吉林大学学报(工学版)

• • 上一篇    下一篇

结 构 的 行 波 控 制

谭平   

  1. 东南大学 火电机组振动国家工程研究中心, 南京 210096
  • 收稿日期:2005-03-11 修回日期:2005-09-04 出版日期:2006-05-01 发布日期:2006-05-01
  • 通讯作者: 谭平

Traveling wave control for structure

Tan Ping   

  1. National Engineering Research Center of Turbogenerator Vibration, Southeast University, Nanjing 210096, China
  • Received:2005-03-11 Revised:2005-09-04 Online:2006-05-01 Published:2006-05-01
  • Contact: Tan Ping

摘要: 将结构的扰动视为行波的传播过程,通过主动控制波的传播路径,实现对结构扰动的控制。通过行波控制器的作用,扰动能量在上游被抑制或被吸收掉,使下游的能量达到最小。从理论上探讨了基于行波模型的结构梁响应控制方法,在梁及压电陶瓷作动器处采用行波理论模型,导出了上游测量、下游点施加控制的行波主动控制律及相应的具有超越函数形式的控制补偿器表达式。仿真结果表明行波控制能取得相当好的控制效果。

关键词: 电气工程, 行波, 波导, 主动控制器, 结构, 扰动

Abstract: Regarding the structure disturbance as the propagation of a traveling wave, the control of the structure disturbance may be realized by the active control of the propagation paths of the traveling wave. When the disturbance energy upstream is restrained or absorbed by a traveling wave controller, the energy downstream may be minimized. The structure beam response control method based on the traveling wave model was discussed theoretically. The theoretical traveling wave model was applied to a long thin beam with piezocrystal actuators and the traveling wave active control law for the condition of making measurement upstream and performing control downstream was derived and the control compensator formula of the flexural waveguide in the form of transcendental function was deduced. The simulation results show that the suggested traveling wave control is quite effective.

Key words: electrical engineering, traveling wave, waveguide, active controller, structure, disturbance

中图分类号: 

  • TM153
[1] 郭昊添,徐涛,梁逍,于征磊,刘欢,马龙. 仿鲨鳃扰流结构的过渡段换热表面优化设计[J]. 吉林大学学报(工学版), 2018, 48(6): 1793-1798.
[2] 宋军, 石雪飞, 阮欣. 大体积混凝土热学参数识别的优化[J]. 吉林大学学报(工学版), 2018, 48(5): 1418-1425.
[3] 戴岩, 聂少锋, 周天华. 带环梁的方钢管约束钢骨混凝土柱-钢梁节点滞回性能有限元分析[J]. 吉林大学学报(工学版), 2018, 48(5): 1426-1435.
[4] 毛宇泽, 王黎钦. 鼠笼支撑一体化结构对薄壁球轴承承载性能的影响[J]. 吉林大学学报(工学版), 2018, 48(5): 1508-1514.
[5] 寇淑清, 石舟. 裂解连杆接合面三维重构及其强度与刚度[J]. 吉林大学学报(工学版), 2018, 48(5): 1515-1523.
[6] 董飒, 刘大有, 欧阳若川, 朱允刚, 李丽娜. 引入二阶马尔可夫假设的逻辑回归异质性网络分类方法[J]. 吉林大学学报(工学版), 2018, 48(5): 1571-1577.
[7] 余宜诚, 胡亮, 迟令, 初剑峰. 一种改进的适用于多服务器架构的匿名认证协议[J]. 吉林大学学报(工学版), 2018, 48(5): 1586-1592.
[8] 栾鑫, 邓卫, 程琳, 陈新元. 特大城市居民出行方式选择行为的混合Logit模型[J]. 吉林大学学报(工学版), 2018, 48(4): 1029-1036.
[9] 董坚峰, 张玉峰, 戴志强. 改进的基于狄利克雷混合模型的推荐算法[J]. 吉林大学学报(工学版), 2018, 48(2): 596-604.
[10] 张君媛, 纪梦雪, 王楠, 叶威. 汽车正面25%重叠率碰撞车身前端结构设计[J]. 吉林大学学报(工学版), 2018, 48(1): 57-64.
[11] 侯现耀, 陈学武. 基于态度的公交出行信息使用市场细分[J]. 吉林大学学报(工学版), 2018, 48(1): 98-104.
[12] 尼颖升, 孙启鑫, 马晔, 徐栋. 基于拉应力域的波形钢腹板组合梁承载力配筋计算[J]. 吉林大学学报(工学版), 2018, 48(1): 148-158.
[13] 刘念, 徐涛, 徐天爽, 胡贤磊, 刘维海. 基于差厚技术的汽车仪表板管梁轻量化设计[J]. 吉林大学学报(工学版), 2018, 48(1): 199-204.
[14] 胡云峰, 王长勇, 于树友, 孙鹏远, 陈虹. 缸内直喷汽油机共轨系统结构参数优化[J]. 吉林大学学报(工学版), 2018, 48(1): 236-244.
[15] 赵博, 秦贵和, 赵永哲, 杨文迪. 基于半陷门单向函数的公钥密码[J]. 吉林大学学报(工学版), 2018, 48(1): 259-267.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!