吉林大学学报(工学版) ›› 2015, Vol. 45 ›› Issue (5): 1468-1473.doi: 10.13229/j.cnki.jdxbgxb201505014

• • 上一篇    下一篇

平衡式两排轴向柱塞泵缸体倾覆力矩

邓海顺, 黄坤, 王传礼, 李永梅   

  1. 安徽理工大学 机械工程学院, 安徽 淮南 232001
  • 收稿日期:2014-02-21 出版日期:2015-09-01 发布日期:2015-09-01
  • 通讯作者: 王传礼(1964-),男,教授,博士.研究方向:液压传动与控制.E-mail:chlwang@aust.edu.cn
  • 作者简介:邓海顺(1978-),男,副教授,博士.研究方向:液压传动与控制.E-mail:hsdeng@aust.edu.cn
  • 基金资助:
    国家自然科学基金项目(51205002,51075001); 安徽省自然科学基金项目(1508085ME80)

Overturning moment of cylinder of balanced two-ring axial piston pump

DENG Hai-shun, HUANG Kun, WANG Chuan-li, LI Yong-mei   

  1. Department of Mechanical Engineering, Anhui University of Science and Technology, Huainan 232001, China
  • Received:2014-02-21 Online:2015-09-01 Published:2015-09-01

摘要: 分析了平衡式两排轴向柱塞泵缸体的受力情况,推导了缸体倾覆力矩的计算公式,同时也给出了使缸体、配流盘保持轴向液压力平衡的计算公式和计算程序。取内、外排柱塞同为相等偶数和同为相等奇数,利用Matlab编程绘制出其倾覆力矩随缸体转角变化的动态曲线。研究表明:内、外排柱塞同为相等奇数或偶数时,平衡式两排轴向柱塞泵内外排的倾覆力矩可部分抵消,甚至完全抵消,使其缸体总的倾覆力矩大幅降低,其倾覆力矩的波动周期不变,且内、外排柱塞同为奇数时的倾覆力矩要小于同为偶数时的倾覆力矩。

关键词: 流体传动与控制, 平衡式双排轴向柱塞泵, 缸体, 平衡性, 倾覆力矩

Abstract: The cylinder stress state of the balanced two-ring axial piston pump is analyzed, and a calculation formula of the overturning moment of the cylinder is deduced. Also the calculation formula to balance the axial hydraulic pressure of the cylinder and the port plate is obtained and program is given. When the numbers of the pistons inside and outside are both even or both odd, the dynamic curve of the overturning moment of the cylinder as a function of its turning angle is drawn using software Matlab. The results show that, when the numbers of pistons inside and outside are both even or both odd, the inside and outside overturning moments of the balanced two-ring axial piston pump can partially or even completely counteract each other. So the overturning moment of the cylinder will significantly reduce and its fluctuation period will remain the same. When the numbers of pistons inside and outside are both odd, the overturning moment will be smaller than that the numbers of pistons inside and outside are both even.

Key words: fluid power transmission and control, the balanced two-ring axial piston pump, cylinder, equilibrium, overturning moment

中图分类号: 

  • TH322
[1] 熊小平,于兰英,王国志,等.轴向柱塞泵球面配流盘倾覆力浅析[J].流体传动与控制,2009(4):25-28. Xiong Xiao-ping,Yu Lan-ying,Wang Guo-zhi, et al. The adventure analysis of spherieal valve plate in axial piston pump[J]. Fluid Power Transmission and Control, 2009 (4): 25-28.
[2] 童水光, 王相兵, 钟崴, 等. 基于虚拟样机技术的轴向柱塞泵动态特性分析[J]. 机械工程学报, 2013, 49(2): 174-182. Tong Shui-guang, Wang Xiang-bing, Zhong Wei , et al. Dynamic characteristics analysis on axial piston pump based on virtual prototype technology[J]. Journal of Mechanical Engineering, 2013, 49(2): 174-182.
[3] Bergada J, Kumar S, Davies D L, et al. A complete analysis of axial piston pump leakage and output flow ripples[J]. Applied Mathematical Modelling, 2012, 36(4): 1731-1751.
[4] Bergada J, Davies D L, Kumar S, et al. The effect of oil pressure and temperature on barrel film thickness and barrel dynamics of an axial piston pump[J]. Meccanica, 2012, 47(3): 639-654.
[5] 胡骁, 王少萍, 韩磊. 轴向柱塞泵配流副动态压力分布建模与仿真[J]. 液压气动与密封, 2012, 32(8): 68-71. Hu Xiao,Wang Shao-ping,Han Lei. Modeling and simulation on pressure distribution of plane port pair in axial piston pump[J]. Hydraulics Pneumatics & Seals, 2012, 32(8): 68-71.
[6] Edge K A, Darling J. Cylinder pressure transients in oil hydraulic pumps with sliding plate valves[J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 1986, 200(1): 45-54.
[7] 何必海, 孙健国, 叶志锋. 燃油柱塞泵滑靴副和配流副油膜计算研究[J]. 航空动力学报, 2010,25(6):1437-1442. He Bi-hai, Sun Jian-guo, Ye Zhi-feng. Calculation and analysis of film thickness for slipper pair and valve plate pair in fuel piston pump[J]. Journal of Aerospace Power, 2010,25(6):1437-1442.
[8] 杨逢瑜,马毓姝,温亚飞,等.双排式轴向柱塞泵的流量脉动分析[J].兰州理工大学学报,2010,36(6):45-47. Yang Feng-yu, Ma Yu-shu, Wen Ya-fei, et al. Analyses of flow pulsation in double-ring axial piston pump[J].Journal of Lanzhou University of Technology, 2010, 36(6): 45-47.
[9] 陈进, 方建忠, 李世六, 等. 多排式轴向柱塞泵的流体动力特性研究[J]. 建筑机械, 2007(9): 89-93. Chen Jin,Fang Jian-zhong,Li Shi-liu,et al.Fluid dynamic property study of may rows type axial piston pump[J].Construction Machinery,2007(9):89-93.
[10] 纪平. 双排式轴向柱塞泵柱塞的受力与分析[J]. 液压与气动, 2011(4): 152-155. Ji Ping. Plunger dynamics analysis of double-row-type axial piston pump[J]. Chinese Hydraulics & Pneumatics, 2011(4): 152-155.
[11] 邓海顺,王传礼,张立祥.平衡式两排轴向柱塞泵流量脉动的研究[J].农业机械学报,2014,45(5):305-309. Deng Hai-shun, Wang Chuan-li, Zhang Li-xiang. Study on flow ripple of balanced two-ring axial piston pump[J]. Transactions of the Chinese Society for Agricultural Machinery,2014, 45(5): 305-309.
[12] 李壮云. 液压元件与系统[M].2版. 北京: 机械工业出版社, 2008.
[13] 何存兴.液压传动与气压传动[M]. 武汉: 华中科技大学出版社, 2000.
[1] 姜继海, 葛泽华, 杨晨, 梁海健. 基于微分器的直驱电液伺服系统离散滑模控制[J]. 吉林大学学报(工学版), 2018, 48(5): 1492-1499.
[2] 刘建芳, 王记波, 刘国君, 李新波, 梁实海, 杨志刚. 基于PMMA内嵌三维流道的压电驱动微混合器[J]. 吉林大学学报(工学版), 2018, 48(5): 1500-1507.
[3] 刘国君, 马祥, 杨志刚, 王聪慧, 吴越, 王腾飞. 集成式三相流脉动微混合芯片[J]. 吉林大学学报(工学版), 2018, 48(4): 1063-1071.
[4] 刘祥勇, 李万莉. 包含蓄能器的电液比例控制模型[J]. 吉林大学学报(工学版), 2018, 48(4): 1072-1084.
[5] 王佳怡, 刘昕晖, 王昕, 齐海波, 孙晓宇, 王丽. 数字二次元件变量冲击机理及其抑制[J]. 吉林大学学报(工学版), 2017, 47(6): 1775-1781.
[6] 闻德生, 王京, 高俊峰, 周聪. 双定子单作用叶片泵闭死容腔的压力特性[J]. 吉林大学学报(工学版), 2017, 47(4): 1094-1101.
[7] 刘国君, 张炎炎, 杨旭豪, 李新波, 刘建芳, 杨志刚. 声表面波技术在金纳米粒子可控制备中的应用[J]. 吉林大学学报(工学版), 2017, 47(4): 1102-1108.
[8] 王丽, 刘昕晖, 王昕, 陈晋市, 梁燚杰. 装载机数字液压传动系统换挡策略[J]. 吉林大学学报(工学版), 2017, 47(3): 819-826.
[9] 李慎龙, 刘树成, 邢庆坤, 张静, 赖宇阳. 基于LBM-LES模拟的离合器摩擦副流致运动效应[J]. 吉林大学学报(工学版), 2017, 47(2): 490-497.
[10] 张敏, 李松晶, 蔡申. 基于无阀压电微泵控制的微流控液体变色眼镜[J]. 吉林大学学报(工学版), 2017, 47(2): 498-503.
[11] 闻德生, 陈帆, 甄新帅, 周聪, 王京, 商旭东. 双定子泵和马达在压力控制回路中的应用[J]. 吉林大学学报(工学版), 2017, 47(2): 504-509.
[12] 顾守东, 刘建芳, 杨志刚, 焦晓阳, 江海, 路崧. 压电式锡膏喷射阀特性[J]. 吉林大学学报(工学版), 2017, 47(2): 510-517.
[13] 张健, 姜继海, 李艳杰. 锥型节流阀流量特性[J]. 吉林大学学报(工学版), 2016, 46(6): 1900-1905.
[14] 吴维, 狄崇峰, 胡纪滨, 苑士华. 基于液压变压器的自适应换向驱动系统[J]. 吉林大学学报(工学版), 2016, 46(6): 1906-1911.
[15] 杨华勇, 王双, 张斌, 洪昊岑, 钟麒. 数字液压阀及其阀控系统发展和展望[J]. 吉林大学学报(工学版), 2016, 46(5): 1494-1505.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!