利用柔性仿生技术减少矿车粘附

doi:教育部优秀青年教师资助计划项目

吉林大学学报(工学版)

• • Previous Articles Next Articles

Coal Adhesion Reduction on Tramcar by Flexible Bionics Technique

CONG Qian¹, CHAI Xiongliang¹, YANG Xiaodong², JIN Jingfu¹

1.Key Laboratory for TerrainMachine Bionics Engineering, Ministry of Education, Jilin University, Changchun ； 2. Jilin Teacher's Institute of Engineering and Technology，Department of Mechanical and Electronic Engineering, Changchun , China

Received:1900-01-01 Revised:1900-01-01 Online:2005-07-01 Published:2005-07-01
Contact: CONG Qian

Abstract

Abstract: In order to solve the adhesion problem of the tramcar, a flexible bionical tramcar was designed by using the flexible bionics technology. The model and on the spot tests were carried out to reduce the adhesion of coal on the tramcar. The relationships between coal moisture content, freezing time and working cycle for the flexible bionical tramcar and the traditional tramcar were studied under wet adhesion and freezing adhesion conditions. The test results showed that the flexible bionical tramcar can reduce significantly coal wet adhesion and freezing adhesion, and its antiadhesion rate can reach up to 95%.

Key words: mine mechanical engineering, freezing adhesion, wet adhesion, tramcar, antiadhesion, bionics, flexible, coal

CLC Number:

TD524

CONG Qian, CHAI Xiongliang, YANG Xiaodong, JIN Jingfu. Coal Adhesion Reduction on Tramcar by Flexible Bionics Technique[J].吉林大学学报(工学版), 2005, 35(04): 437-441.

References

Related Articles 15

[1]	XI Peng,CONG Qian,WANG Qing-bo,GUO Hua-xi. Wear test and anti-friction mechanism analysis of bionic stripe grinding roll [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1787-1792.
[2]	GUO Hao-tian,XU Tao,LIANG Xiao,YU Zheng-lei,LIU Huan,MA Long. Optimization on thermal surface with rib turbulator inspired by turbulence of alopias' gill in simplified gas turbine transition piece [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1793-1798.
[3]	ZHAO Wei-qiang, GAO Ke, WANG Wen-bin. Prevention of instability control of commercial vehicle based on electric-hydraulic coupling steering system [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1305-1312.
[4]	MAO Yu-ze, WANG Li-qin. Influence of squirrel-cage flexible support on the dynamic performance of ball bearing [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1508-1514.
[5]	LI Yin-wu, WU Qing-wen, CHANG Zhi-yong, YANG Cheng. Simulation and optimal design of backhoe hydraulic excavator based on bionic teeth [J]. 吉林大学学报(工学版), 2018, 48(3): 821-827.
[6]	QIAN Zhi-hui, ZHOU Liang, REN Lei, REN Lu-quan. Completely passive walking machine with bionic subtalar joint and matatarsal phalangeal joint [J]. 吉林大学学报(工学版), 2018, 48(1): 205-211.
[7]	HUANG Han, LI Jian-qiao, CHEN Bai-chao, WU Bao-guang, ZOU Meng. Experiment of impact performance of space lander footpad [J]. 吉林大学学报(工学版), 2017, 47(4): 1194-1200.
[8]	ZHANG Tian-shi, SONG Dong-jian, GAO Qing, WANG Guo-hua, ZHOU Meng, YAN Yu-ying. Promotive effect on thermal management of power battery pack with liquid flow and flat tube bank [J]. 吉林大学学报(工学版), 2017, 47(4): 1032-1039.
[9]	LUN Feng-yan, FU Wen-zhi, LI Ming-zhe, YI Zhuo, WANG Xin-tong, CHEN Xue. Forming of flexible rolling of three-dimensional surface based on bended rolls [J]. 吉林大学学报(工学版), 2017, 47(3): 876-883.
[10]	GE Chang-jiang, YE Hui, HU Xing-jun, YU Zheng-lei. Prediction and control of trailing edge noise on owl wings [J]. 吉林大学学报(工学版), 2016, 46(6): 1981-1986.
[11]	PAN Shu-liang, LU Xiao-lin, ZOU Nan. Route planning and coordinated scheduling model for flexible feeder transit service [J]. 吉林大学学报(工学版), 2016, 46(6): 1827-1835.
[12]	LI Meng, SU Yi-nao, SUN You-hong, GAO Ke. High matrix bionic abnormal shape impregnated diamond bit [J]. 吉林大学学报(工学版), 2016, 46(5): 1540-1545.
[13]	LIANG Yun-hong, REN Lu-quan. Preliminary study of habitat and its bionics [J]. 吉林大学学报(工学版), 2016, 46(5): 1746-1756.
[14]	LIANG Yun-hong, REN Lu-quan. Preliminary study of bionics in human life [J]. 吉林大学学报(工学版), 2016, 46(4): 1373-1384.
[15]	QIU Qing-ying, WEI Zhen-kai, GAO Yu, FENG Pei-en, YIN Peng-long. Fatigue analysis method of working devices of hydraulic excavator [J]. 吉林大学学报(工学版), 2016, 46(1): 159-165.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed

Comments

Recommended 0

No Suggested Reading articles found!