基于实际眼结构的个性化投影式头盔物镜研制

doi:10.13229/j.cnki.jdxbgxb20170500

吉林大学学报(工学版) ›› 2018, Vol. 48 ›› Issue (4): 1291-1297.doi: 10.13229/j.cnki.jdxbgxb20170500

基于实际眼结构的个性化投影式头盔物镜研制

全薇, 郝晓明, 孙雅东, 柏葆华, 王禹亭

吉林大学通信工程学院,长春 130012

收稿日期:2017-05-04 出版日期:2018-07-01 发布日期:2018-07-01
通讯作者: 孙雅东(1969-),女,副教授.研究方向:信息光学.E-mail:sunyadong@jlu.edu.cn
作者简介:全薇(1964-),女,教授,博士.研究方向:信息光学.E-mail:nkquanwei@163.com
基金资助:
国家自然科学基金项目(60777011); 吉林省自然科学基金项目(2014010119JC,20170101059JC).

Development of individual objective lens for head-mounted projective display based on optical system of actual human eye

QUAN Wei, HAO Xiao-ming, SUN Ya-dong, BAI Bao-hua, WANG Yu-ting

College of Communication Engineering,Jilin University,Changchun 130012,China

Received:2017-05-04 Online:2018-07-01 Published:2018-07-01

摘要/Abstract

摘要： 利用实际人眼光学系统的波前像差数据、角膜地形图数据和眼轴向深度数据建立了个体人眼光学系统。然后以能够在实际人眼视网膜上理想成像为优化目标,设计和研制了既能矫正物镜本身像差又能矫正实际人眼光学系统像差的个性化68°大视场投影式头盔物镜,给出了头盔佩带者视网膜上的成像质量,其中畸变仅为2%,横向色差为10.0 μm,分辨率为50 lp/mm,在没有采用衍射元件的情况下,加工装配后头盔物镜的总质量小于18 g,能够满足现代化高性能、大视场、轻型化头盔的要求。

关键词: 信息处理技术, 投影式头盔显示器, 视空间评价, 眼光学系统, 人眼像差

Abstract: The optical system of actual human eye was established by the wave-front aberrations, corneal topography and ocular axial length. With the goal of ideal imaging at the retina of actual human eye, an individual objective lens for had-mounted projective display with 68° large field was developed, which could correct not only the aberrations of the objective lens, but also that of human eye. The imaging quality on the living retina was analyzed. It was shown that the distortion is 2%, the lateral color aberration 10.0 μm, and the retina image resolution is 50 pl/mm. The individual objective lens is less than 18g weight after production and assembly without diffractive-optical element, which can meet the demands of modern head-mounted display in high performance, large field of view and light weight structure.

Key words: information processing technology, head-mounted projective display, optical assessment in visual space, optical system of human eye, aberrations of human eye

中图分类号:

TN927

全薇, 郝晓明, 孙雅东, 柏葆华, 王禹亭. 基于实际眼结构的个性化投影式头盔物镜研制[J]. 吉林大学学报(工学版), 2018, 48(4): 1291-1297.

QUAN Wei, HAO Xiao-ming, SUN Ya-dong, BAI Bao-hua, WANG Yu-ting. Development of individual objective lens for head-mounted projective display based on optical system of actual human eye[J]. 吉林大学学报(工学版), 2018, 48(4): 1291-1297.

参考文献

[1] Yang Jian-ming, Liu Wei-qi, Lv Wei-zhen, et al.Method of achieving a wide field-of-view head-mounted display with small distortion[J]. Optics Letters, 2013, 38(12):2035-2037.
[2] Nee A Y C, Ong S K, Chryssolouris G, et al. Augmented reality applications in design and manufacturing[J]. CIRP Annals-Manufacturing Technology, 2012, 61:657-679.
[3] Benbelkacem S, Belhocine M, Bellarbi A.Augmented reality for photovoltaic pumping systems maintenance tasks[J]. Renewable Energy, 2013, 55: 428-437.
[4] Zhu J,Ong S K, Nee A Y C. An author able context-aware augmented reality system to assist the maintenance technicians[J]. Int J Adv Manuf Technol, 2013, 66(9-12): 1699-1714.
[5] 赵秋玲,王肇圻,母国光,等. 用于LCOS微显示的折射衍射目视系统设计[J]. 科学通报, 2002, 47(10):744-748.
Zhao Qiu-ling, Wang Zhao-qi, Mu Guo-guang, et al.Refractive-diffractive visual system for micro-display of LCOS[J]. Chinese Science Bulletin, 2002, 47(10):744-748.
[6] 白瑜,邢廷文,蒋亚东,等. 基于衍射光学的头盔显示光学系统[J]. 红外与激光工程, 2012, 41(10):2753-2757.
Bai Yu, Xing Ting-wen, Jiang Ya-dong, et al.Design of head-mounted display optical system with DOE[J]. Infrared and Laser Engineering, 2012, 41(10):2753-2757.
[7] 李华,张新,王超,等. 自由曲面机载头盔显示器光学系统设计[J]. 光学学报, 2014,34(3):0322001.
Li Hua, Zhang Xin, Wang Chao, et al.Optical design of an avionic helmet-mounted displays using freeform surface[J]. Acta Optica Sinica, 2014, 34(3):0322001.
[8] 王肇圻,赵顺龙. 高清晰低畸变轻小型投影式头盔物镜设计[J]. 红外与激光工程, 2006,35(5):505-508.
Wang Zhao-qi, Zhao Shun-long.Design of objective lens for a compact head-mounted projective display with high definition and low distortion[J]. Infrared and Laser Engineering, 2006, 35(5):505-508.
[9] 吕向博,王振,魏张帆,等. 轻量化头戴显示器光学系统设计[J]. 光学学报,2015,35(10):1022007.
Lü Xiang-bo, Wang Zhen, Wei Zhang-fan, et al.Light-weight design of a helmet-mounted display optical system[J]. Acta Optica Sinica, 2015, 35(10):1022007.
[10] 卢海平,刘伟奇,康玉思,等. 超大视场头盔显示光学系统设计[J]. 光学学报,2012,32(5):522002.
Lu Hai-ping, Liu Wei-qi, Kang Yu-si,et al.Design of compact optical system in wide-angle head mounted display[J]. Acta Optica Sinica, 2012, 32(5):522002.
[11] Liang J Z, Williams D R, Miller D T.Supernormal vision and high-resolution retinal imaging through adaptive optics[J]. J Opt Soc Am, 1997, A14(11): 2884-2892.
[12] Ha Yong-gang, Rolland Jannick.Optical assessment of head-mounted displays in visual space[J]. Appl Opt, 2002, 41(25):5282-5289.
[13] 赵顺龙,王肇圻. 投影式头盔物镜设计在视空间的性能评价[J]. 光学学报, 2006,26(5):730-735.
Zhao Shun-long, Wang Zhao-qi.Optical assessment of a projection lens design for head-mounted projective displays in visual space[J]. Acta Optica Sinica, 2006, 26(5): 730-735.
[14] 范海英,王肇圻,赵顺龙. 眼模型下的投影式头盔物镜设计及视空间评价[J]. 光学学报, 2008,28(1):159-162.
Fan Hai-ying, Wang Zhao-qi, Zhao Shun-long.Design of projection lens for head-mounted displays under eye model and the optical assessment in visual space[J]. Acta Optica Sinica, 2008, 28(1):159-162.

相关文章 15

[1]	苏寒松,代志涛,刘高华,张倩芳. 结合吸收Markov链和流行排序的显著性区域检测[J]. 吉林大学学报(工学版), 2018, 48(6): 1887-1894.
[2]	徐岩,孙美双. 基于卷积神经网络的水下图像增强方法[J]. 吉林大学学报(工学版), 2018, 48(6): 1895-1903.
[3]	黄勇,杨德运,乔赛,慕振国. 高分辨合成孔径雷达图像的耦合传统恒虚警目标检测[J]. 吉林大学学报(工学版), 2018, 48(6): 1904-1909.
[4]	李居朋,张祖成,李墨羽,缪德芳. 基于Kalman滤波的电容屏触控轨迹平滑算法[J]. 吉林大学学报(工学版), 2018, 48(6): 1910-1916.
[5]	应欢,刘松华,唐博文,韩丽芳,周亮. 基于自适应释放策略的低开销确定性重放方法[J]. 吉林大学学报(工学版), 2018, 48(6): 1917-1924.
[6]	陆智俊,钟超,吴敬玉. 星载合成孔径雷达图像小特征的准确分割方法[J]. 吉林大学学报(工学版), 2018, 48(6): 1925-1930.
[7]	刘仲民,王阳,李战明,胡文瑾. 基于简单线性迭代聚类和快速最近邻区域合并的图像分割算法[J]. 吉林大学学报(工学版), 2018, 48(6): 1931-1937.
[8]	单泽彪,刘小松,史红伟,王春阳,石要武. 动态压缩感知波达方向跟踪算法[J]. 吉林大学学报(工学版), 2018, 48(6): 1938-1944.
[9]	姚海洋, 王海燕, 张之琛, 申晓红. 双Duffing振子逆向联合信号检测模型[J]. 吉林大学学报(工学版), 2018, 48(4): 1282-1290.
[10]	陈绵书, 苏越, 桑爱军, 李培鹏. 基于空间矢量模型的图像分类方法[J]. 吉林大学学报(工学版), 2018, 48(3): 943-951.
[11]	陈涛, 崔岳寒, 郭立民. 适用于单快拍的多重信号分类改进算法[J]. 吉林大学学报(工学版), 2018, 48(3): 952-956.
[12]	孟广伟, 李荣佳, 王欣, 周立明, 顾帅. 压电双材料界面裂纹的强度因子分析[J]. 吉林大学学报(工学版), 2018, 48(2): 500-506.
[13]	林金花, 王延杰, 孙宏海. 改进的自适应特征细分方法及其对Catmull-Clark曲面的实时绘制[J]. 吉林大学学报(工学版), 2018, 48(2): 625-632.
[14]	王柯, 刘富, 康冰, 霍彤彤, 周求湛. 基于沙蝎定位猎物的仿生震源定位方法[J]. 吉林大学学报(工学版), 2018, 48(2): 633-639.
[15]	于华楠, 杜瑶, 郭树旭. 基于压缩传感的高精度同步相量测量方法[J]. 吉林大学学报(工学版), 2018, 48(1): 312-318.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed

基于实际眼结构的个性化投影式头盔物镜研制

Development of individual objective lens for head-mounted projective display based on optical system of actual human eye

RICH HTML

PDF (PC)

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

Metrics

本文评价

推荐阅读 10