[1] Hasan I,Bourauel C,Mundt T,et al.Biomechanics and load resistance of short dental implants:a review of the literature[J].ISRN Dent,2013,2013:1-5.[2] Chun HJ,Cheong SY,Han JH,et al.Evaluation of design parameters of osseo integrated dental implants using finite element analysis[J].J Oral Rehabil,2002,29(6):565-574.[3] 王煜婷,张少锋,董岩,等.All-on-4种植体参数对周围骨应力影响的三维有限元分析[J].实用口腔医学杂志,2014,30(2):193-197.[4] Alberius P,Gordh M,Lindberg L,et al.Influence of surrounding soft tissues on onlay bone graft incorporation[J].Oral SurgOral MedOral PatholOral RadiolEndod,1996,82(1):22-33.[5] Hansson S.A conical implant-abutment interface at the level of the marginal bone improves the distribution of stresses in the supporting bone.An axisymmetric finite element analysis[J].Clin Oral Implants Res,2003,14(3):286-293.[6] Kitamura E,Stegaroiu R,Nomura S,et al.Biomechanical aspects of marginal bone resorption around osseointegrated implants:considerations based on a three-dimensional finite element analysis[J].Clin Oral Implants Res,2004,15(4):401-412.[7] 姜琴,邓锋,王超,等.微种植体舌侧内收上前牙力系三维有限元非线性模型的建立[J].第三军医大学学报,2015,37(16):1652-1656.[8] 李英,鲍萍萍,孙雯,等.下颌第一磨牙种植冠减径后的三维有限元分析[J].现代口腔医学杂志,2015,29(4):205-208.[9] 赵刚,魏佳佳,张晓平,等.两种颌间牵引对下颌骨微种植体及周围影响的三维有限元分析[J].中国组织工程研究,2013,17(24):4444-4450.[10] Hasan I,Heinemann F,Reimann S,et al.Finite element investigation of implant-supported fixed partial prosthesis in the premaxilla in immediately loaded and osseointegrated states[J].Comput Methods Biomech Biomed Engin,2011,14(11):979-985.[11] 马莉莎,唐亮,潘燕环.双端种植固定桥修复前后种植体-骨界面的动力学研究[J].中华口腔医学杂志,2012,47(7):435-438.[12] 蔡留意,林久祥,张月兰,等.个体化舌侧矫治器微种植体支抗滑动法内收上前牙的三维有限元模型的构建[J].中华口腔正畸学杂志,2014,21(1):14-18.[13] Huang HL,Hsu JT,Fuh LJ,et al.Biomechanical simulation of various surface roughnesses and geometric designs on an immediately loaded dental implant[J].Comput Biol Med,2010,40(5):525-532.[14] Bashutski JD,D'Silva NJ,Wang HL.Implant compression necrosis:current understanding and case report[J].J Periodontol,2009,80(4):700-704.[15] Schuller-Götzburg P,Entacher K,Petutschnigg A,et al.Sinus elevation with a cortical bone graft block:a patient-specific three-dimensional finite element study[J].Int J Oral Maxillofac Implants,2011,27(2):359-368.[16] Qian L,Todo M,Matsushita Y,et al.Effects of implant diameter,insertion depth,and loading angle on stress/strain fields in implant/jawbone systems:finite element analysis[J].Int J Oral Maxillofac Implants,2008,24(5):877-886.[17] Clelland NL,Lee JK,Bimbenet OC,et al.A three-dimensional finite element stress analysis of angled abutments for an implant placed in the anterior maxilla[J].J Prosthodont,1995,4(2):95-100.[18] Bougherara H,Rahim E,Shah S,et al.A preliminary biomechanical assessment of a polymer composite hip implant using an infrared thermography technique validated by strain gage measurements[J].J Biomech Eng,2011,133(7):689-698.[19] Motoyoshi M,Inaba M,Ono A,et al.The effect of cortical bone thickness on the stability of orthodontic mini-implants and on the stress distribution in surrounding bone[J].Int J Oral Maxillofac Surg,2009,38(1):13-18. |