Journal of Jilin University(Engineering and Technology Edition) ›› 2023, Vol. 53 ›› Issue (9): 2499-2507.doi: 10.13229/j.cnki.jdxbgxb.20211265

Previous Articles     Next Articles

Flow characteristics analysis of constant flow control valve based on AMESim

Jia-yi WANG1(),Xin-hui LIU1,Zhan WANG2,Jin-shi CHEN1(),Ya-fang HAN3,Yu-qi WANG1   

  1. 1.School of Mechanical and Aerospace Engineering，Jilin University，Changchun 130022，China
    2.BBK Test Systems Co. ，Ltd. ，Beijing 101102，China
    3.Shanghai Aircraft Design and Research Institute，Shanghai 200232，China
  • Received:2021-11-23 Online:2023-09-01 Published:2023-10-09
  • Contact: Jin-shi CHEN E-mail:jywang13@jlu.edu.cn;spreading@jlu.edu.cn

RICH HTML

 11   

PDF (PC)

693

Abstract:

To study the constant flow mechanism of the constant flow control valve， the influence of flow area and gradient on the characteristics of constant flow control valve are analyzed based on the actual structure of a certain type of valve. Firstly， the mathematical model， the control theoretical model and the transfer function block diagram of the dynamic system are established to quantitatively analyze the influence of these factors. Then the AMESim simulation model is established， and the influence mechanism of these factors on the steady-state and dynamic characteristics of the valve is analyzed. The reliability of the simulation model is verified by the experiment. The results show that there exists negative feedback between stages in the constant flow control valve， which compensates the pressure difference between the two sides of throttle and reduces the flow adjustment deviation. Adjusting the flow area of the pressure compensator can improve the steady-state characteristics of the constant flow control valve. Adjusting the flow area gradient of the pressure compensator can significantly improve the static and dynamic characteristics of the constant flow control valve.

Key words: mechanical design, constant flow control valve, flow area, AMESim, steady-state characteristics, dynamic characteristis

CLC Number: 

  • TH137.5

Fig.1

Structure of constant flow control valve"

Fig.2

Valve sleeve profile structure"

Fig.3

Shape expansion diagram of three axis distribution valve ports"

Fig.4

Structure of constant flow control valve damping"

Fig.5

Dynamic system block diagram"

Fig.6

System test loop"

Table 1

Pressure difference-flow relationship in testing"

压差/MPa流量/（L·min-1）压差/MPa流量/（L·min-1）
1.02.824.02.90
1.52.904.52.92
2.02.915.02.95
2.52.855.52.98
3.02.876.03.00
3.52.89

Table 2

Basic parameters"

参 数数值
阀芯直径/mm3.6
阀套直径/mm5.5
压力补偿器开孔直径/mm1.2×5
节流口直径/mm1.56
弹簧刚度/（N·mm-1）3.43
弹簧预紧力/N6.86
射流角/（°）69
油液密度/（g·cm-3）0.86
流量系数0.69

Fig.7

AMESim simulation model of constant flow control valve"

Fig.8

Valve control form"

Fig.9

Steady state characteristic curve of constant flow control valve"

Fig.10

Flow curve with pressure"

Fig.11

Distribution diagram of three holes"

Fig.12

Distribution diagram of seven holes"

Fig.13

Pressure difference flow curve under different overcurrent area"

Fig.14

Axial equidistant distribution diagram of five-axis"

Fig.15

Equidistant distribution diagram of uniaxial axis"

Fig.16

Simulation model of hole five-axis distribution"

Fig.17

Simulation model of uniaxial distribution"

Fig.18

Area gradient under different pore distribution"

Fig.19

Flow change curve of three kinds of valves under load step input"

Fig.20

Flow variation curve under different load step pressure with the equidistant distribution of the three-axis"

Fig.21

Flow variation curve under different load step pressure with the equidistant distribution of the five-axis"

Fig.22

Flow variation curve under different load step pressure with equidistant distribution of single axis"

