Journal of Jilin University(Engineering and Technology Edition) ›› 2022, Vol. 52 ›› Issue (9): 2147-2155.doi: 10.13229/j.cnki.jdxbgxb20220296

Previous Articles    

Improved mechanical model of gas diffusion layer in proton exchange membrane fuel cell

Yang XIAO(),Jie WANG,Meng-jun LIU,Fa-qing YANG,Tian-yao ZHANG,Wei LAN()   

  1. State Key Laboratory of Automotive Simulation and Control，Jilin University，Changchun 130022，China
  • Received:2022-03-23 Online:2022-09-01 Published:2022-09-13
  • Contact: Wei LAN E-mail:xiaoy2016@jlu.edu.cn;lanwei@jlu.edu.cn

RICH HTML

 2   

PDF (PC)

202

Abstract:

Aiming at the problem that the mechanical properties of the membrane electrode structure of the proton exchange membrane fuel cell are complex, which makes the simulation analysis results in engineering difficult to match the real situation, the complex mechanical behavior of the gas diffusion layer in the membrane electrode structure was described, and then the accuracy of fuel cell mechanics simulations was improved. First, an improved model of the microstructure of the gas diffusion layer was proposed, and the model parameters were determined by means of experiments. Then, the finite element simulation verification was carried out in Abaqus using the UMAT user subroutine. The experimental and simulation results show that the improved mechanical model can better simulate the nonlinear mechanical behavior of the gas diffusion layer, improve the accuracy of fuel cell engineering simulation, and can be applied to the engineering analysis of fuel cell assembly and mechanical life prediction.

Key words: proton exchange membrane fuel cell, gas diffusion layer, mechanical model, compression load, finite element analysis

CLC Number: 

  • U41

Fig.1

Schematic diagram of structural components of proton exchange membrane fuel cell"

Table 1

GDL types and characteristic parameters"

参数类型
HCP030NHCP030PHCP135
厚度/mm0.30±0.010.30±0.010.32±0.01
密度/（g·cm-3）0.780.780.78
气孔率/%757575
气阻/（mm H2O）<12<12>20

PTFE的质量

分数/%

055
CMPL无无有

Fig.2

Schematic diagram of mechanical test"

Fig.3

Compressed data processing of HCP135"

Fig.4

Dumbbell-shaped specimens for tensile test"

Fig.5

Abaqus finite element model"

Table 2

Material properties of BPP and Gasket"

材料种类密度/（kg·m-3）杨氏模量/MPa泊松比
SUS 3047.93×10-9194 0200.3
PMVS1.35×10-93.450.3

Fig.6

Experimental tooling and specimen"

Fig.7

Compression experimental data and fitting curves"

Fig.8

Tensile test data and fitting curve"

Fig.9

Shear test data and fitting curve"

Fig.10

Relationship between pressure and compression in fuel cell simulation model"

Fig.11

Simulation results of comparison between Xiao's model and linear model"

1 叶跃坤, 池滨, 江世杰, 等. 质子交换膜燃料电池膜电极耐久性的提升[J]. 化学进展, 2019, 31(12): 1637-1652.
Ye Yue-kun, Chi Bin, Jiang Shi-jie, et al. Improvement of membrane electrode durability for proton exchange membrane fuel cells [J]. Progress in Chemistry, 2019, 31(12): 1637-1652.
2 汪圣龙, 唐浩林, 潘牧, 等. 膜电极结构对质子交换膜燃料电池性能的影响[J]. 材料导报, 2003, 17(10): 37-40.
Wang Sheng-long, Tang Hao-lin, Pan Mu, et al. Effect of membrane electrode structure on the performance of proton exchange membrane fuel cells[J]. Materials Review, 2003, 17(10): 37-40.
3 Han K, Hong B K, Kim S H, et al. Influence of anisotropic bending stiffness of gas diffusion layers on the degradation behavior of polymer electrolyte membrane fuel cells under freezing conditions[J]. International Journal of Hydrogen Energy, 2010, 35(22): 12317-12328.
4 Cho J, Oh H, Park J, et al. Effect of the micro porous layer design on the dynamic performance of a proton exchange membrane fuel cell[J]. International Journal of Hydrogen Energy, 2014, 39(1): 459-468.
5 Norouzifard V, Bahrami M. Deformation of PEM fuel cell gas diffusion layers under compressive loading: an analytical approach[J]. J Power Sources, 2014, 264: 92-99.
6 Gigos P A, Faydi Y, Meyer Y. Mechanical characterization and analytical modeling of gas diffusion layers under cyclic compression[J]. International Journal of Hydrogen Energy, 2015, 40(17): 5958-5965.
7 Xiao Y, Gao Z H, Gao F, et al. Improved analytical modeling and mechanical characterization of gas diffusion layers under compression load[J]. Energy Science Engineering, 2020, 8(8): 2799-2807.
8 Yoon W, Huang X Y. A multiphysics model of PEM fuel cell incorporating the cell compression effects[J]. Journal of The Electrochemical Society, 2010, 157(5): B680-B690.
9 Bates A, Mukherjee S, Hwang S, et al. Simulation and experimental analysis of the clamping pressure distribution in a PEM fuel cell stack[J]. International Journal of Hydrogen Energy, 2013, 38(15): 6481-6493.
10 Silberstein M N, Boyce M C. Hygro-thermal mechanical behavior of Nafion during constrained swelling[J]. Journal of Power Sources, 2011, 196(7): 3452-3460.
11 Kusoglu A, Karlsson A M, Santare M H, et al. Mechanical response of fuel cell membranes subjected to a hygro-thermal cycle[J]. J Power Sources, 2006, 161(2): 987-996.
12 Lu Z, Kim C, Karlsson A M, et al. Effect of gas diffusion layer modulus and land-groove geometry on membrane stresses in proton exchange membrane fuel cells[J]. Journal of Power Sources, 2011, 196(10): 4646-4654.
13 Hottinen T, Himanen O, Karvonen S, et al. Inhomogeneous compression of PEMFC gas diffusion layer[J]. Journal of Power Sources, 2007, 171(1): 113-121.
14 Nitta I, Hottinen T, Himanen O, et al. Inhomogeneous compression of PEMFC gas diffusion layer[J]. Journal of Power Sources, 2007, 171(1): 26-36.
15 Herr N, Nicod J M, Varnier C. Decision process to manage useful life of multi-stacks fuel cell systems under service constraint[J]. Renewable Energy, 2017, 105:590-600.
16 Khajeh-Hosseini-Dalasm N, Sasabe T, Tokumasu T, et al. Effects of polytetrafluoroethylene treatment and compression on gas diffusion layer microstructure using high-resolution X-ray computed tomography[J]. Journal of Power Sources, 2014, 266: 213-221.
17 Shahraeeni M, Hoorfar M. Pore-network modeling of liquid water flow in gas diffusion layers of proton exchange membrane fuel cells[J]. International Journal of Hydrogen Energy, 2014, 39(20): 10697-10709.
18 Zenyuk I V, Parkinson D Y, Connolly L G, et al. Gas-diffusion-layer structural properties under compression via X-ray tomography[J]. Journal of Power Sources, 2016, 328: 364-376.
19 Straubhaar B, Pauchet J, Prat M. Water transport in gas diffusion layer of a polymer electrolyte fuel cell in the presence of a temperature gradient. Phase change effect[J]. International Journal of Hydrogen Energy, 2015, 40(35): 11668-11675.
20 Yin Y, Wu T T, He P, et al. Numerical simulation of two-phase cross flow in microstructure of gas diffusion layer with variable contact angle[J]. International Journal of Hydrogen Energy, 2014, 39(28): 15772-15785.
21 Vikram A, Chowdhury P R, Phillips R K, et al. Measurement of effective bulk and contact resistance of gas diffusion layer under inhomogeneous compression—Part I: Electrical conductivity[J]. Journal of Power Sources, 2016, 320: 274-285.
22 Roy Chowdhury P, Vikram A, Phillips R K, et al. Measurement of effective bulk and contact resistance of gas diffusion layer under inhomogeneous compression—Part II: Thermal conductivity[J]. Journal of Power Sources, 2016, 320: 222-230.
23 Garcia-Salaberri P A, Vera M, Zaera R. Nonlinear orthotropic model of the inhomogeneous assembly compression of PEM fuel cell gas diffusion layers[J]. International Journal of Hydrogen Energy, 2011, 36(18): 11856-11870.
24 .硫化橡胶或热塑性橡胶拉伸应力应变性能的测定 [S].
[1] Zi-rong YANG,Yan LI,Xue-feng JI,Fang LIU,Dong HAO. Sensitivity analysis of operating parameters for proton exchange membrane fuel cells [J]. Journal of Jilin University(Engineering and Technology Edition), 2022, 52(9): 1971-1981.
[2] Pei ZHANG,Zhi-wei WANG,Chang-qing DU,Fu-wu YAN,Chi-hua LU. Oxygen excess ratio control method of proton exchange membrane fuel cell air system for vehicle [J]. Journal of Jilin University(Engineering and Technology Edition), 2022, 52(9): 1996-2003.
[3] Zhen-ning LIU,Ke JIANG,Tao-tao ZHAO,Wen-xuan FAN,Guo-long LU. Development and experimental of high⁃power proton exchange membrane fuel cell test system [J]. Journal of Jilin University(Engineering and Technology Edition), 2022, 52(9): 2025-2033.
[4] Feng-xiang CHEN,Jun-yu ZHANG,Feng-lai PEI,Ming-tao HOU,Qi-peng LI,Pei-qing LI,Yang-yang WANG,Wei-dong ZHANG. Modeling and selection scheme of proton exchange membrane fuel cell hydrogen supply system [J]. Journal of Jilin University(Engineering and Technology Edition), 2022, 52(9): 1982-1995.
[5] Heng ZHANG,Zhi-gang ZHAN,Ben CHEN,Pang-chieh SUI,Mu PAN. Anisotropic transport properties of gas diffusion layer based on pore⁃scale model [J]. Journal of Jilin University(Engineering and Technology Edition), 2022, 52(9): 2055-2062.
[6] Yao-wang PEI,Feng-xiang CHEN,Zhe HU,Shuang ZHAI,Feng-lai PEI,Wei-dong ZHANG,Jie-ran JIAO. Temperature control of proton exchange membrane fuel cell thermal management system based on adaptive LQR control [J]. Journal of Jilin University(Engineering and Technology Edition), 2022, 52(9): 2014-2024.
[7] Xun-cheng CHI,Zhong-jun HOU,Wei WEI,Zeng-gang XIA,Lin-lin ZHUANG,Rong GUO. Review of model⁃based anode gas concentration estimation techniques of proton exchange membrane fuel cell system [J]. Journal of Jilin University(Engineering and Technology Edition), 2022, 52(9): 1957-1970.
[8] Jian-lin ZUO,En-bo LIU,Zheng-bin JIA,Sheng-hao XU,Jian-lin XIAO. Finite element analysis of bionic prosthesis based on design of medial meniscus structure [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(6): 2319-2324.
[9] Xin-yan WANG,Quan JIANG,Feng LYU,Zheng-yang YI. Rollover stability of zero turning radius lawn mower based on parametric model [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(5): 1908-1918.
[10] Ya-feng GONG,Jia-xiang SONG,Hai-peng BI,Guo-jin TAN,Guo-hai HU,Si-yuan LIN. Static test and finite element analysis of scale model of fabricated box culvert [J]. Journal of Jilin University(Engineering and Technology Edition), 2020, 50(5): 1728-1738.
[11] GU Hai-dong,LUO Chun-hong. Experiment on soil arching effect of pit supporting structure with scattered row piles and soil nail wall [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1712-1724.
[12] LIU Guo-zheng, SHI Wen-ku, Chen Zhi-yong. Finite element analysis of transmission error for hypoid gears considering installation error [J]. 吉林大学学报(工学版), 2018, 48(4): 984-989.
[13] CHEN Dong-hui, LIU Wei, LYU Jian-hua, CHANG Zhi-yong, WU Ting, MU Hai-feng. Bionic design of corn stubble collector based on surface structure of Patinopecten yessoensis [J]. 吉林大学学报(工学版), 2017, 47(4): 1185-1193.
[14] DONG Chao, CHENG Kai, HU Kang-le, HU Wen-qiang. Pitching movement performance of all terrain articulated tracked vehicles [J]. 吉林大学学报(工学版), 2017, 47(3): 827-836.
[15] DONG Chao, CHENG Kai, HU Wen-qiang, OUYANG Bo, WU Bin. Steering performance analysis of articulated tracked vehicle considering soil shear deformation [J]. 吉林大学学报(工学版), 2016, 46(6): 1922-1932.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd