›› 2012, Vol. ›› Issue (03): 639-644.
王元清1, 林云2, 张延年2, 石永久1
WANG Yuan-qing1, LIN Yun2, ZHANG Yan-nian2, SHI Yong-jiu1
摘要: 研究了高强度结构钢材低温下的断裂韧性特征。对厚度为14 mm的Q460C建筑钢材进行了裂纹尖端张开位移δm低温下的试验研究,并进行了试件断口电镜微观分析。结果表明-40 ℃下的Q460C三点弯曲试件断口呈明显的脆性断裂机制。Q460C钢材的δm值随温度降低呈下降趋势,与Q235、Q345、Q390钢材低温下的δm值比较,Q460C的值最低,即断裂韧性相对较差。同时,还对试验结果进行了Boltzmann函数拟合分析,得到其韧脆转变温度及变化规律。结果表明:Q460C高强度建筑钢材的低温冷脆特征明显。
中图分类号:
[1] Pocock G. High strength steel use in Australia, Japan and the US[J]. The Structural Engineer, 2006,11:27-30. [2] 施刚, 石永久, 王元清. 运用ANSYS 分析超高强度钢材钢柱整体稳定特性[J]. 吉林大学学报:工学版,2009,39(1):113-118. Shi Gang, Shi Yong-jiu, Wang Yuan-qing. Analysis on overall buckling behaviour of ultra-high strength steel columns by ANSYS [J]. Journal of Jilin University(Engineering and Technology Edition),2009,39(1):113-118. [3] 武延民. 钢结构脆性断裂的力学机理及其工程设计方法研究. 北京: 清华大学, 2004. Wu Yan-min. Research for mechanism of brittle fracture of structural steel and its engineering design method. Beijing: Tsinghua University, 2004. [4] 中华人民共和国国家技术监督局. GB50017-2003钢结构设计规范[S]. 北京: 中国标准出版社, 2003. [5] 中华人民共和国国家技术监督局. GB/T21143-2007金属材料准静态断裂韧度的统一试验方法[S]. 北京: 中国标准出版社, 2007. [6] 中华人民共和国国家技术监督局. GB4161-2007金属材料平面应变断裂韧度K1C试验方法[S]. 北京:中国标准出版社, 2007. [7] 武延民, 王元清, 江见鲸, 等. 低温下结构钢材裂纹尖端张开位移的变化规律[J]. 低温建筑技术,2004(1):1-3. Wu Yan-min, Wang Yuan-qing, Jiang Jian-jing, et al. The study on conditions of brittle fracture under low temperature for structural steels[J]. Low Temperature Architecture Technology,2004(1):1-3. [8] 赵建平, 张秀敏, 沈士明. 材料韧脆转变温度数据处理方法探讨[J]. 石油化工设备, 2004, 33(4):29-32. Zhao Jian-ping, Zhang Xiu-min, Shen Shi-ming. On the method of data processing for ductile-brittle transition temperature[J]. Petro-chemical Equipment,2004,33(4):29-32. [9] Wu Yan-min, Wang Yuan-qing, Shi Yong-jiu, et al. Effects of low temperature on properties of structural steels[J]. Journal of University of Science and Technology Beijing,2004,11(5):442-448. |
[1] | 关庆丰,张福涛,彭韬,吕鹏,李姚君,许亮,丁佐军. 含硼、钴9%Cr耐热钢的热变形行为[J]. 吉林大学学报(工学版), 2018, 48(6): 1799-1805. |
[2] | 关庆丰, 董书恒, 郑欢欢, 李晨, 张从林, 吕鹏. 强流脉冲电子束作用下45#钢表面Cr合金化[J]. 吉林大学学报(工学版), 2018, 48(4): 1161-1168. |
[3] | 赵宇光, 杨雪慧, 徐晓峰, 张阳阳, 宁玉恒. Al-10Sr变质剂状态、变质温度及变质时间对ZL114A合金组织的影响[J]. 吉林大学学报(工学版), 2018, 48(1): 212-220. |
[4] | 汤华国, 马贤锋, 赵伟, 刘建伟, 赵振业. 高性能金属铝的制备、微观结构及其热稳定性[J]. 吉林大学学报(工学版), 2017, 47(5): 1542-1547. |
[5] | 关庆丰, 张远望, 孙潇, 张超仁, 吕鹏, 张从林. 强流脉冲电子束作用下铝钨合金的表面合金化[J]. 吉林大学学报(工学版), 2017, 47(4): 1171-1178. |
[6] | 杨晓红, 杭文先, 秦绍刚, 刘勇兵, 刘利萍. H13钢激光熔覆钴基复合涂层的组织及耐磨性[J]. 吉林大学学报(工学版), 2017, 47(3): 891-899. |
[7] | 关庆丰, 黄尉, 李怀福, 龚晓花, 张从林, 吕鹏. 强流脉冲电子束诱发的Cu-C扩散合金化[J]. 吉林大学学报(工学版), 2016, 46(6): 1967-1973. |
[8] | 张学广, 刘纯国, 郑愿, 江仲海, 李湘吉. 基于延性损伤和剪切损伤的铝合金成形极限预测[J]. 吉林大学学报(工学版), 2016, 46(5): 1558-1566. |
[9] | 刘晓波, 周德坤, 赵宇光. 不同等温热处理条件下半固态挤压Mg2Si/Al复合材料的组织和性能[J]. 吉林大学学报(工学版), 2016, 46(5): 1577-1582. |
[10] | 李春玲, 樊丁, 王斌, 余淑荣. 5A06铝合金/镀锌钢预置涂粉对接激光熔钎焊组织与性能[J]. 吉林大学学报(工学版), 2016, 46(2): 516-521. |
[11] | 张家陶, 赵宇光, 谭娟. 初始组织对电脉冲处理逆变奥氏体晶粒细化效果的影响[J]. 吉林大学学报(工学版), 2016, 46(1): 193-198. |
[12] | 张志强, 贾晓飞, 袁秋菊. 基于Yoshida-Uemori模型的TRIP800高强钢回弹分析[J]. 吉林大学学报(工学版), 2015, 45(6): 1852-1856. |
[13] | 张志强, 贾晓飞, 赵勇, 李湘吉. 高强度硼钢淬火界面热交换系数的实验与模拟[J]. 吉林大学学报(工学版), 2015, 45(4): 1195-1199. |
[14] | 关庆丰, 李艳, 侯秀丽, 杨盛志, 王晓彤. 固溶态Mg-Gd-Y-Nd合金强流脉冲电子束表面改性[J]. 吉林大学学报(工学版), 2015, 45(4): 1200-1205. |
[15] | 马云海, 尚文博, 范雪莹, 高知辉, 佟金, 闫志峰, 常志勇. 仿骨β相磷酸三钙多孔生物陶瓷制备及降解[J]. 吉林大学学报(工学版), 2015, 45(4): 1367-1374. |
|