吉林大学学报(工学版) ›› 2018, Vol. 48 ›› Issue (3): 720-726.doi: 10.13229/j.cnki.jdxbgxb2017038020171011

• Orginal Article • Previous Articles     Next Articles

Gasoline spray front droplet size characteristics

YU Liu1,2, LIU Zhong-chang1, LIU Jin-shan1, LIU Jiang-wei2, DU Hong-fei2, CHENG Peng1   

  1. 1.State Key Laboratory of Automotive Simulation and Control,Jilin University, Changchun 130022,China;
    2.R&D Center,China FAW Group Co., Ltd., Changchun 130011,China;
  • Received:2017-09-27 Online:2018-05-20 Published:2018-05-20

RICH HTML

0   

PDF (PC)

282

Abstract: In this paper, the effects of injection pressure on the droplet size distribution characteristics in spray front field, spray front and full range droplet size of gasoline direct injection, as well as space distribution characteristics of the droplet size in the spray front field are investigated the using laser diffraction technique. The results indicate that, first, the increase in injection pressure can improve the atomization quality, and promote the droplet size distribution of the spray front field moving to the small diameter direction; second, the spray front droplet size (SMD and Dv90) is bigger than the full range droplet size (SMD and Dv90); third, in the spray front field, the SMD near the near the spray plume axis is bigger than that in the marginal region and the Dv90 near the spray plume axis is smaller than that in the marginal region.

Key words: power mechinery and engineering, vehicle engineering, gasoline engine, spray characteristics, laser diffraction, droplet size, spray front

CLC Number: 

  • TK41
[1] 李向荣,魏镕,孙柏刚,等. 内燃机燃烧科学与技术[M]. 北京:北京航空航天大学出版社,2012.
[2] Kang K K, Cho H S, Baik S K, et al. The fuel spray structure of high pressure direct swirl injector for gasoline injection system[C]∥SAE Paper,2004-01-0541.
[3] Hoffmann G, Befrui B, Berndorfer A, et al. Fuel system pressure increase for enhanced performance of GDI multi-hole injection systems[C]∥SAE Paper,2014-01-1209.
[4] Gomes C A, da Costa R B R, Franco R L, et al. Comparative analysis of atomization microscopic characteristics of gasoline and ethanol in a GDI injector[C]∥SAE Paper,2015-36-0299.
[5] Sharma N, Agarwal A K. An experimental study of microscopic spray characteristics of a GDI injector using phase doppler interferometry[C]∥SAE Paper,2016-28-0006.
[6] Li Tian-yun, Xu Min, Hung David, et al. Understanding the effects of fuel type and injection conditions on spray evaporation using optical diagnostics[C]∥SAE Paper, 2015-01-0926.
[7] Manin J, Jung Y J, Skeen S A, et al. Experimental characterization of DI gasoline injection processes[C]∥SAE Paper,2015-01-1894.
[8] Zhang Gao-ming, Xu Min, Zhang Yu-yin, et al.Macroscopic characterization of flash-boiling multihole sprays using planar laser-induced exciplex fluorescence. Part II: cross-sectional spray structure[J]. Atomization and Sprays,2013,23(3):265-278.
[9] 虞浏,刘忠长,刘江唯,等. 直喷汽油机喷雾粒径特性[J]. 吉林大学学报:工学版,2017,47(5):1482-1488.
Yu Liu, Liu Zhong-chang, Liu Jiang-wei, et al.Gasoline direct injection engine spray droplet characteristics[J]. Journal of Jilin University (Engineering and Technology Edition), 2017,47(5):1482-1488.
[10] 杨嘉林. 车用汽油发动机燃烧系统的开发[M]. 北京:机械工业出版社,2009.
[11] 付磊,宫艳峰,窦慧莉,等. 缸内直喷与气道喷射汽油机燃烧过程可视化研究[J]. 汽车技术,2016(1):29-31.
Fu Lei, Gong Yan-feng, Dou Hui-li, et al.Research on the in-cylinder combustion process of PFI and GDI engine by visualization[J]. Journal of Automobile Technology, 2016(1):29-31.
[12] 张玉银,张高明,许敏. 直喷汽油机燃烧系统开发中的喷雾激光诊断技术[J].汽车安全与节能学报,2011,2(4):294-307.
Zhang Yu-yin, Zhang Gao-ming, Xu Min.Laser diagnostics for spray of spark ignition direct gasoline (SIDI) combustion system[J]. Journal of Automotive Safty and Energy,2011,2(4):294-307.
[13] 何旭,石永浩,刘海,等. 利用LSD技术对高压共轨柴油机喷雾特性SMD的研究[J]. 北京理工大学学报,2016,36(12):1243-1247.
He Xu, Shi Yong-hao, Liu Hai, et al.Spray characteristics SMD of hign-pressure common rail diesel engine based on LSD technique[J]. Journal of Transactions of Beijing Institute of Technology,2016,36(12):1243-1247.
[14] 张齐龙,曹建明,任欢. 喷雾粒径测试方法的比较研究[J]. 内燃机,2014(5):27-30.
Zhang Qi-long, Cao Jian-ming, Ren Huan.Comparative investigation of measuring methods for droplet size in spray[J]. Journal of Internal Combustion Engines,2014(5):27-30.
[15] Dynamic Studio Users Guide Manual[M].DK:Dantec Dynamics A/C, 2012:453-461.
[16] Malvern Spraytec Manual[M]. UK: Malvern Instruments Ltd, 2007.
[17] GB/T 1884-2000 . 原油和液体石油产品密度实验室测定法[S].
[18] GB 265-88.石油产品运动粘度测定法和动力粘度计算法[S].
[19] GB 255-77.石油产品馏程测定法[S].
[20] GB/T 3536-2008.石油产品闪点和燃点的测定——克利夫兰开口杯法[S].
[21] SH/T 0725-2002 石油基绝缘油碳型组成计算法[S].
[22] Hoffmann G, Befrui B, Berndorfer A, et al. Fuel system pressure increase for enhanced performance of GDI multi-hole injection systems[C]∥SAE Paper,2014-01-1209.
[1] CHANG Cheng,SONG Chuan-xue,ZHANG Ya-ge,SHAO Yu-long,ZHOU Fang. Minimizing inverter capacity of doubly-fed machine driving electric vehicles [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1629-1635.
[2] XI Li-he,ZHANG Xin,SUN Chuan-yang,WANG Ze-xing,JIANG Tao. Adaptive energy management strategy for extended range electric vehicle [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1636-1644.
[3] HE Ren,YANG Liu,HU Dong-hai. Design and analysis of refrigeration system supplied by solar auxiliary power of refrigerator car [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1645-1652.
[4] NA Jing-xin,MU Wen-long,FAN Yi-sa,TAN Wei,YANG Jia-zhou. Effect of hygrothermal aging on steel-aluminum adhesive joints for automotive applications [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1653-1660.
[5] LIU Yu-mei,LIU Li,CAO Xiao-ning,XIONG Ming-ye,ZHUANG Jiao-jiao. Construction on collision avoidance model of bogie dynamic simulation test bench [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1661-1668.
[6] ZHAO Wei-qiang, GAO Ke, WANG Wen-bin. Prevention of instability control of commercial vehicle based on electric-hydraulic coupling steering system [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1305-1312.
[7] NA Jing-xin, PU Lei-xin, FAN Yi-sa, SHEN Chuan-liang. Effect of temperature and humidity on the failure strength of Sikaflex-265 aluminum adhesive joints [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1331-1338.
[8] WANG Yan, GAO Qing, WANG Guo-hua, ZHANG Tian-shi, YUAN Meng. Simulation of mixed inner air-flow integrated thermal management with temperature uniformity of Li-ion battery [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1339-1348.
[9] KUI Hai-lin, BAO Cui-zhu, LI Hong-xue, LI Ming-da. Idling time prediction method based on least square support vector machine [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1360-1365.
[10] SONG Da-feng, WU Xi-tao, ZENG Xiao-hua, YANG Nan-nan, LI Wen-yuan. Life cycle cost analysis of mild hybrid heavy truck based on theoretical fuel consumption model [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1313-1323.
[11] ZHU Jian-feng, ZHANG Jun-yuan, CHEN Xiao-kai, HONG Guang-hui, SONG Zheng-chao, CAO Jie. Design modification for automotive body structure based on seat pull safety performance [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1324-1330.
[12] JIN Li-sheng, XIE Xian-yi, GAO Lin-lin, GUO Bai-cang. Distributed electric vehicle stability control based on quadratic programming [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1349-1359.
[13] WANG De-jun, WEI Wei-li, BAO Ya-xin. Actuator fault diagnosis of ESC system considering crosswind interference [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1548-1555.
[14] HU Man-jiang, LUO Yu-gong, CHEN Long, LI Ke-qiang. Vehicle mass estimation based on longitudinal frequency response characteristics [J]. 吉林大学学报(工学版), 2018, 48(4): 977-983.
[15] ZHANG Man, SHI Shu-ming. Analysis of state transition characteristics for typical vehicle driving cycles [J]. 吉林大学学报(工学版), 2018, 48(4): 1008-1015.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] LIU Song-shan, WANG Qing-nian, WANG Wei-hua, LIN Xin. Influence of inertial mass on damping and amplitude-frequency characteristic of regenerative suspension[J]. 吉林大学学报(工学版), 2013, 43(03): 557 -563 .
[2] HU Xing-jun, LI Teng-fei, WANG Jing-yu, YANG Bo, GUO Peng, LIAO Lei. Numerical simulation of the influence of rear-end panels on the wake flow field of a heavy-duty truck[J]. 吉林大学学报(工学版), 2013, 43(03): 595 -601 .
[3] WANG Tong-jian, CHEN Jin-shi, ZHAO Feng, ZHAO Qing-bo, LIU Xin-hui, YUAN Hua-shan. Mechanical-hydraulic co-simulation and experiment of full hydraulic steering systems[J]. 吉林大学学报(工学版), 2013, 43(03): 607 -612 .
[4] ZHANG Chun-qin, JIANG Gui-yan, WU Zheng-yan. Factors influencing motor vehicle travel departure time choice behavior[J]. 吉林大学学报(工学版), 2013, 43(03): 626 -632 .
[5] XIAO Rui, DENG Zong-cai, LAN Ming-zhang, SHEN Chen-liang. Experiment research on proportions of reactive powder concrete without silica fume[J]. 吉林大学学报(工学版), 2013, 43(03): 671 -676 .
[6] CHEN Si-guo, JIANG Xu, WANG Jian, LIU Yan-heng, DENG Wei-wen, DENG Jun-yi. Mashup of vehicular ad-hoc network and universal mobile telecommunications system[J]. 吉林大学学报(工学版), 2013, 43(03): 706 -710 .
[7] MENG Chao, SUN Zhi-xin, LIU San-min. Multiple execution paths for virus based on cloud computing[J]. 吉林大学学报(工学版), 2013, 43(03): 718 -726 .
[8] XIAN Shu, ZHENG Jin, LU Xing, ZHANG Shi-peng. Identification approach of P2P flow based on the content redistribution model[J]. 吉林大学学报(工学版), 2013, 43(03): 727 -733 .
[9] LYU Yuan-zhi, WANG Shi-gang, YU Jue-qiong, WANG Xiao-yu, LI Xue-song. Display characteristics of one-dimensional integral imaging in virtual mode based on lenticular lens array[J]. 吉林大学学报(工学版), 2013, 43(03): 753 -757 .
[10] WANG Dan, LI Yang, NIAN Gui-jun, WANG Ke. An inhomogeneity mask for spatial watermarking[J]. 吉林大学学报(工学版), 2013, 43(03): 771 -775 .
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd