吉林大学学报(工学版) ›› 2016, Vol. 46 ›› Issue (4): 1360-1367.doi: 10.13229/j.cnki.jdxbgxb201604049
蔡金良, 孙晓颖, 赵晓晖
CAI Jin-liang, SUN Xiao-ying, ZHAO Xiao-hui
摘要: 为了准确地分析高空核电磁脉冲作用下车辆发动机舱内的电磁环境,考虑了散热器、发动机和变速箱等不同形状、位于舱内不同位置的不规则金属设备的影响,计算了舱内500多个观测点的电场强度,并依据自参考方法验证了计算结果的准确性。最后从场强空间分布、场强峰值出现频率和谐振特性三方面分析了舱内的电磁环境。结果表明:舱内场强峰值符合瑞利分布;散热器使主谐振频率发生偏移,发动机使关键区域场强增大;金属设备显著影响舱内场强峰值的最大值,使其提高约一倍。
中图分类号:
[1] Radasky W A. Introduction to the special issue on high-altitude electromagnetic pulse (EMP)[J]. IEEE Transactions on Electromagnetic Compatibility, 2013, 55(3): 410-411. [2] MIL-STD 464C. Electromagnetic environment requirements for systems[S].2010. [3] Tanaka M. A study on the electric field distribution in an automobile body for an antenna system mounted inside the body[J]. IEEE Transactions on Electromagnetic Compatibility, 1988, 37(2): 114-119. [4] Herring J L, Christopoulos C. The vehicle body as an electromagnetic shield-numerical simulation for emission and susceptibility studies[C]∥The Seventh International Conference on EMC,IEEE,New York,2009: 125-131. [5] Paletta L, Parmantier J P, Issac F, et al. Susceptibility analysis of wiring in a complex system combining a 3-D solver and a transmission-line network simulation[J]. IEEE Transactions on Electromagnetic Compatibility, 2002, 44(2): 309-317. [6] Ferrieres X, Parmantier J P, Bertuol S, et al. Application of a hybrid finite difference/finite volume method to solve an automotive EMC problem[J]. IEEE Transactions on Electromagnetic Compatibility, 2004, 46(4): 624-634. [7] Chahine I, Bunlon X, Lafon F, et al. An original approach based on data exchange between car manufacturers and suppliers to estimate susceptibility threshold by numerical simulation at early design stage[J]. IEEE Transactions on Electromagnetic Compatibility, 2013, 55(2):342-352. [8] Siah E S, Sertel K, Volakis J L, et al. Coupling studies and shielding techniques for electromagnetic penetration through apertures on complex cavities and vehicular platforms[J]. IEEE Transactions on Electromagnetic Compatibility, 2003, 45(2): 309-317. [9] Tapigure S, Klingler M, Besnier P. Electromagnetic resonances in complex structures: case of a vehicle[C]∥International Zurich Symposium on Electromagnetic Compatibility,IEEE,Zurich,2009: 437-440. [10] IEEE-STD 1597.1. IEEE standard for validation of computational electromagnetics computer modeling and simulations[S].2009. [11] Akhtarzad S, Johns P B. The solution of Maxwell's Equations in three space dimensions and time by the TLM method of numerical analysis[J]. Proceedings of the Institution of Electric Engineers, 1975, 122(12): 1344-1348. [12] Ruddle A R. Validation of simple estimates for average filed strengths in complex cavities against detailed results obtained from a 3D numerical model of a car[J]. IET Science, Measurement and Technology, 2008, 2(6): 455-466. |
[1] | 张友俊, 刘晓元. 基于信号干扰理论的差分带通滤波器[J]. 吉林大学学报(工学版), 2017, 47(3): 1003-1008. |
|