吉林大学学报(工学版) ›› 2022, Vol. 52 ›› Issue (2): 345-352.doi: 10.13229/j.cnki.jdxbgxb20211101

• 车辆工程·机械工程 • 上一篇    

改进失效模式和影响分析方法在加工中心主轴系统风险分析中的应用

杨海吉1,2(),何佳龙1,2,李国发1,2(),王立鼎1,2,王思远3   

  1. 1.吉林大学 数控装备可靠性教育部重点实验室，长春 130022
    2.吉林大学 机械与航空航天工程学院，长春 130022
    3.鞍钢矿业爆破有限公司，辽宁 鞍山 114051
  • 收稿日期:2021-10-23 出版日期:2022-02-01 发布日期:2022-02-17
  • 通讯作者: 李国发 E-mail:15444936@qq.com;ligf@jlu.edu.cn
  • 作者简介:杨海吉（1991-），男，博士研究生.研究方向：数控装备可靠性理论及其全生命周期工程.E-mail：15444936@qq.com
  • 基金资助:
    吉林省科技发展计划项目(YDZJ202101ZYTS132)

Application of improved failure mode and effect analysis method in risk analysis of spindle system of machining center

Hai-ji YANG1,2(),Jia-long HE1,2,Guo-fa LI1,2(),Li-ding WANG1,2,Si-yuan WANG3   

  1. 1.Key Laboratory of CNC Equipment Reliability，Ministry of Education，Jilin University，Changchun 130022，China
    2.College of Mechanical and Aerospace Engineering，Jilin University，Changchun 130022，China
    3.Ansteel Mining Blasting Co. ，Ltd. ，Anshan 114051，China
  • Received:2021-10-23 Online:2022-02-01 Published:2022-02-17
  • Contact: Guo-fa LI E-mail:15444936@qq.com;ligf@jlu.edu.cn

RICH HTML

 0   

PDF (PC)

135

摘要：

针对传统失效模式和影响分析（FMEA）中存在的问题，提出了一种基于区间三角模糊数与灰色关联分析法的改进FMEA方法，并将其应用到加工中心主轴系统的风险分析中。首先，利用区间三角模糊数对失效模式进行评价；其次，利用模糊层次分析法计算风险因子权重值；最后，利用灰色关联分析法对失效模式排序。实例结果表明：FM2（漏油）是风险优先度最高的失效模式。与其他两种方案相比，本文方法能更加合理地对失效模式进行排序。

关键词: 加工中心, 失效模式和影响分析, 模糊层次分析法, 灰色关联分析法

Abstract:

In order to solve the shortcomings of traditional failure mode and effect analysis（FMEA）， an improved FMEA method based on interval triangular fuzzy number and grey correlation analysis method is proposed and applied to the risk analysis of spindle system of machining center. Firstly， interval-triangular fuzzy numbers are used to evaluate the level of failure modes and the relative importance of risk factors. Secondly， the weight of risk factors is calculated by fuzzy AHP. Finally， the failure modes are sorted by GRA method. The example results show that FM2（oil leakage） is the failure mode with the highest risk priority. Compared with the other two schemes， this method can sort the failure modes more effectively and reasonably.

Key words: machining center, failure mode and effects analysis, fuzzy AHP, grey relational analysis

中图分类号: 

  • TG659

图1

区间三角模糊数"

图2

本文方法的流程图"

表1

失效模式的综合评价结果"

失效模式风险因子
OSD
FM1［（4.9，5.15）；5.4；（5.65，5.85）］［（6.3，6.6）；6.8；（7.05，7.25）］［（4.2，4.47）；4.7；（4.95，5.17）］
FM2［（8.02，8.36）；8.65；（8.87，9.09）］［（7.7，7.96）；8.2；（8.45，8.65）］［（6.35，6.59）；6.85；（7.05，7.25）］
FM3［（7.23，7.51）；7.75；（7.95，8.22）］［（7.33，7.6）；7.83；（8.06，8.26）］［（7.33，7.3）；7.9；（8.12，8.32）］
FM4［（7.9，8.22）；8.5；（8.72，8.92）］［（8.02，8.29）；8.55；（8.84，9.04）］［（7.28，7.55）；7.75；（7.97，8.17）］
FM5［（4.75，5.02）；5.25；（5.48，5.72）］［（6.35，6.65）；6.85；（7.1，7.32）］［（5.05，5.29）；5.55；（5.77，5.99）］
FM6［（2.53，2.81）；3.03；（3.28，3.49）］［（6.63，6.91）；7.13；（7.38，7.61）］［（6.8，7.05）；7.3；（7.55，7.75）］
FM7［（4.21，4.47）；4.78；（5.01，5.24）］［（5.43，5.71）；5.93；（6.16，6.41）］［（6.99，7.22）；7.55；（7.75，7.95）］
FM8［（6.95，7.22）；7.45；（7.72，7.92）］［（6.14，6.34）；6.68；（6.88，7.11）］［（6.3，6.57）；6.8；（7.07，7.3）］
FM9［（5.09，5.37）；5.63；（5.83，6.11）］［（4.45，4.75）；4.95；（5.2，5.45）］［（5.4，5.68）；5.9；（6.13，6.4）］
FM10［（4.67，4.92）；5.2；（5.43，5.65）］［（6.5，6.75）；7；（7.22，7.42）］［（3.88，4.16）；4.38；（4.64，4.88）］

表2

归一化决策矩阵"

失效

模式

风险因子
OSD
FM1［（0.539，0.567）；0.594；（0.622，0.644）］［（0.697，0.73）；0.752；（0.779，0.801）］［（0.505，0.537）；0.565；（0.597，0.621）］
FM2［（0.869，0.904）；0.935；（0.959，0.981）］［（0.887，0.917）；0.946；（0.977，1）］［（0.875，0.907）；0.931；（0.957，0.981）］
FM3［（0.795，0.826）；0.853；（0.875，0.904）］［（0.81，0.84）；0.866；（0.892，0.914）］［（0.881，0.913）；0.95；（0.976，1）］
FM4［（0.882，0.919）；0.952；（0.975，1）］［（0.852，0.88）；0.907；（0.935，0.957）］［（0.763，0.791）；0.823；（0.847，0.871）］
FM5［（0.523，0.552）；0.578；（0.603，0.629）］［（0.702，0.736）；0.758；（0.785，0.809）］［（0.607，0.635）；0.667；（0.693，0.719）］
FM6［（0.278，0.309）；0.333；（0.36，0.384）］［（0.733，0.764）；0.788；（0.816，0.842）］［（0.817，0.847）；0.877；（0.907，0.931）］
FM7［（0.463，0.492）；0.525；（0.551，0.576）］［（0.6，0.632）；0.655；（0.681，0.709）］［（0.84，0.868）；0.907；（0.931，0.956）］
FM8［（0.765，0.794）；0.82；（0.849，0.871）］［（0.679，0.701）；0.738；（0.761，0.787）］［（0.757，0.789）；0.817；（0.849，0.877）］
FM9［（0.559，0.59）；0.619；（0.641，0.672）］［（0.492，0.525）；0.548；（0.575，0.603）］［（0.649，0.683）；0.709；（0.737，0.769）］
FM10［（0.514，0.541）；0.572；（0.597，0.622）］［（0.719，0.747）；0.774；（0.798，0.82）］［（0.466，0.499）；0.526；（0.558，0.586）］

图3

失效模式的灰色关联度"

表3

评价结果"

FM1FM2FM3FM4FM5FM6FM7FM8FM9FM10
Ranking91326574108
O0.4630.9510.7611.0000.4520.3320.4180.7060.4800.447
S0.6121.0000.7900.8860.6190.6600.5130.5910.4340.638
D0.4450.9551.0000.7090.5210.8170.8760.7060.5640.422
Γj0.5270.9750.8150.9010.5390.5610.5370.6550.4740.529

表4

两种方案的评价结果"

失效

模式

方案1方案2
RPNjηuRankingcjRanking
FM1［0.24，0.27］0.07670.4396
FM2［0.79，0.86］0.15010.9791
FM3［0.67，0.73］0.13330.8313
FM4［0.67，0.74］0.13420.9142
FM5［0.27，0.31］0.09760.4405
FM6［0.21，0.25］0.061100.33210
FM7［0.29，0.33］0.10350.3398
FM8［0.47，0.52］0.11740.6594
FM9［0.22，0.26］0.06880.3389
FM10［0.22，0.25］0.06290.4317

图4

不同方案的评价结果"

1 Schneider H. Failure mode and effect analysis: FMEA from theory to execution[J]. Technometrics, 1996, 38(1): 80.
2 Yang Z, Guo J, Tian H, et al. Weakness ranking method for subsystems of heavy-duty machine tools based on FMECA information[J]. Chinese Journal of Mechanical Engineering, 2021, 34(1): 1-12.
3 Yang H, Li G, He J, et al. Improved FMEA based on IVF and fuzzy VIKOR method: a case study of workpiece box system of CNC gear milling machine[J]. Quality and Reliability Engineering International, 2021, 37(6): 2478-2498.
4 孟书, 申桂香, 陈炳锟, 等. 基于灰关联的加工中心可用性需求重要度研究[J]. 机械工程学报, 2016, 52(24): 187-193.
Meng Shu, Shen Gui-xiang, Chen Bing-kun, et al. Analysis on requirement importance rating for availability of machining center based on grey relation method[J]. Journal of Mechanical Engineering, 2016, 52(24): 187-93.
5 Li G, Wang Y, He J, et al. Tool wear state recognition based on gradient boosting decision tree and hybrid classification RBM[J]. International Journal of Advanced Manufacturing Technology, 2020, 110(18): 511-522.
6 Liu H, You J, You X, et al. A novel approach for failure mode and effects analysis using combination weighting and fuzzy VIKOR method[J]. Applied Soft Computing, 2015, 28: 579-588.
7 Li G F, Li Y, Chen C H, et al. Advanced FMEA method based on interval 2-tuple linguistic variables and TOPSIS[J]. Quality Engineering, 2020, 32(4): 653-662.
8 Liu H, Liu L, Liu N. Risk evaluation approaches in failure mode and effects analysis: a literature review[J]. Expert Systems with Application, 2013, 40(2): 828-838.
9 陈传海, 杨兆军, 陈菲, 等. 基于模糊数据包络分析的数控机床故障模式分析[J]. 吉林大学学报: 工学版, 2013, 43(6): 1523-1528.
Chen Chuan-hai, Yang Zhao-jun, Chen Fei, et al. Failure mode analysis of computer numerical control machine tools based on fuzzy-DEA[J]. Journal of Jilin University(Engineering and Technology Edition), 2013, 43(6): 1523-1528.
10 Liu H, Liu L, Liu N, et al. Risk evaluation in failure mode and effects analysis with extended VIKOR method under fuzzy environment[J]. Expert Systems With Applications, 2012, 39(17): 12926-12934.
11 Kutlu A C, Ekmekçioğlu M. Fuzzy failure modes and effects analysis by using fuzzy TOPSIS-based fuzzy AHP[J]. Expert Systems With Applications, 2012, 39(1): 61-67.
12 Chang K, Cheng C. Evaluating the risk of failure using the fuzzy OWA and DEMATEL method[J]. Journal of Intelligent Manufacturing, 2011, 22(2): 113-129.
13 Geum Y, Cho Y, Park Y. A systematic approach for diagnosing service failure: service-specific FMEA and grey relational analysis approach[J]. Mathematical and Computer Modelling, 2011, 54(11/12): 3126-3142.
14 Bian T, Zheng H, Yin L, et al. Failure mode and effects analysis based on D numbers and TOPSIS[J]. Quality and Reliability Engineering International, 2018, 34(4): 501-515.
15 Liu H, You J, Fan X, et al. Failure mode and effects analysis using D numbers and grey relational projection method[J]. Expert Systems with Application, 2014, 41(10): 4670-4679.
16 Zadeh L A. Fuzzy sets[J]. Information & Control, 1965, 8(3): 338-353.
17 Zadeh L A. The concept of a linguistic variable and its application to approximate reasoning-I[J]. Information Sciences, 1975, 8(3): 199-249.
18 Zhang S, Liu S, Zhai R. An extended GRA method for MCDM with interval-valued triangular fuzzy assessments and unknown weights[J]. Computers & Industrial Engineering, 2011, 61(4): 1336-1341.
19 Ashtiani B, Haghighirad F, Makui A, et al. Extension of fuzzy TOPSIS method based on interval-valued fuzzy sets[J]. Applied Soft Computing Journal, 2009, 9(2): 457-461.
20 Li Z, Chen L. A novel evidential FMEA method by integrating fuzzy belief structure and grey relational projection method[J]. Engineering Applications of Artificial Intelligence, 2019, 77: 136-147.
21 张吉军. 模糊层次分析法(FAHP)[J]. 模糊系统与数学, 2000, 14(2): 80-88.
Zhang Ji-jun. Fuzzy analytical hierarchy process[J]. Fuzzy Systems and Mathematics, 2000, 14(2): 80-88.
22 方春明, 孔繁森, 隽志才. 基于模糊综合评判与灰色关联分析的汽车工业第三方物流服务商评价指标体系[J]. 吉林大学学报: 工学版, 2009, 39(): 133-137.
Fang Chun-ming, Kong Fan-sen, Zhi-cai Juan. Evaluation index system on 3PL in automotive industry based on fuzzy comprehensive evaluation and grey correlation analysis[J]. Journal of Jilin University(Engineering and Technology Edition), 2009, 39(Sup.1): 133-137.
23 Mokhtarian M N. A note on "extension of fuzzy TOPSIS method based on interval-valued fuzzy sets"[J]. Applied Soft Computing Journal, 2015, 26: 513-514.
24 申桂香, 戚晓艳, 张英芝, 等. 基于等效样本法的系统组件运行可靠性建模[J]. 吉林大学学报: 工学版, 2020, 50(3): 914-919.
Shen Gui-xiang, Qi Xiao-yan, Zhang Ying-zhi, et al. Operational reliability modeling of system components based on equivalent sample method[J]. Journal of Jilin University(Engineering and Technology Edition), 2020, 50(3): 914-919.
25 郑玉彬, 杨斌, 王晓峰, 等. 基于威布尔分布的电主轴加速寿命试验时间设计[J]. 吉林大学学报: 工学版, 2018, 48(3): 767-772.
Zheng Yu-bin, Yang Bin, Wang Xiao-feng, et al. Test time design of motorized spindle accelerated life test based on weibull distribution[J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(3): 767-772.
[1] 申桂香,栾兰,张英芝,牟黎明,梁树斌. 加工中心组件故障传播影响力评估[J]. 吉林大学学报(工学版), 2022, 52(1): 63-69.
[2] 王芳荣, 郭柏苍, 金立生, 高琳琳, 岳欣羽. 次任务驾驶安全评价指标筛选及其权值计算[J]. 吉林大学学报(工学版), 2017, 47(6): 1710-1715.
[3] 杨兆军, 杨川贵, 陈菲, 郝庆波, 郑志同, 王松. 基于PSO算法和SVR模型的加工中心可靠性模型参数估计[J]. 吉林大学学报(工学版), 2015, 45(3): 829-836.
[4] 王晓峰, 申桂香, 张英芝, 谷东伟, 李怀洋, 刘葳. 基于改进危害度和DEMATEL方法的 abc轴进给系统的故障排序[J]. 吉林大学学报(工学版), 2012, 42(01): 122-127.
[5] 王晓峰, 申桂香, 张英芝, 张立敏, 王志琼, 刘葳. 加工中心可靠性与维修性影响度仿真分析[J]. 吉林大学学报(工学版), 2011, 41(增刊1): 160-163.
[6] 王晓峰,申桂香,张英芝,陈炳锟,李怀洋. 基于群体决策和多种赋值方式的加工中心关键部件RPN分析[J]. 吉林大学学报(工学版), 2011, 41(6): 1630-1635.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
版权所有 © 《吉林大学学报(工学版)》编辑部
地址：长春市人民大街5988号　电话：+86-431-85095297　传真：+86-431-85094074　E-mail: xbgxb@jlu.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发