熔融沉积制造技术在口腔医学领域中应用的研究进展

doi:10.13481/j.1671-587X.20230233

Abstract

CLC Number:

R783.1

References 50

1	KOVALCIK A， SMILEK J， MACHOVSKY M， et al. Properties and structure of poly（3-hydroxybutyrate-co-4-hydroxybutyrate） filaments for fused deposition modelling［J］. Int J Biol Macromol， 2021， 183： 880-889.
2	CHEN Y W， HANAK B W， YANG T C， et al. Computer-assisted surgery in medical and dental applications［J］. Expert Rev Med Devices， 2021，18（7）： 669-696.
3	XIA D D， YANG F， ZHENG Y F， et al. Research status of biodegradable metals designed for oral and maxillofacial applications： a review［J］. Bioact Mater， 2021， 6（11）： 4186-4208.
4	MEMON A R， WANG E P， HU J L， et al. A review on computer-aided design and manufacturing of patient-specific maxillofacial implants［J］. Expert Rev Med Devices， 2020， 17（4）： 345-356.
5	HA S H， LEE H， CHOI J Y. Correction of midface deficiency in patient with crouzon syndrome by orthognathic surgery and patient specific facial implant： case report［J］. J Craniofac Surg， 2022， 33（2）： e191-e194.
6	SU X， WANG T， GUO S. Applications of 3D printed bone tissue engineering scaffolds in the stem cell field［J］. Regen Ther， 2021， 16： 63-72.
7	MANIA S， BANACH A， TYLINGO R. Review of current research on chitosan as a raw material in three-dimensional printing technology in biomedical applications［J］. Prog Chem Appl Chitin Deriv， 2020， 25： 37-50.
8	MEI K， GEAGAN M， ROSHKOVAN L， et al. Three-dimensional printing of patient-specific lung phantoms for CT imaging： Emulating lung tissue with accurate attenuation profiles and textures［J］. Med Phys， 2022， 49（2）： 825-835.
9	LEONOV D， KODENKO M， LEICHENCO D， et al. Design and validation of a phantom for transcranial ultrasonography［J］. Int J Comput Assist Radiol Surg， 2022， 17（9）： 1579-1588.
10	LEISNER L C， TASAKA A， TREBING C T， et al. Measuring peri-implant bone lesions using low-dose cone-beam computed tomography［J］. J Prosthodont Res， 2022， 66（2）： 326-332.
11	MORBÉE L， CHEN M， VAN DEN BERGHE T，et al. MRI-based synthetic CT of the hip： can it be an alternative to conventional CT in the evaluation of osseous morphology？［J］. Eur Radiol， 2022， 32（5）： 3112-3120.
12	UNKOVSKIY A， SPINTZYK S， AXMANN D， et al. Additive manufacturing： a comparative analysis of dimensional accuracy and skin texture reproduction of auricular prostheses replicas［J］. J Prosthodont， 2019， 28（2）： e460-e468.
13	KAMIO T， SUZUKI M， ASAUMI R， et al. DICOM segmentation and STL creation for 3D printing： a process and software package comparison for osseous anatomy［J］. 3D Print Med， 2020， 6（1）： 17.
14	VYAVAHARE S， KUMAR S， PANGHAL D. Experimental study of surface roughness， dimensional accuracy and time of fabrication of parts produced by fused deposition modelling［J］. Rapid Prototyp J， 2020， 26（9）： 1535-1554.
15	EUM J， KIM Y， UM D J， et al. Solvent-free polycaprolactone dissolving microneedles generated via the thermal melting method for the sustained release of capsaicin［J］. Micromachines （Basel），2021，12（2）： 167.
16	SHUJAAT S， SHAHEEN E， NOVILLO F， et al. Accuracy of cone beam computed tomography-derived casts： a comparative study［J］. J Prosthet Dent， 2021， 125（1）： 95-102.
17	MSALLEM B， SHARMA N， CAO S S， et al. Evaluation of the dimensional accuracy of 3D-printed anatomical mandibular models using FFF， SLA， SLS， MJ， and BJ printing technology［J］. J Clin Med， 2020， 9（3）： 817.
18	GAO S S， LIU R J， XIN H， et al. The surface characteristics， microstructure and mechanical properties of PEEK printed by fused deposition modeling with different raster angles［J］.Polymers （Basel），2021，14（1）： 77.
19	WANG Z L， NOGUEIRA L P， HAUGEN H J， et al. Dual-functional porous and cisplatin-loaded polymethylmethacrylate cement for reconstruction of load-bearing bone defect kills bone tumor cells［J］. Bioact Mater， 2022， 15： 120-130.
20	METLERSKI M， GROCHOLEWICZ K， JAROŃ A， et al. Comparison of presurgical dental models manufactured with two different three-dimensional printing techniques［J］. J Healthc Eng， 2020， 2020： 8893338.
21	JAIN S， FUOCO T， YASSIN M A， et al. Printability and critical insight into polymer properties during direct-extrusion based 3D printing of medical grade polylactide and copolyesters［J］. Biomacromolecules， 2020， 21（2）： 388-396.
22	JAIDEV L R， CHATTERJEE K. Surface functionalization of 3D printed polymer scaffolds to augment stem cell response［J］. Mater Des， 2019， 161： 44-54.
23	YE X L， LI L H， LIN Z F， et al. Integrating 3D-printed PHBV/Calcium sulfate hemihydrate scaffold and chitosan hydrogel for enhanced osteogenic property［J］. Carbohydr Polym， 2018， 202： 106-114.
24	WANG Q Q， JI C C， SUN L S， et al. Cellulose nanofibrils filled poly（lactic acid） biocomposite filament for FDM 3D printing［J］. Molecules， 2020， 25（10）： 2319.
25	SONG Y， WU H， GAO Y， et al. Zinc silicate/nano-hydroxyapatite/collagen scaffolds promote angiogenesis and bone regeneration via the p38 MAPK pathway in activated monocytes［J］. ACS Appl Mater Interfaces， 2020， 12（14）： 16058-16075.
26	GAO X S， WANG H H， ZHANG X， et al. Preparation of amorphous poly（aryl ether nitrile ketone） and its composites with nano hydroxyapatite for 3D artificial bone printing［J］. ACS Appl Bio Mater， 2020， 3（11）： 7930-7940.
27	FAIRAG R， LI L， RAMIREZ-GARCIALUNA J L， et al. A composite lactide-mineral 3D-printed scaffold for bone repair and regeneration［J］. Front Cell Dev Biol， 2021， 9： 654518.
28	ULBRICH L M， BALBINOT G S， BROTTO G L，et al. 3D printing of poly（butylene adipate-co-terephthalate）（PBAT）/niobium containing bioactive glasses （BAGNb） scaffolds： Characterization of composites， in vitro bioactivity， and in vivo bone repair［J］. J Tissue Eng Regen Med， 2022， 16（3）： 267-278.
29	ZHAO S， XIE K， GUO Y， et al. Fabrication and biological activity of 3D-printed polycaprolactone/magnesium porous scaffolds for critical size bone defect repair［J］. ACS Biomater Sci Eng， 2020， 6（9）： 5120-5131.
30	CHEN W T， NICHOLS L， BRINKLEY F， et al. Alkali treatment facilitates functional nano-hydroxyapatite coating of 3D printed polylactic acid scaffolds［J］. Mater Sci Eng C Mater Biol Appl， 2021， 120： 111686.
31	ZHANG Z Z， ZHANG H Z， ZHANG Z Y. 3D printed poly（ε-caprolactone） scaffolds function with simvastatin-loaded poly（lactic-co-glycolic acid） microspheres to repair load-bearing segmental bone defects［J］. Exp Ther Med， 2019， 17（1）： 79-90.
32	POUHAËR M， PICART G， BAYA D， et al. Design of 3D-printed macro-models for undergraduates’ preclinical practice of endodontic access cavities［J］. Eur J Dent Educ， 2022， 26（2）： 347-353.
33	GIACOMINI G O， DOTTO G N， MELLO W M，et al. Three-dimensional printed model for preclinical training in oral radiology［J］. Eur J Dent Educ， 2022.DOI：10.1111/eje.12801 . doi: 10.1111/eje.12801
34	BHADRA D， SHAH N C， ARORA A， et al. Deducing a surgical dilemma using a novel three dimensional printing technique［J］. J Conserv Dent， 2018， 21（5）： 582-585.
35	JABER S T， HAJEER M Y， KHATTAB T Z， et al. Evaluation of the fused deposition modeling and the digital light processing techniques in terms of dimensional accuracy of printing dental models used for the fabrication of clear aligners［J］. Clin Exp Dent Res， 2021， 7（4）： 591-600.
36	MOHD TAHIR N， WAN HASSAN W N， SAUB R. Comparing retainers constructed on conventional stone models and on 3D printed models： a randomized crossover clinical study［J］. Eur J Orthod， 2019， 41（4）： 370-380.
37	WANG X， SU J S. Evaluation of precision of custom edentulous trays fabricated with 3D printing technologies［J］.Int J Prosthodont，2021，34（1）： 109-117.
38	SHILO D， CAPUCHA T， GOLDSTEIN D， et al. Treatment of facial deformities using 3D planning and printing of patient-specific implants［J］. J Vis Exp， 2020，159.DOI：10.3791/60930 . doi: 10.3791/60930
39	ROY CHOWDHURY S K， SHADAMARSHAN RENGASAYEE A， KRISHNAPRABHU R. The application of pre-operative three-dimensional models in the management of mandibular pathology： is it really useful？ an institutional study［J］. J Maxillofac Oral Surg， 2021， 20（1）： 121-131.
40	ATEF M， MOUNIR M. Computer-guided inferior alveolar nerve lateralization with simultaneous implant placement： a preliminary report［J］. J Oral Implantol， 2018， 44（3）： 192-197.
41	SUN Y， DING Q， TANG L， et al. Accuracy of a chairside fused deposition modeling 3D-printed single-tooth surgical template for implant placement： an in vitro comparison with a light cured template［J］. J Craniomaxillofac Surg， 2019， 47（8）： 1216-1221.
42	PIERALLI S， SPIES B C， HROMADNIK V， et al. How accurate is oral implant installation using surgical guides printed from a degradable and steam-sterilized biopolymer？［J］. J Clin Med， 2020， 9（8）： 2322.
43	ROUZÉ L'ALZIT F， CADE R， NAVEAU A， et al. Accuracy of commercial 3D printers for the fabrication of surgical guides in dental implantology［J］. J Dent， 2022， 117： 103909.
44	YOUSEFI F， SHOKRI A， FARHADIAN M， et al. Accuracy of maxillofacial prototypes fabricated by different 3-dimensional printing technologies using multi-slice and cone-beam computed tomography［J］. Imaging Sci Dent， 2021， 51（1）： 41-47.
45	DING L， CHEN X， ZHANG J， et al. Digital fabrication of a maxillary obturator prosthesis by using a 3-dimensionally-printed polyetheretherketone framework［J］. J Prosthet Dent，2023，129（1）：230-233.
46	CHEN X， WANG F， SUN F F， et al. Digital fabrication of an adult speech aid prosthesis by using a 3-dimensionally printed polyetheretherketone framework［J］. J Prosthet Dent， 2022，127（2）： 358-361.
47	WANG C， HUANG W， ZHOU Y， et al. 3D printing of bone tissue engineering scaffolds［J］. Bioact Mater， 2020， 5（1）： 82-91.
48	PARK S A， LEE S J， SEOK J M， et al. Fabrication of 3D printed PCL/PEG polyblend scaffold using rapid prototyping system for bone tissue engineering application［J］. J Bionic Eng， 2018， 15（3）： 435-442.
49	LEE C H， HAJIBANDEH J， SUZUKI T， et al. Three-dimensional printed multiphase scaffolds for regeneration of periodontium complex［J］. Tissue Eng Part A， 2014， 20（7/8）： 1342-1351.
50	CUI M S， PAN H， LI L， et al. Exploration and preparation of patient-specific ciprofloxacin implants drug delivery system via 3D printing technologies［J］. J Pharm Sci， 2021， 110（11）： 3678-3689.

[1]	. Research progress in application of injectable platelet rich fibrin in treatment of oral diseases [J]. Journal of Jilin University(Medicine Edition), 2022, 48(3): 832-838.
[2]	Wentao GENG,Jinfang XIE,Yingli ZHANG,Xia LIU,Shuo YIN. Occurrence and influence factors of microleakage in classⅤcavities filled with three different flowing materials in vitro [J]. Journal of Jilin University(Medicine Edition), 2022, 48(1): 59-64.
[3]	Han WANG,Zilu TIAN,Xuanyan ZHU,Yubin YANG,Song ZHU. Preparation of cinnamaldehyde antibacterial adhesive and evaluation on its antibacterial property [J]. Journal of Jilin University(Medicine Edition), 2021, 47(5): 1116-1123.
[4]	Gaigai YU, Huimin WANG, Zilu TIAN, Yubin YANG, Xuanyan ZHU, Song ZHU. Influence of polyurethane-gel prepolymer on volume shrinkage and its improvement effect on comprehensive properties of traditional resin matrix [J]. Journal of Jilin University(Medicine Edition), 2021, 47(4): 819-825.
[5]	Rui WANG,Meihua LI,Wanlin ZHOU. Preparation and bone-binding properties of 3D printed titanium alloy implants [J]. Journal of Jilin University(Medicine Edition), 2021, 47(1): 82-88.
[6]	Qing SHA,He LI,Hong ZHANG,Boqun CHENG,Ying WANG,Linlin YAN,Xinying ZOU,Zhimin ZHANG. Effects of EDC on immediate and aging micro-tensile bonding strength of dentin [J]. Journal of Jilin University(Medicine Edition), 2021, 47(1): 173-179.
[7]	QIN Jiaojiao, MA Ang, WANG Jing, WU Qingcui, LI Yiran, ZHU Yaping, JIAO Shan, WANG Chengkun. Effects of Er:YAG laser with different powers on bonding strength of leucite glass ceramic and resin bonding surface [J]. Journal of Jilin University(Medicine Edition), 2020, 46(05): 942-947.
[8]	ZHANG Xiaomeng, WANG Huimin, YANG Yubin, ZHU Xuanyan, TIAN Zilu, ZHU Song. Preparation of light-curable polyurethane adhesive and its effect on properties of traditional acrylic resin adhesives [J]. Journal of Jilin University(Medicine Edition), 2020, 46(02): 365-371.
[9]	ZHAO Mengming, ZHANG Xin, WANG Feifei, LI Rui, LIU Dayong, HU Meilin, JIA Zhi. Comparison of marginal closure effects among 4 kinds of resinmaterials in filling simulated Ⅴ-type cavity of permanent malars in vitro [J]. Journal of Jilin University(Medicine Edition), 2020, 46(02): 389-393.
[10]	. Research progress in polymerization shrinkage control method of dental light curing composite resin [J]. Journal of Jilin University(Medicine Edition), 2020, 46(02): 419-424.
[11]	ZHOU Yuanyuan, ZHU Yaping, QIN Jiaojiao, LI Yiran, WU Qingcui, WANG Chengkun, JIAO Shan. Comparison of wear resistance of three kinds of glass ceramics and Wieland Zenostar zircona [J]. Journal of Jilin University(Medicine Edition), 2019, 45(01): 83-87.
[12]	WANG Chunmeng, LI He, ZHANG Zhiying, LI Nannan, ZHAO Cong, HONG Lihua, ZHANG Zhimin. Expression levels of MMP-2 and MMP-9 in dentin of healthy adults under different bonding conditions and their significances [J]. Journal of Jilin University(Medicine Edition), 2018, 44(06): 1179-1184.
[13]	SHI Jinxian, ZHANG Citong, LIU Lu, HUANG Tianyi, YAN Tongtong, SUN Shiqun, WANG Xiaorong. Effects of room curing polymethyl methacrylate with nano-silver on liver tissue and DNA damage of hepatic cells in mice [J]. Journal of Jilin University(Medicine Edition), 2018, 44(05): 962-967.
[14]	LI Baoquan, LIU Luyao, ZHANG Wenwen, LIU Keke, JIANG Ting, BU Wenhuan, LI Bo, SUN Hongchen. Influence of α-Si₃N₄ and SP₁SiO₂ fusing conditions and filler ratios in properities of dental resin composites [J]. Journal of Jilin University(Medicine Edition), 2018, 44(05): 968-973.
[15]	YAN Min, FENG Dan, GAO Ping, WEI Qianqian, JIANG Xue, ZHANG Xiaomeng, ZHU Song. Comparison of water absorption, solubility and monomer release of six kinds of light-curing composite resins [J]. Journal of Jilin University Medicine Edition, 2018, 44(01): 45-51.

Research progress in application of fused deposition modeling technology in stomatology

RichHTML

PDF (PC)

Like

Knowledge

Abstract

Cite this article

share this article

References 50

Related Articles 15

Metrics

Comments

Recommended 0