Journal of Jilin University(Medicine Edition) ›› 2023, Vol. 49 ›› Issue (2): 542-548.doi: 10.13481/j.1671-587X.20230233
• Review • Previous Articles
Received:
2022-05-06
Online:
2023-03-28
Published:
2023-04-24
CLC Number:
1 | KOVALCIK A, SMILEK J, MACHOVSKY M, et al. Properties and structure of poly(3-hydroxybutyrate-co-4-hydroxybutyrate) filaments for fused deposition modelling[J]. Int J Biol Macromol, 2021, 183: 880-889. |
2 | CHEN Y W, HANAK B W, YANG T C, et al. Computer-assisted surgery in medical and dental applications[J]. Expert Rev Med Devices, 2021,18(7): 669-696. |
3 | XIA D D, YANG F, ZHENG Y F, et al. Research status of biodegradable metals designed for oral and maxillofacial applications: a review[J]. Bioact Mater, 2021, 6(11): 4186-4208. |
4 | MEMON A R, WANG E P, HU J L, et al. A review on computer-aided design and manufacturing of patient-specific maxillofacial implants[J]. Expert Rev Med Devices, 2020, 17(4): 345-356. |
5 | HA S H, LEE H, CHOI J Y. Correction of midface deficiency in patient with crouzon syndrome by orthognathic surgery and patient specific facial implant: case report[J]. J Craniofac Surg, 2022, 33(2): e191-e194. |
6 | SU X, WANG T, GUO S. Applications of 3D printed bone tissue engineering scaffolds in the stem cell field[J]. Regen Ther, 2021, 16: 63-72. |
7 | MANIA S, BANACH A, TYLINGO R. Review of current research on chitosan as a raw material in three-dimensional printing technology in biomedical applications[J]. Prog Chem Appl Chitin Deriv, 2020, 25: 37-50. |
8 | MEI K, GEAGAN M, ROSHKOVAN L, et al. Three-dimensional printing of patient-specific lung phantoms for CT imaging: Emulating lung tissue with accurate attenuation profiles and textures[J]. Med Phys, 2022, 49(2): 825-835. |
9 | LEONOV D, KODENKO M, LEICHENCO D, et al. Design and validation of a phantom for transcranial ultrasonography[J]. Int J Comput Assist Radiol Surg, 2022, 17(9): 1579-1588. |
10 | LEISNER L C, TASAKA A, TREBING C T, et al. Measuring peri-implant bone lesions using low-dose cone-beam computed tomography[J]. J Prosthodont Res, 2022, 66(2): 326-332. |
11 | MORBÉE L, CHEN M, VAN DEN BERGHE T,et al. MRI-based synthetic CT of the hip: can it be an alternative to conventional CT in the evaluation of osseous morphology? [J]. Eur Radiol, 2022, 32(5): 3112-3120. |
12 | UNKOVSKIY A, SPINTZYK S, AXMANN D, et al. Additive manufacturing: a comparative analysis of dimensional accuracy and skin texture reproduction of auricular prostheses replicas[J]. J Prosthodont, 2019, 28(2): e460-e468. |
13 | KAMIO T, SUZUKI M, ASAUMI R, et al. DICOM segmentation and STL creation for 3D printing: a process and software package comparison for osseous anatomy[J]. 3D Print Med, 2020, 6(1): 17. |
14 | VYAVAHARE S, KUMAR S, PANGHAL D. Experimental study of surface roughness, dimensional accuracy and time of fabrication of parts produced by fused deposition modelling[J]. Rapid Prototyp J, 2020, 26(9): 1535-1554. |
15 | EUM J, KIM Y, UM D J, et al. Solvent-free polycaprolactone dissolving microneedles generated via the thermal melting method for the sustained release of capsaicin[J]. Micromachines (Basel),2021,12(2): 167. |
16 | SHUJAAT S, SHAHEEN E, NOVILLO F, et al. Accuracy of cone beam computed tomography-derived casts: a comparative study[J]. J Prosthet Dent, 2021, 125(1): 95-102. |
17 | MSALLEM B, SHARMA N, CAO S S, et al. Evaluation of the dimensional accuracy of 3D-printed anatomical mandibular models using FFF, SLA, SLS, MJ, and BJ printing technology[J]. J Clin Med, 2020, 9(3): 817. |
18 | GAO S S, LIU R J, XIN H, et al. The surface characteristics, microstructure and mechanical properties of PEEK printed by fused deposition modeling with different raster angles[J].Polymers (Basel),2021,14(1): 77. |
19 | WANG Z L, NOGUEIRA L P, HAUGEN H J, et al. Dual-functional porous and cisplatin-loaded polymethylmethacrylate cement for reconstruction of load-bearing bone defect kills bone tumor cells[J]. Bioact Mater, 2022, 15: 120-130. |
20 | METLERSKI M, GROCHOLEWICZ K, JAROŃ A, et al. Comparison of presurgical dental models manufactured with two different three-dimensional printing techniques[J]. J Healthc Eng, 2020, 2020: 8893338. |
21 | JAIN S, FUOCO T, YASSIN M A, et al. Printability and critical insight into polymer properties during direct-extrusion based 3D printing of medical grade polylactide and copolyesters[J]. Biomacromolecules, 2020, 21(2): 388-396. |
22 | JAIDEV L R, CHATTERJEE K. Surface functionalization of 3D printed polymer scaffolds to augment stem cell response[J]. Mater Des, 2019, 161: 44-54. |
23 | YE X L, LI L H, LIN Z F, et al. Integrating 3D-printed PHBV/Calcium sulfate hemihydrate scaffold and chitosan hydrogel for enhanced osteogenic property[J]. Carbohydr Polym, 2018, 202: 106-114. |
24 | WANG Q Q, JI C C, SUN L S, et al. Cellulose nanofibrils filled poly(lactic acid) biocomposite filament for FDM 3D printing[J]. Molecules, 2020, 25(10): 2319. |
25 | SONG Y, WU H, GAO Y, et al. Zinc silicate/nano-hydroxyapatite/collagen scaffolds promote angiogenesis and bone regeneration via the p38 MAPK pathway in activated monocytes[J]. ACS Appl Mater Interfaces, 2020, 12(14): 16058-16075. |
26 | GAO X S, WANG H H, ZHANG X, et al. Preparation of amorphous poly(aryl ether nitrile ketone) and its composites with nano hydroxyapatite for 3D artificial bone printing[J]. ACS Appl Bio Mater, 2020, 3(11): 7930-7940. |
27 | FAIRAG R, LI L, RAMIREZ-GARCIALUNA J L, et al. A composite lactide-mineral 3D-printed scaffold for bone repair and regeneration[J]. Front Cell Dev Biol, 2021, 9: 654518. |
28 | ULBRICH L M, BALBINOT G S, BROTTO G L,et al. 3D printing of poly(butylene adipate-co-terephthalate) (PBAT)/niobium containing bioactive glasses (BAGNb) scaffolds: Characterization of composites, in vitro bioactivity, and in vivo bone repair[J]. J Tissue Eng Regen Med, 2022, 16(3): 267-278. |
29 | ZHAO S, XIE K, GUO Y, et al. Fabrication and biological activity of 3D-printed polycaprolactone/magnesium porous scaffolds for critical size bone defect repair[J]. ACS Biomater Sci Eng, 2020, 6(9): 5120-5131. |
30 | CHEN W T, NICHOLS L, BRINKLEY F, et al. Alkali treatment facilitates functional nano-hydroxyapatite coating of 3D printed polylactic acid scaffolds[J]. Mater Sci Eng C Mater Biol Appl, 2021, 120: 111686. |
31 | ZHANG Z Z, ZHANG H Z, ZHANG Z Y. 3D printed poly(ε-caprolactone) scaffolds function with simvastatin-loaded poly(lactic-co-glycolic acid) microspheres to repair load-bearing segmental bone defects[J]. Exp Ther Med, 2019, 17(1): 79-90. |
32 | POUHAËR M, PICART G, BAYA D, et al. Design of 3D-printed macro-models for undergraduates’ preclinical practice of endodontic access cavities[J]. Eur J Dent Educ, 2022, 26(2): 347-353. |
33 |
GIACOMINI G O, DOTTO G N, MELLO W M,et al. Three-dimensional printed model for preclinical training in oral radiology[J]. Eur J Dent Educ, 2022.DOI:10.1111/eje.12801 .
doi: 10.1111/eje.12801 |
34 | BHADRA D, SHAH N C, ARORA A, et al. Deducing a surgical dilemma using a novel three dimensional printing technique[J]. J Conserv Dent, 2018, 21(5): 582-585. |
35 | JABER S T, HAJEER M Y, KHATTAB T Z, et al. Evaluation of the fused deposition modeling and the digital light processing techniques in terms of dimensional accuracy of printing dental models used for the fabrication of clear aligners[J]. Clin Exp Dent Res, 2021, 7(4): 591-600. |
36 | MOHD TAHIR N, WAN HASSAN W N, SAUB R. Comparing retainers constructed on conventional stone models and on 3D printed models: a randomized crossover clinical study[J]. Eur J Orthod, 2019, 41(4): 370-380. |
37 | WANG X, SU J S. Evaluation of precision of custom edentulous trays fabricated with 3D printing technologies[J].Int J Prosthodont,2021,34(1): 109-117. |
38 |
SHILO D, CAPUCHA T, GOLDSTEIN D, et al. Treatment of facial deformities using 3D planning and printing of patient-specific implants[J]. J Vis Exp, 2020,159.DOI:10.3791/60930 .
doi: 10.3791/60930 |
39 | ROY CHOWDHURY S K, SHADAMARSHAN RENGASAYEE A, KRISHNAPRABHU R. The application of pre-operative three-dimensional models in the management of mandibular pathology: is it really useful? an institutional study[J]. J Maxillofac Oral Surg, 2021, 20(1): 121-131. |
40 | ATEF M, MOUNIR M. Computer-guided inferior alveolar nerve lateralization with simultaneous implant placement: a preliminary report[J]. J Oral Implantol, 2018, 44(3): 192-197. |
41 | SUN Y, DING Q, TANG L, et al. Accuracy of a chairside fused deposition modeling 3D-printed single-tooth surgical template for implant placement: an in vitro comparison with a light cured template[J]. J Craniomaxillofac Surg, 2019, 47(8): 1216-1221. |
42 | PIERALLI S, SPIES B C, HROMADNIK V, et al. How accurate is oral implant installation using surgical guides printed from a degradable and steam-sterilized biopolymer? [J]. J Clin Med, 2020, 9(8): 2322. |
43 | ROUZÉ L'ALZIT F, CADE R, NAVEAU A, et al. Accuracy of commercial 3D printers for the fabrication of surgical guides in dental implantology[J]. J Dent, 2022, 117: 103909. |
44 | YOUSEFI F, SHOKRI A, FARHADIAN M, et al. Accuracy of maxillofacial prototypes fabricated by different 3-dimensional printing technologies using multi-slice and cone-beam computed tomography[J]. Imaging Sci Dent, 2021, 51(1): 41-47. |
45 | DING L, CHEN X, ZHANG J, et al. Digital fabrication of a maxillary obturator prosthesis by using a 3-dimensionally-printed polyetheretherketone framework[J]. J Prosthet Dent,2023,129(1):230-233. |
46 | CHEN X, WANG F, SUN F F, et al. Digital fabrication of an adult speech aid prosthesis by using a 3-dimensionally printed polyetheretherketone framework[J]. J Prosthet Dent, 2022,127(2): 358-361. |
47 | WANG C, HUANG W, ZHOU Y, et al. 3D printing of bone tissue engineering scaffolds[J]. Bioact Mater, 2020, 5(1): 82-91. |
48 | PARK S A, LEE S J, SEOK J M, et al. Fabrication of 3D printed PCL/PEG polyblend scaffold using rapid prototyping system for bone tissue engineering application[J]. J Bionic Eng, 2018, 15(3): 435-442. |
49 | LEE C H, HAJIBANDEH J, SUZUKI T, et al. Three-dimensional printed multiphase scaffolds for regeneration of periodontium complex[J]. Tissue Eng Part A, 2014, 20(7/8): 1342-1351. |
50 | CUI M S, PAN H, LI L, et al. Exploration and preparation of patient-specific ciprofloxacin implants drug delivery system via 3D printing technologies[J]. J Pharm Sci, 2021, 110(11): 3678-3689. |
[1] | . Research progress in application of injectable platelet rich fibrin in treatment of oral diseases [J]. Journal of Jilin University(Medicine Edition), 2022, 48(3): 832-838. |
[2] | Wentao GENG,Jinfang XIE,Yingli ZHANG,Xia LIU,Shuo YIN. Occurrence and influence factors of microleakage in classⅤcavities filled with three different flowing materials in vitro [J]. Journal of Jilin University(Medicine Edition), 2022, 48(1): 59-64. |
[3] | Han WANG,Zilu TIAN,Xuanyan ZHU,Yubin YANG,Song ZHU. Preparation of cinnamaldehyde antibacterial adhesive and evaluation on its antibacterial property [J]. Journal of Jilin University(Medicine Edition), 2021, 47(5): 1116-1123. |
[4] | Gaigai YU, Huimin WANG, Zilu TIAN, Yubin YANG, Xuanyan ZHU, Song ZHU. Influence of polyurethane-gel prepolymer on volume shrinkage and its improvement effect on comprehensive properties of traditional resin matrix [J]. Journal of Jilin University(Medicine Edition), 2021, 47(4): 819-825. |
[5] | Rui WANG,Meihua LI,Wanlin ZHOU. Preparation and bone-binding properties of 3D printed titanium alloy implants [J]. Journal of Jilin University(Medicine Edition), 2021, 47(1): 82-88. |
[6] | Qing SHA,He LI,Hong ZHANG,Boqun CHENG,Ying WANG,Linlin YAN,Xinying ZOU,Zhimin ZHANG. Effects of EDC on immediate and aging micro-tensile bonding strength of dentin [J]. Journal of Jilin University(Medicine Edition), 2021, 47(1): 173-179. |
[7] | QIN Jiaojiao, MA Ang, WANG Jing, WU Qingcui, LI Yiran, ZHU Yaping, JIAO Shan, WANG Chengkun. Effects of Er:YAG laser with different powers on bonding strength of leucite glass ceramic and resin bonding surface [J]. Journal of Jilin University(Medicine Edition), 2020, 46(05): 942-947. |
[8] | ZHANG Xiaomeng, WANG Huimin, YANG Yubin, ZHU Xuanyan, TIAN Zilu, ZHU Song. Preparation of light-curable polyurethane adhesive and its effect on properties of traditional acrylic resin adhesives [J]. Journal of Jilin University(Medicine Edition), 2020, 46(02): 365-371. |
[9] | ZHAO Mengming, ZHANG Xin, WANG Feifei, LI Rui, LIU Dayong, HU Meilin, JIA Zhi. Comparison of marginal closure effects among 4 kinds of resinmaterials in filling simulated Ⅴ-type cavity of permanent malars in vitro [J]. Journal of Jilin University(Medicine Edition), 2020, 46(02): 389-393. |
[10] | . Research progress in polymerization shrinkage control method of dental light curing composite resin [J]. Journal of Jilin University(Medicine Edition), 2020, 46(02): 419-424. |
[11] | ZHOU Yuanyuan, ZHU Yaping, QIN Jiaojiao, LI Yiran, WU Qingcui, WANG Chengkun, JIAO Shan. Comparison of wear resistance of three kinds of glass ceramics and Wieland Zenostar zircona [J]. Journal of Jilin University(Medicine Edition), 2019, 45(01): 83-87. |
[12] | WANG Chunmeng, LI He, ZHANG Zhiying, LI Nannan, ZHAO Cong, HONG Lihua, ZHANG Zhimin. Expression levels of MMP-2 and MMP-9 in dentin of healthy adults under different bonding conditions and their significances [J]. Journal of Jilin University(Medicine Edition), 2018, 44(06): 1179-1184. |
[13] | SHI Jinxian, ZHANG Citong, LIU Lu, HUANG Tianyi, YAN Tongtong, SUN Shiqun, WANG Xiaorong. Effects of room curing polymethyl methacrylate with nano-silver on liver tissue and DNA damage of hepatic cells in mice [J]. Journal of Jilin University(Medicine Edition), 2018, 44(05): 962-967. |
[14] | LI Baoquan, LIU Luyao, ZHANG Wenwen, LIU Keke, JIANG Ting, BU Wenhuan, LI Bo, SUN Hongchen. Influence of α-Si3N4 and SP1SiO2 fusing conditions and filler ratios in properities of dental resin composites [J]. Journal of Jilin University(Medicine Edition), 2018, 44(05): 968-973. |
[15] | YAN Min, FENG Dan, GAO Ping, WEI Qianqian, JIANG Xue, ZHANG Xiaomeng, ZHU Song. Comparison of water absorption, solubility and monomer release of six kinds of light-curing composite resins [J]. Journal of Jilin University Medicine Edition, 2018, 44(01): 45-51. |
|