吉林大学学报(工学版) ›› 2011, Vol. 41 ›› Issue (03): 602-607.

• 论文 • 上一篇    下一篇

基于转向稳定性的汽车悬架协调优化

刘伟1,史文库1,郭福祥2,沈志宏2,方德广2   

  1. 1.吉林大学 汽车动态模拟国家重点实验室|长春 130022;2.南京依维柯汽车有限公司|南京 210028
  • 收稿日期:2010-04-13 出版日期:2011-05-01 发布日期:2011-05-01
  • 通讯作者: 史文库(1960-),男,教授,博士生导师.研究方向:汽车系统动力学. E-mail:shiwk@jlu.edu.cn
  • 作者简介:刘伟(1984-),男,博士研究生.研究方向:汽车系统动力学与控制.E-mail:jlulw@yahoo.com.cn
  • 基金资助:

    “863”国家高技术研究发展计划项目(2007220101002381)

Coordinated optimal of automotive suspension based on steering stability

LIU Wei1,SHI Wen-ku1,GUO Fu-xiang2,SHEN Zhi-hong2,FANG De-guang2   

  1. 1.State Key Laboratory of Automotive Dynamics and Simulation,Jilin University,Changchun 130022,China;2.Nanjing IVECO Motor Company LTD,Nanjing 210028,China
  • Received:2010-04-13 Online:2011-05-01 Published:2011-05-01

摘要:

基于试验研究建立了某款车用磁流变阻尼器的数学模型。利用多体动力学仿真软件SIMPACK建立了某款乘用客车整车多体动力学模型和虚拟仿真环境。针对半主动悬架系统和转向系统对汽车操纵稳定性的影响,提出了一种PID神经网络协调控制器,并在Matlab环境中定义了半主动悬架协调控制器与整车多体动力学模型的数据交换接口,实现了汽车半主动悬架和转向系统的协调控制。仿真结果表明:PID神经网络协调控制策略可以抑制由悬架传递的振动,调节汽车转向时车身的横摆及侧倾运动,有效地解决了汽车悬架设计中操纵稳定性与行驶平顺性之间的矛盾。

关键词: 车辆工程, 半主动悬架, 转向稳定性, 协调控制, 仿真

Abstract:

A mathematical model was built for an automotive magneto-rheological damper based on the performance test. A multi-body dynamics model and a vistual proving ground were established for a passenger car using the multi-body dynamics simulation software SIMPACK. In view of the impact of the semi-active suspension system(SASS) and the steering system on the vehicle steering stability, a coordinated controller based on the PID neural network was designed, the data exchange interface between the SASS coordinated controller and the vehicle multi-body dynamics model was defined under MATLAB enviornment, and the coordinated control of vehicle SASS and steering system was achieved. The simulation results showed that the corrdinated control stralegy using PID neural network can reduce the vibration transmitted from the suspension system, adjecst the yaw and roll motions of car body at steering condition, mitigate the contradiction between steering stability and ride comfort of the vehicle.

Key words: vehicle engineering, semi-active suspension, steering stability, coordinated control, simulation

中图分类号: 

  • U463.3
[1] 常成,宋传学,张雅歌,邵玉龙,周放. 双馈电机驱动电动汽车变频器容量最小化[J]. 吉林大学学报(工学版), 2018, 48(6): 1629-1635.
[2] 席利贺,张欣,孙传扬,王泽兴,姜涛. 增程式电动汽车自适应能量管理策略[J]. 吉林大学学报(工学版), 2018, 48(6): 1636-1644.
[3] 何仁,杨柳,胡东海. 冷藏运输车太阳能辅助供电制冷系统设计及分析[J]. 吉林大学学报(工学版), 2018, 48(6): 1645-1652.
[4] 那景新,慕文龙,范以撒,谭伟,杨佳宙. 车身钢-铝粘接接头湿热老化性能[J]. 吉林大学学报(工学版), 2018, 48(6): 1653-1660.
[5] 刘玉梅,刘丽,曹晓宁,熊明烨,庄娇娇. 转向架动态模拟试验台避撞模型的构建[J]. 吉林大学学报(工学版), 2018, 48(6): 1661-1668.
[6] 曲大义,杨晶茹,邴其春,王五林,周警春. 基于干线车流排队特性的相位差优化模型[J]. 吉林大学学报(工学版), 2018, 48(6): 1685-1693.
[7] 赵伟强, 高恪, 王文彬. 基于电液耦合转向系统的商用车防失稳控制[J]. 吉林大学学报(工学版), 2018, 48(5): 1305-1312.
[8] 宋大凤, 吴西涛, 曾小华, 杨南南, 李文远. 基于理论油耗模型的轻混重卡全生命周期成本分析[J]. 吉林大学学报(工学版), 2018, 48(5): 1313-1323.
[9] 朱剑峰, 张君媛, 陈潇凯, 洪光辉, 宋正超, 曹杰. 基于座椅拉拽安全性能的车身结构改进设计[J]. 吉林大学学报(工学版), 2018, 48(5): 1324-1330.
[10] 那景新, 浦磊鑫, 范以撒, 沈传亮. 湿热环境对Sikaflex-265铝合金粘接接头失效强度的影响[J]. 吉林大学学报(工学版), 2018, 48(5): 1331-1338.
[11] 王炎, 高青, 王国华, 张天时, 苑盟. 混流集成式电池组热管理温均特性增效仿真[J]. 吉林大学学报(工学版), 2018, 48(5): 1339-1348.
[12] 金立生, 谢宪毅, 高琳琳, 郭柏苍. 基于二次规划的分布式电动汽车稳定性控制[J]. 吉林大学学报(工学版), 2018, 48(5): 1349-1359.
[13] 隗海林, 包翠竹, 李洪雪, 李明达. 基于最小二乘支持向量机的怠速时间预测[J]. 吉林大学学报(工学版), 2018, 48(5): 1360-1365.
[14] 臧鹏飞, 王哲, 孙晨乐, 林炼炼. 直线增程器稳态运行换气过程[J]. 吉林大学学报(工学版), 2018, 48(5): 1455-1465.
[15] 王扬, 王晓梅, 陈泽仁, 于建群. 基于离散元法的玉米籽粒建模[J]. 吉林大学学报(工学版), 2018, 48(5): 1537-1547.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!