1 陈晋市, 王国强, 龚勋, 等. 插装式单向溢流阀特性[J]. 吉林大学学报:工学版,2016,46(2): 467-468.
Chen Jin-shi, Wang Guo-qiang, Gong Xun, et al. Characteristics of cartridge one-way relief valve[J]. Journal of Jilin University (Engineering and Technology Edition), 2016, 46(2): 467-468.
2 Lu Z, Zhang J, Xu B, et al. Deadzone compensation control based on detection of micro flow rate in pilot stage of proportional directional valve[J]. ISA Transactions, 2019, 94: 234-245.
3 Coskun G, Kolcuoglu T, Dogramacı T, et al. Analysis of a priority flow control valve with hydraulic system simulation model[J]. Journal of the Brazilian Society of Mechanical Sciences & Engineering, 2017, 39(5): 1597-1605.
4 Gu F, Jiang J H, Meng D, et al. The modeling and simulation of hydraulic actuated control system of helicopter in volumetric speed control[J]. Applied Mechanics and Materials, 2015, 779: 169-174.
5 Hao Q, Wu W, Liang X, et al. Effects of structure parameters on abnormal opening of pilot-operated relief valve under alternating pressure[J]. IEEE Access, 2019, 7: 33932-33942.
6 Zhang J, Lu Z, Xu B, et al. Investigation on the dynamic characteristics and control accuracy of a novel proportional directional valve with independently controlled pilot stage[J]. ISA Transactions, 2019, 93(3): 218-230.
7 Amirante R, Vescovo G D, Lippolis A. Flow forces analysis of an open center hydraulic directional control valve sliding spool[J]. Energy Conversion and Management, 2006, 47(1): 114-131.
8 Tao X X, Li T, Huang J H, et al. Characteristic analysis of the digital pilotflow control valve[J]. Machine Tool & Hydraulics, 2016, 44(6): 25-29.
9 Okhotnikov I, Noroozi S, Sewell P, et al. Evaluation of steadyflow torques and pressure losses in a rotaryflow control valve by means of computational fluid dynamics[J]. International Journal of Heat and Fluid Flow, 2017, 64(16): 89-102.
10 Xie H B, Liu J B, Yang H Y, et al. Design of pilot-assisted load control valve with load velocity control ability and fast opening feature[J]. Advances in Mechanical Engineering, 2015, 7(11): 1-9.
11 Lisowski E, Filo G, Rajda J. Analysis offlow forces in the initial phase of throttle gap opening in a proportional control valve[J]. Flow Measurement and Instrumentation, 2017, 59: 157-167.
12 Lisowski E, Filo G. Analysis of a proportional control valveflow coefficient with the usage of a CFD method[J]. Flow Measurement and Instrumentation, 2017, 53: 269-278.
13 Zhang J, Lu Z, Xu B, et al. Investigation on the dynamic characteristics and control accuracy of a novel proportional directional valve with independently controlled pilot stage[J]. ISA Transactions, 2019, 93: 218-230.
14 Wen R W, Yue L Y. Characteristics analysis of proportional control valve on vane damp[J]. Applied Mechanics and Materials, 2014, 541-542: 1266-1270.
15 彭刚, 周维科. 一种新型二通调速阀的结构分析与应用[J]. 液压气动与密封, 2011, 31(1): 53-55.
Peng Gang, Zhou Wei-ke. Structure analysis and application of a new two-way speed regulating valve[J]. Hydraulics Pneumatics & Seals, 2011, 31(1): 53-55.
16 王琦, 张江兵, 饶军,等. 恒流量控制阀的数值模拟和优化设计[J]. 液压与气动, 2013(12): 38-41.
Wang Qi, Zhang Jiang-bing, Rao Jun, et al. Numerical simulation and optimization design of constant flow control valve[J]. Chinese Hydraulics & Pneumatics, 2013(12): 38-41.
17 王书翰,杨伟,李晓东,等. 8挡自动变速器系统压力与流量控制阀设计及动态仿真[J]. 西华大学学报:自然科学版, 2020, 39(5): 84-90.
Wang Shu-han, Yang Wei, Li Xiao-dong, et al. Design and dynamic simulation of system pressure valva in FWD 8AT[J]. Journal of Xihua University (Natural Science Edition), 2020, 39(5): 84-90.
18 佘翔. 基于AMESim的汽车发动机冷却系统仿真分析[D]. 西安: 长安大学汽车学院, 2014.
She Xiang. Research of cooling system of automobile engine based on AMESim[D]. Chang' an: School of Automobile, Chang' an University, 2014.
19 罗艳蕾, 李渊, 邱雪, 等. 基于AMESim的挖掘机负荷传感多路阀建模和仿真[J]. 机床与液压, 2012, 40(3): 142-144.
Luo Yan-lei, Li Yuan, Qiu Xue, et al. Modeling and Simulation of hydraulic excavator load-sensing multi-passage valve based on AMESim[J]. Machine Tool & Hydraulics, 2012, 40(3): 142-144.
[1] Ya-bing CHENG,Ze-yu YANG,Yan LI,Li-chi AN,Ze-hui XU,Peng-yu CAO,Lu-xiang CHEN. Vibration and noise characteristics base on timing silent chain system of hybrid electric vehicle [J]. Journal of Jilin University(Engineering and Technology Edition), 2023, 53(9): 2465-2473.
[2] Yan YANG,Yu-qing SHI,Xiao-rong ZHANG,Guan-wei LUO. Dynamic stability analysis of a amplitude⁃limited vibration system with multiple rigid constraints [J]. Journal of Jilin University(Engineering and Technology Edition), 2023, 53(2): 364-375.
[3] Jing DU,Hong-hui ZHAO,Yu-peng WANG,Tian-wei DING,Kai WEI,Kai WANG,Ling-hai HAN. Purge strategy optimization and verification of PEM fuel cell engine based on AMESim simulation model [J]. Journal of Jilin University(Engineering and Technology Edition), 2022, 52(9): 2069-2076.
[4] Yang LIU. Unloading impact simulation and test of luffing jib tower crane [J]. Journal of Jilin University(Engineering and Technology Edition), 2022, 52(6): 1292-1300.
[5] Zhao-hui JIN,Le-qi GU,Wei HONG,Fang-xi XIE,Tian YOU. Analysis on pressure fluctuation of hydraulic variable valve actuation [J]. Journal of Jilin University(Engineering and Technology Edition), 2022, 52(4): 773-780.
[6] Ya-bing CHENG,Lu-xiang CHEN,Ping-yu GE,Ze-yu YANG,Peng-yu CAO. Dynamic simulation analysis and wear failure of dual-phase timing bush chain [J]. Journal of Jilin University(Engineering and Technology Edition), 2022, 52(4): 781-788.
[7] Yang ZHAO,Yang XIAO,Hao SUN,Wen-hao HUO,Song FENG,Yong LIAO. Numerical simulation of micro pitting damage characteristics of lubricated contact gears based on contour integral [J]. Journal of Jilin University(Engineering and Technology Edition), 2022, 52(4): 799-810.
[8] Long ZHANG,Tian-peng XU,Chao-bing WANG,Jian-yu YI,Can-zhuang ZHEN. Gearbox fault diagnosis baed on convolutional gated recurrent network [J]. Journal of Jilin University(Engineering and Technology Edition), 2022, 52(2): 368-376.
[9] Wei ZHENG,Jian-jun SUN,Chen-bo MA,Qiu-ping YU,Yu-yan ZHANG,Tao NIU. Research status and prospect of automobile wheel hub machining fixture [J]. Journal of Jilin University(Engineering and Technology Edition), 2022, 52(1): 25-36.
[10] Xiao-chao TIAN,Hai-gang WANG,Hu WANG,Zhi-cong WANG,Jian ZHAO,Zhi-gang YANG,Yue WU. Design and test of broadband power generation device with cantilever piezoelectric vibrator [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(6): 1953-1958.
[11] Wei CHEN,Yu-long LEI,Xing-zhong LI,Yao FU,Jian-long HU,Li-guo HOU. Calculation of adhesive wear of involute cylindrical spur gear under low⁃speed conditions [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(5): 1628-1634.
[12] Jing HU,Cong LI,Bang-cheng ZHANG,Xiao-li QIAO,Xin-ming ZHANG,Xiao-ping ZHOU. Oil film stiffness and damping of double⁃decker ball bearing in consideration of centrifugal expansion [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(5): 1601-1611.
[13] Zong-wei YAO,Xu-dong GAO,Gang LIU,Qiu-shi BI. Research on working performance of vertical screw stirring mill based on numerical simulations [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(5): 1642-1650.
[14] Xiao-tao LI,Jin-peng REN,Xiao-xu LI,Hang YANG. Mechanism of a linear actuator driven by dual piezoelectric oscillators in inverse mode [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(2): 468-471.
[15] Gong CHENG,Ke XIAO,Jia-xu WANG,Wei PU,Yan-feng HAN. Gear contact stiffness under mixed lubrication status [J]. Journal of Jilin University(Engineering and Technology Edition), 2020, 50(2): 494-503.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] LI Shoutao, LI Yuanchun. Autonomous Mobile Robot Control Algorithm Based on Hierarchical Fuzzy Behaviors in Unknown Environments[J]. 吉林大学学报(工学版), 2005, 35(04): 391 -397 .
[2] Liu Qing-min，Wang Long-shan，Chen Xiang-wei，Li Guo-fa. Ball nut detection by machine vision[J]. 吉林大学学报(工学版), 2006, 36(04): 534 -538 .
[3] Li Hong-ying; Shi Wei-guang;Gan Shu-cai. Electromagnetic properties and microwave absorbing property
of Z type hexaferrite Ba3-xLaxCo2Fe24O41[J]. 吉林大学学报(工学版), 2006, 36(06): 856 -0860 .
[4] Zhang Quan-fa，Li Ming-zhe，Sun Gang，Ge Xin . Comparison between flexible and rigid blank-holding in multi-point forming[J]. 吉林大学学报(工学版), 2007, 37(01): 25 -30 .
[5] Yang Shu-kai, Song Chuan-xue, An Xiao-juan, Cai Zhang-lin . Analyzing effects of suspension bushing elasticity
on vehicle yaw response character with virtual prototype method[J]. 吉林大学学报(工学版), 2007, 37(05): 994 -0999 .
[6] . [J]. 吉林大学学报(工学版), 2007, 37(06): 1284 -1287 .
[7] Che Xiang-jiu，Liu Da-you，Wang Zheng-xuan . Construction of joining surface with G1 continuity for two NURBS surfaces[J]. 吉林大学学报(工学版), 2007, 37(04): 838 -841 .
[8] Liu Han-bing, Jiao Yu-ling, Liang Chun-yu,Qin Wei-jun . Effect of shape function on computing precision in meshless methods[J]. 吉林大学学报(工学版), 2007, 37(03): 715 -0720 .
[9] Li Yue-ying，Liu Yong-bing，Chen Hua . Surface hardening and tribological properties of a cam materials[J]. 吉林大学学报(工学版), 2007, 37(05): 1064 -1068 .
[10] Zhang He-sheng, Zhang Yi, Wen Hui-min, Hu Dong-cheng . Estimation approaches of average link travel time using GPS data[J]. 吉林大学学报(工学版), 2007, 37(03): 533 -0537 .
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd