.
[4] Kramer M O. Boundary layer stabilization by distributed damping[J]. Journal of the American Society for Naval Engineers, 1960, 72(1): 25-34.
[5] Gad-el-Hak M. Compliant coatings for drag reduction[J]. Progress in Aerospace Sciences, 2002, 38(1): 77-99.
[6] Pätzold A, Peltzer I, Nitsche W, et al. Active compliant wall for skin friction reduction[J]. International Journal of Heat and Fluid Flow, 2013, 44: 87-94.
[7] Gaster M. Is the Dolphin a Red Herring?[M]//Liepmann W H. Turbulence management and relaminarisation. Berlin: Springer, 1988: 285-304.
[8] Colley A J, Thomas P J, Carpenter P W, et al. An experimental study of boundary-layer transition over a rotating, compliant disk[J]. Physics of Fluids, 1999, 11(11): 3340-3352.
[9] 张祯华. 以聚氨酯为基质的柔性仿生减阻材料的制备及其减阻性能研究[D]. 广州:华南理工大学材料科学与工程学院, 2012.
Zhang Zhen-hua. The preparation and the drag-reduction properties of compliant and bionic drag-reduction materials using polyurethane as a matrix[D]. Guangzhou: College of Material Sciences and Engineering,South China University of Technology, 2012.
[10] Semenov B N, Amirov A I, Kulik V M, et al. Experimental studies of compliant coatings for reduction of turbulent friction[J]. Thermophysics and Aeromechanics, 2007, 14(1):133-142.
[11] 商延赓, 金娥, 可庆朋, 等. 仿海豚皮肤结构的功能表面提高离心泵效率[J]. 农业工程学报, 2016, 32(7): 72-78.
Shang Yan-geng, Jin E, Ke Qing-peng, et al. Efficiency improvement of centrifugal pump with function surface imitating dolphin skin structure[J]. Transactions of the Chinese Society of Agricultural Engineering, 2016, 32(7): 72-78.
[12] 陈超, 宫武旗, 刘禛, 等. 湍流边界层流动结构研究用低 R e数水洞试验台的设计及测试[J]. 工程热物理学报, 2010,31(1):52-54.
Chen Chao, Gong Wu-qi, Liu Zhen, et al. Design and test of a recycled water tunnel for investigating turbulence boundary layer flow at low reynolds number[J]. Journal of Engineering Thermophysics, 2010,31(1):52-54.
[13] 李金成, 陈作钢, 代燚. CFD 在风洞循环水槽设计中的应用[J]. 水动力学研究与进展, 2012,27(2): 216-223.
Li Jin-cheng, Chen Zuo-gang, Dai Yi. CFD application in design of wind tunnel-circulating water channel[J]. Chinese Journal of Hydrodymamics, 2012,27(2): 216-223.
[14] 于昌利. 循环水槽系统设计及参数研究[D]. 哈尔滨:哈尔滨工程大学船舶工程学院, 2009.
Yu Chang-li. The system design and parameter study of circulating water channel[D]. Harbin:College of Shipbuilding Engineering,Harbin Engineering University, 2009.
[15] 王靖宇, 胡兴军, 李庆臣, 等. 面包车尾部造型对其气动特性的影响[J]. 吉林大学学报: 工学版, 2011, 41(3): 618-622.
Wang Jing-yu, Hu Xing-jun, Li Qing-chen, et al. Influence of tail-end styling on aerodynamic characteristics of minibus[J]. Journal of Jilin University (Engineering of Technology Edition), 2011, 41(3): 618-622.
[16] 田丽梅, 商震, 胡国梁, 等. 基于形态仿生的轿车升阻特性的数值模拟[J]. 吉林大学学报: 工学版, 2014,44(5): 1283-1289.
Tian Li-mei, Shang Zhen, Hu Guo-liang, et al. Numerical simulation of the lift and drag characteristics of passenger car based on morphological bionics[J]. Journal of Jilin University (Engineering of Technology Edition), 2014,44(5): 1283-1289.
[17] 季曙明. 超疏水表面宏观尺度下流动减阻机理的实验研究[D]. 上海:上海交通大学机械与动力工程学院, 2010.
Ji Shu-ming. Experimental study about the flowdrag reduction on super-hydrophobic surface at themacroscopic level[D]. Shanghai:School of Mechanical Engineering,Shanghai Jiao Tong University, 2010.
[18] Bandyopadhyay P R, Henoch C, Hrubes J D, et al. Experiments on the effects of aging on compliant coating drag reduction[J]. Physics of Fluids 2005, 17(8): 085104.
[19] Tian L, Jin E, Li Z, et al. The fluid control mechanism of bionic structural heterogeneous composite materials and its potential application in enhancing pump efficiency[J]. Advances in Mechanical Engineering, 2015, 7(11): 1393-1396.
[20] 梅浩然. 弹性导热仿生功能表面制备及流体控制机制研究[D]. 长春:吉林大学生物与农业工程学院, 2016.
Mei Hao-ran. Preparation of elastic thermal conductive bionic functional surface and study of fluid control mechanism[D]. Changchun:College of Biological and Agricultural Engineering,Jilin University, 2016.
[1] TIAN Wei-jun, WANG Ji-yue, LI Ming, ZHANG Xing-wang, ZHANG Yong, CONG Qian. Observation of locomotion of water strider towards water strider robot [J]. 吉林大学学报(工学版), 2018, 48(3): 812-820.
[2] BAI De-en, QUAN Qi-quan, LI He, CHEN Ya-wen, DENG Zong-quan. Starting torque test system for harmonic drive based on servo laoding [J]. 吉林大学学报(工学版), 2017, 47(6): 1804-1810.
[3] CHEN Dong-hui, LIU Wei, LYU Jian-hua, CHANG Zhi-yong, WU Ting, MU Hai-feng. Bionic design of corn stubble collector based on surface structure of Patinopecten yessoensis [J]. 吉林大学学报(工学版), 2017, 47(4): 1185-1193.
[4] WANG Ying, LI Jian-qiao, ZHANG Guang-quan, HUANG Han, ZOU Meng. Mechanical characteristics of bionic walking foot in different media [J]. 吉林大学学报(工学版), 2017, 47(2): 546-551.
[5] ZHANG Rui, YANG Ming-ming, LIU Hai-bao, ZENG Gui-yin, PAN Run-duo, LI Jian-qiao. Numerical simulation of sand flow fixation characteristics of plantar surface of ostrich didactyl foot [J]. 吉林大学学报(工学版), 2015, 45(2): 508-515.
[6] TIAN Li-mei, SHANG Zhen, HU Guo-liang, LI Nan. Numerical simulation of the lift and drag characteristics of passenger car based on morphological bionics [J]. 吉林大学学报(工学版), 2014, 44(5): 1283-1289.
[7] ZHANG Rui, ZHANG Si-hua, LIU Fang, LI Jian-qiao. Structure design and performance analysis of bionic desert hiking stick [J]. 吉林大学学报(工学版), 2013, 43(04): 976-982.
[8] CHANG Zhi-yong, CHEN Dong-hui, TONG Jin, TONG Yue-ying, XIE Jun. Human olfactory feature based bionic electronic nose technology for pork freshness detection [J]. 吉林大学学报(工学版), 2012, 42(增刊1): 131-134.
[9] ZHANG Yan, HUANG He, REN Lu-quan. Drag reduction experiment of bionic excvavtor bucket teeth [J]. 吉林大学学报(工学版), 2012, 42(增刊1): 126-130.
[10] SHI Lei, ZHANG Cheng-chun, WANG Jing, WANG Yong-hua,ZHANG Xue-peng, REN Lu-quan. Reduction of aerodynamic noise from NACA0018 airfoil model using bionic methods [J]. 吉林大学学报(工学版), 2011, 41(6): 1664-1668.
[11] GAO Yin-han,FAN Kuan-gang,YANG Kai-yu,WANG Zhao-hong,WU Ding-chao. Automotive pressure switch test system based on neural network [J]. 吉林大学学报(工学版), 2011, 41(03): 706-710.
[12] Guan Xin，Yan Dong，Gao Zhenhai. Vehicle Movement State Test System Based on INS/RTKDGPS [J]. 吉林大学学报(工学版), 2006, 36(01): 14-0019.
[13] HONG Wei, YANG Xiao-ping, XU Yun, SUN Ji-mei . Development of a Constant-Volume Combustion Test System for the Analysis of Combustion Characteristics of Natural-Gas Engine [J]. 吉林大学学报(工学版), 2000, (4): 1-3.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd