Journal of Jilin University(Engineering and Technology Edition) ›› 2019, Vol. 49 ›› Issue (3): 816-821.doi: 10.13229/j.cnki.jdxbgxb20180263

Previous Articles     Next Articles

Correlation between metal surface morphology and metal⁃plastic direct adhesion strength

Fang⁃wu MA1,2(),Shi⁃xian CHEN1,2,Lu HAN1,2,Hong⁃yu LIANG1,2,Yong⁃feng PU1,2()   

  1. 1. State Key Laboratory of Automotive Simulation and Control, Jilin University, Changchun 130022, China
    2. Qingdao Automotive Research Institute, Jilin University, Qingdao 266043, China
  • Received:2018-03-23 Online:2019-05-01 Published:2019-07-12
  • Contact: Yong?feng PU E-mail:mikema@jlu.edu.cn;puyongfeng@jlu.edu.cn

RICH HTML

 1   

PDF (PC)

179

Abstract:

The correlation between metal surface morphology and metal?plastic direct adhesion strength was studied. First, the oxide film on the metal surface was removed by acid and alkali solution. Then, the metal surface was treated by fiber laser, and the hot pressing connection between metal and plastic was completed by plate vulcanizing machine. Third, the effects of different laser power and different scanning density on the direct bonding strength of metal?plastic were investigated. Finally, the correlation between the surface characteristics of metals and the direct connection strength of metal?plastic direct adhesion was analyzed based on the microstructure morphology and Scanning electron microscope (SEM). The results show that the direct connection strength of metal?plastic increases first and then decreases with the increase in laser power. With the increase in scanning density, the strength of direct connection between metal?plastic increases.

Key words: manufaturing technology and equipment, metal surface morphology, bonding strength of metal?plastic, laser power, scanning density

CLC Number: 

  • TH161

Fig.1

Metal?plastic direct connection process"

Fig.2

Surface micromorphology of aluminum alloy"

Fig.3

Influence of laser power on adhesion strength"

Fig.4

Microscopic schematic of metal surface"

Fig.5

Influence of scanning density on connection strength"

Fig.6

Specimen of metal?plastic direct adhesion"

Fig.7

Fracture failure diagram of metal?plastic direct connection specimen"

Fig.8

Cross section of metal?plastic direct adhesion"

Fig.9

Morphology of polylactic acid residues in aluminum alloy surface"

1 马芳武,陈实现,赵花垒,等 . 强度、刚度与模态约束下的FSC赛车车架轻量化[J]. 湖南大学学报:自然科学版,2018,45(4):18⁃25.
Ma Fang⁃wu , Chen Shi⁃xian , Zhao Hua⁃lei ,et al . Lightweight on frame of FSC with constriants of strength，stiffness and modal[J]. Journal of Hunan University (Natural Sciences),2018,45(4):18⁃25.
2 益小苏,张明,安学锋,等 . 先进航空树脂基复合材料研究与应用进展[J]. 工程塑料应用,2009,37(10):72⁃76.
Yi Xiao⁃su , Zhang Ming , An Xue⁃feng ,et al . Development and application of advanced aeronautical polymer matrix composites[J]. Engineering Plastics Application,2009,37(10):72⁃76.
3 李成,朱红红,铁瑛,等 . 单搭胶/螺栓混合连接结构的应力分布与载荷分配[J]. 吉林大学学报:工学版,2013,43(4):933⁃938.
Li Cheng , Zhu Hong⁃hong ,Tie Ying,et al . Stress distribution and load sharing in single⁃lap bonded/bolted joints[J]. Journal of Jilin University (Engineering and Technology Edition),2013,43(4):933⁃938.
4 Byskov J , Boll J V , Holm A H , et al . Ultra⁃high⁃strength micro⁃mechanical interlocking by injection molding into laser⁃structured surfaces[J]. International Journal of Adhesion & Adhesives,2010,30(6):485⁃488.
5 李熹平,刘傅文,王爽,等 . 金⁃塑微结构注射成型仿真与试验研究[J]. 机械工程学报,2016,52(22):61⁃69.
Li Xi⁃ping , Liu Fu⁃wen , Wang Shuang , et al . Simulation and experiment study of metal⁃polymer composite injected with microstructure[J]. Journal of Mechanical Engineering,2016,52(22):61⁃69.
6 Huang B , Sun L , Li L ,et al . Experimental investigation of the strength of polymer⁃steel direct adhesion (PSDA) joints with micro⁃structures ablated by laser[J]. Journal of Materials Processing Technology,2017,249:407⁃414.
7 Su Y , Rooij M D , Grouve W ,et al . The effect of titanium surface treatment on the interfacial strength of titanium⁃thermoplastic composite joints[J]. International Journal of Adhesion & Adhesives,2017,72:98⁃108.
8 刘傅文,李熹平,宫宁宁,等 . 界面微构对注射成型铝塑复合件性能的影响研究[J]. 机械工程学报,2018,54(12):148⁃155.
Liu Fu⁃wen , Li Xi⁃ping , Gong Ning⁃ning , et al . Effect of interfacial microstructure on properties of aluminum⁃plastic composite[J]. Journal of Mechanical Engineering,2018,54(12):148⁃155.
9 Rauschenberger J , Cenigaonaindia A , Keseberg J ,et al . Laser hybrid joining of plastic and metal components for lightweight components[J]. Proceedings of SPIE—The International Society for Optical Engineering,San Francisco,California,USA,2015:93560B.
10 杜彦丽 . PMH技术成形工艺对粘结强度影响的研究[D]. 上海:上海交通大学材料科学与工程学院,2010.
Du Yan⁃li . Research on the effect of polymer metal hybrid technology process parameters on adhesive strength[D]. Shanghai: School of Materials Science and Engineering,Shanghai Jiaotong University, 2010.
11 Lin H Y , Chang C H , Young W B . Experimental study on the filling of nano structures with infrared mold surface heating[J]. International Polymer Processing Journal of the Polymer Processing Society,2011,26(1):73⁃81.
12 Jiang J , Wang S , Sun B ,et al . Effect of mold temperature on the structures and mechanical properties of micro⁃injection molded polypropylene[J]. Materials & Design,2015,88:245⁃251.
13 Kim S K , Kim D J , Jung J S ,et al . Flow instability of semicrystalline polymer melt during micro⁃injection molding[J]. Journal of Micromechanics & Microengineering,2014,24(8):085015.
14 Yeong⁃Eun Yoo , Tae⁃Hoon Kim , Tae⁃Jin Je , et al . Injection molding of micro patterned PMMA plate[J]. Transactions of Nonferrous Metals Society of China,2011,21(Sup.1):148⁃152.
[1] LI Jun-ye, HU Jing-lei, YANG Zhao-jun, ZHANG Xin-ming, ZHOU Zeng-wei. Effect of the size of discrete phase abrasive particles on the abrasive flow polishing quality of common rail pipe [J]. 吉林大学学报(工学版), 2018, 48(2): 492-499.
[2] QU Xing-tian, YAN Long-wei, SUN Hui-chao, ZHOU Wei, LI Guang-hui. Structure analysis of 3D printer device of reversible working platform [J]. 吉林大学学报(工学版), 2017, 47(5): 1489-1497.
[3] LI Jun-ye, QIAO Ze-min, YANG Zhao-jun, ZHANG Xin-ming. Influence of abrasive concentration on processing quality of abrasive flow in mesoscopic scale [J]. 吉林大学学报(工学版), 2017, 47(3): 837-843.
[4] QU Xing-tian, ZHAO Yong-bing, LIU Hai-zhong, WANG Xin, YANG Xu, CHEN Hang-de. Modeling and experiment of spatial geometric errors of hybrid serial-parallel machine tool [J]. 吉林大学学报(工学版), 2017, 47(1): 137-144.
[5] WANG Jian-jian, FENG Ping-fa, ZHANG Jian-fu, WU Zhi-jun, ZHANG Guo-bin, YAN Pei-long. Modeling of centering accuracy of chuck and its maintaining characteristics and restoration method [J]. 吉林大学学报(工学版), 2016, 46(2): 487-493.
[6] ZHAO Guo-juan, ZHANG Lei, LU Lei, HAN Fei-fei, ZHAO Ji. Modeling and analysis of the volumetric errors of four-axis polishing platform [J]. 吉林大学学报(工学版), 2014, 44(6): 1676-1683.
[7] HU Sheng-hai, GUO Bin, MASONG Ming-hui, XU Peng. Dynamic modeling and simulation of roller chain system in SimMechanics considering complete tooth profile [J]. 吉林大学学报(工学版), 2013, 43(04): 958-963.
[8] WU Dong-yan, LIU Da-xin, XIE Xu-zhou, ZENG Zhi-yong, CHEN Sheng-gen. Multi-functional inertia dynamometer for main shaft brake of large scale wind turbine generator [J]. 吉林大学学报(工学版), 2013, 43(04): 951-957.
[9] SONG Zhan-jie, ZHANG Mei, HE Gai-yun, LIU Pei-pei. Sculptured surface point distribution strategy based on centroidal Voronoi tesssellation [J]. 吉林大学学报(工学版), 2013, 43(01): 34-38.
[10] FANG Bing, ZHANG Lei, QU Xing-tian, ZHAO Ji. Theoretical and experimental research of stiffness of angular contact ball bearing [J]. , 2012, 42(04): 840-844.
[11] LIU Zhi-feng, LIU Guang-bo, CHENG Qiang, XUAN Dong-sheng, CAI Li-gang. Precision modeling and prediction of precise vertical machining center based on theory of multi-body system [J]. 吉林大学学报(工学版), 2012, 42(02): 388-391.
[12] . [J]. 吉林大学学报(工学版), 2007, 37(06): 1336-1340.
[13] Zhang Fu，Zhao Ji，Zhuang Yan . Polishing of optical glass surface by hydrodynamic suspension [J]. 吉林大学学报(工学版), 2007, 37(03): 544-0547.
[14] Lin Jie-qiong，Wang Yi-qiang . Subdivision planning of complex freeform surface
[J]. 吉林大学学报(工学版), 2007, 37(02): 386-0390.
[15] Wang Jiazhong,，Wang Longshan，Li Guofa，Zhou Guihong，Ding Ning. Intelligent prediction and control system of shaft workpiece size in cylinder traverse grinding [J]. 吉林大学学报(工学版), 2006, 36(02): 204-0208.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd