[1] Liu X, De Vor R E, Kapoor S G, et al. The mechanics of machining at the microscale: assessment of the current state of the science
[J]. ASME J Manuf Sci Eng, 2004,126: 666-678.

[2] Pei Q, Lu C, Lee H. Large scale molecular dynamics study of nanometric machining of copper
[J]. Comput Mater Sci, 2007, 41: 177-185.

[3] Zhu P Z, Hu Y Z, Ma T B, et al. Study of AFM-based nano-metric cutting process using molecular dynamics
[J]. Appl Surf Sci, 2010, 256(23): 7160-7164.

[4] Chu C, Tan C. Deformation analysis of nanocutting using atomistic model
[J]. Int J Solid Struct, 2009, 46: 1807-1814.

[5] Lin Z C, Huang J C. A study of the estimation method of the cutting force for a conical tool under nano-scale depth of cut by molecular dynamics
[J]. Nanotechnology, 2008, 19(11): 115701.

[6] Fang F Z, Zhang X D, Hu X T. Cylindrical coordinate machining of optical freeform surfaces
[J]. Optic Express, 2008, 16: 7323-7331.

[7] Shamoto E, Suzuki N, Hino R. Analysis of 3D elliptical vibration cutting with thin shear plane model
[J]. CIRP Ann-Manuf Tech, 2008,57: 57-60.

[8] Kim H S, Lee K I, Lee K M, et al. Fabrication of free-form surfaces using a long-stroke fast tool servo and corrective figuring with on-machine measurement
[J]. Int J Mach Tool Manufact, 2009, 49: 991-997.

[9] Li J, Van Vliet K J, Zhu T, et al. Atomistic mechanisms governing elastic limit and incipient plasticity in crystals
[J]. Nature, 2002, 418(18): 307-310.

[10] Gouldstone A, Van Vliet K J, Suresh S, et al. Simulation of defect nucleation in a crystal
[J]. Nature, 2001,411(7): 656.

[11] Choi Y, Van Vliet K J, Li J, et al. Size effects on the onset of plastic deformation during nanoindentation of thin films and patterned lines
[J]. Journal of Applied Physics, 2003, 94(9): 6050-6058.

[12] Oh S H, Legros M, Kiener D, et al. In situ observation of dislocation nucleation and escape in a submicrometre aluminium single crystal
[J]. Nature Materials, 2006(8): 95-100.

[13] Ackland G J, Jones A P. Applications of local crystal structure measures in experiment and simulation
[J]. Physical Review B, 2006, 73:054104.

[14] Pereira Z S, Silva da E Z. Study of defects in Pd thin films on Au(100) using molecular dynamics
[J]. Physical Review B, 2010,81: 195417.

[15] Plimpton S J. Fast parallel algorithms for short-range molecular dynamics
[J]. Journal of Computational Physics, 1995, 117(1): 1-19.

[16] Stukowski A. Visualization and analysis of atomistic simulation data with OVITO-the open visualization tool
[J]. Modelling Simul Mater Sci Eng, 2010, 18: 015012.

[17] Schuh C A, Mason J K, Lund A C. Quantitative insight into dislocation nucleation from high-temperature nanoindentation experiments
[J]. Nature Materials, 2005(4): 617-621.

[18] Schall P, Cohen I, Weitz1 D A, et al. Visualizing dislocation nucleation by indenting colloidal crystals
[J]. Nature, 2006,440(16): 319-323.

[19] Brocail J, Watremez M, Dubar L. Identification of a friction model for modeling of orthogonal cutting
[J]. Int J Mach Tool Manufact, 2010, 50: 807-814.

[20] Qi H S, Mills B. Formation of a transfer layer at the tool-chip interface during machining
[J]. Wear, 2000, 245: 136-147.

[21] Steven M P. Approximate entropy as a measure of system complexity
[J]. Proc Nati Acad Sci USA, 1991, 88: 2297-2310.

[22] Van Vliet K J, Li J, Zhu T, et al. Quantifying the early stages of plasticity through nanoscale experiments and simulations
[J]. Physical Review B, 2003, 67: 104105.

[23] Chen Y, Ivo P, Xue D. Fractional order control—a tutorial//American Control Conference, Hyatt Regency Riverfront, St. Louis, USA, 2009.