基于降维算法的结构可靠性分析

doi:10.13229/j.cnki.jdxbgxb201701026

摘要/Abstract

摘要：

为解决工程实际中功能函数为高维非线性的可靠性分析问题,提出了基于降维算法的一种新型的直接结构可靠度的分析方法。利用降维算法,建立了新的n个一维函数模型近似替代原n维功能函数,借助于泰勒级数和统计矩理论,求解结构功能函数的前四阶矩信息,并通过Edgeworth级数拟合结构功能函数的累积分布函数,结合可靠性理论可计算得到结构的失效概率。与传统方法相比,本文方法无需积分求解功能函数的统计矩,也无需迭代搜索最可能失效点。数值算例结果表明本文方法具有较高的计算精度和较好的适应性。

关键词: 工程力学, 可靠性分析, 降维算法, 泰勒级数, Edgeworth级数, 矩方法

Abstract:

Considering the high-dimensional non-linear performance functions of complex structures, a new structural reliability analysis method based on dimension reduction algorithm was proposed. The n one-dimensional approximate functions were established to substitute the n dimensional performance function by using dimension reduction algorithm. With the help of Taylor series and statistical moment theory, the first four order moments of the performance function were solved. The cumulative distribution function of the performance function was fitted by Edgeworth series and the failure probability of the structure was obtained based on the reliability theory. Compared with the traditional methods, the new method does not need to use integral method to solve the statistical moments of the performance function, and not need to search the most possible failure point iteratively. Numerical results indicate that the proposed method has high precision and good adaptability.

Key words: engineering mechanics, reliability analysis, dimension reduction method, Taylor series, Edgeworth series, moment method

中图分类号:

TB114.3

孟广伟, 冯昕宇, 周立明, 李锋. 基于降维算法的结构可靠性分析[J]. 吉林大学学报(工学版), 2017, 47(1): 174-179.

MENG Guang-wei, FENG Xin-yu, ZHOU Li-ming, Li Feng. Structural reliability analysis based on dimension reduction algorithm[J]. 吉林大学学报(工学版), 2017, 47(1): 174-179.

参考文献

[1] 张鹏军,王惠源,李强,等.弹药精确装填可靠性分析及测试[J].光学精密工程,2014,22(7):1787-1793.
Zhang Peng-jun,Wang Hui-yuan,Li Qiang,et al.Analysis and test of reliability for ammunition accurate ramming[J].Optics and Precision Engineering,2014,22(7):1787-1793.
[2] 陈传海,杨兆军,孟广伟,等.考虑多种误差影响的数控机床载荷谱编制[J].光学精密工程,2015,23(10z):355-360.
Chen Chuan-hai,Yang Zhao-jun,Meng Guang-wei,et al.Load spectra of NC machine tools considering multiple influence factors[J]. Optics and Precision Engineering,2015,23(10z):355-360.
[3] Tang X S, Li D Q, Zhou C B, et al. Copula-based approaches for evaluating slope reliability under incomplete probability information[J]. Structural Safety, 2015, 52: 90-99.
[4] Balu A S, Rao B N. Multicut-High Dimensional Model Representation for Reliability Bounds Estimation[M]. New York: Springer International Publishing, 2015: 499-510.
[5] 周志国, 卢江跃. 弯曲振动下压电陶瓷复合圆盘的可靠性分析[J]. 吉林大学学报:工学版, 2013,43(增刊1):138-142.
Zhou Zhi-guo,Lu Jiang-yue. Reliability analysis of piezoceramics composite plate under bending vibration model[J]. Journal of Jilin University (Engineering and Technology Edition), 2013,43(Sup.1):138-142.
[6] 王保群, 张强勇, 李术才, 等. 盐岩地下储气库体积收敛失效概率分析与模型试验验证[J]. 吉林大学学报:地球科学版, 2014, 44(3): 954-960.
Wang Bao-qun, Zhang Qiang-yong, Li Shu-cai,et al. Analysis of failure probability and verification of model test underground uas storage's volume convergence in salt rock[J]. Journal of Jilin University(Earth Science Edition), 2014, 44(3): 954-960.
[7] Alibrandi U, Alani A M, Ricciardi G. A new sampling strategy for SVM-based response surface for structural reliability analysis[J]. Probabilistic Engineering Mechanics, 2015, 41: 1-12.
[8] Arastu M, Datta T K. Reliability analysis using genetic algorithm under seismic load[J]. Research Journal of Science and Technology, 2015, 7(1): 9-13.
[9] Dai H, Zhang H, Wang W. A multiwavelet neural network‐based response surface method for structural reliability analysis[J]. Computer-Aided Civil and Infrastructure Engineering, 2015, 30(2): 151-162.
[10] Rahman S, Wei D. A univariate approximation at most probable point for higher-order reliability analysis[J]. International Journal of Solids and Structures, 2006, 43(9): 2820-2839.
[11] Kong C, Sun Z, Niu X, et al. Moment methods for C/SiC woven composite components reliability and sensitivity analysis[J]. Science and Engineering of Composite Materials, 2014, 21(1): 121-128.
[12] Vrbik J. Moments of AR( k ) parameter estimators[J]. Communications in Statistics-Simulation and Computation, 2014, 44(5):1239-1252.
[13] Rivlin Y, Pinchas M. Edgeworth expansion based model for the convolutional noise pdf[J]. Mathematical Problems in Engineering, 2014,2014(4):1-19.
[14] Kah D, Emre O, Tran Q H, et al. High order moment method for polydisperse evaporating sprays with mesh movement: application to internal combustion engines[J]. International Journal of Multiphase Flow, 2015,71:38-65.
[15] Pearson P B. The impact of school-level factors on minority students' performance in AP calculus[D]. Warsaw: Portland State University,2014.
[16] Kim S D, Hammond R K, Bickel J E. Improved mean and variance estimating formulas for PERT analyses[J]. IEEE Transactions on Engineering Management, 2014, 61(2): 362-369.
[17] Abelev B,Adam J,Adamová D,et al. Multiplicity dependence of pion, kaon, proton and lambda production in p-Pb collisions at s NN = 5.02 TeV mathContainer Loading Mathjax[J]. Physics Letters B, 2014, 728(1): 25-38.
[18] Risti c ' M, Kundu D. Marshall-Olkin generalized exponential distribution[J]. Metron, 2015,73(3): 1-17.
[19] Duncan J, Wu Q, Promislow K, et al. Biased gradient squared descent saddle point finding method[J]. Journal of Chemical Physics, 2014, 140(19): 194102.
[20] Plasencia M, Pedersen A, Arnaldsson A, et al. Geothermal model calibration using a global minimization algorithm based on finding saddle points and minima of the objective function[J]. Computers & Geosciences, 2014, 65: 110-117.
[21] Chao Z, Chen G. A note on semi-convergence of generalized parameterized inexact Uzawa method for singular saddle point problems[J]. Numerical Algorithms, 2015, 68(1): 95-105.
[22] Shi X, Teixeira A P, Zhang J, et al. Structural reliability analysis based on probabilistic response modelling using the maximum entropy method[J]. Engineering Structures, 2014, 70(9): 106-116.
[23] Peco C, Millán D, Rosolen A, et al. Efficient implementation of Galerkin meshfree methods for large-scale problems with an emphasis on maximum entropy approximants[J]. Computers & Structures, 2015, 150: 52-62.
[24] 宋述芳, 吕震宙. 基于鞍点估计及其改进法的可靠性灵敏度分析[J]. 力学学报, 2011, 43(1): 162-168.
Song Shu-fang, Lyu Zhen-zhou. The reliability sensitivity analysis based on saddlepoint approximation and its improved method[J]. Chinese Journal of Theoretical and Applied Mechanics,2011, 43(1): 162-168.

相关文章 15

[1]	尼颖升,孙启鑫,马晔,徐栋,刘超. 基于空间网格分析的多箱室波形钢腹板组合梁腹板剪力分配[J]. 吉林大学学报(工学版), 2018, 48(6): 1735-1746.
[2]	闫亚宾, 王晓媛, 万强. 纳米尺度界面低周疲劳破坏行为[J]. 吉林大学学报(工学版), 2017, 47(4): 1201-1206.
[3]	陈江义, 刘保元. 纤维断裂损伤对复合材料板中导波频散特性的影响[J]. 吉林大学学报(工学版), 2017, 47(1): 180-184.
[4]	杨慧艳, 何晓聪, 周森. 压印接头强度的有限元模型及理论计算方法[J]. 吉林大学学报(工学版), 2015, 45(3): 864-871.
[5]	张庆, 王磊. 基于微分方程组的多排桩内力分析[J]. 吉林大学学报(工学版), 2014, 44(5): 1327-1333.
[6]	周志国, 卢江跃. 弯曲振动下压电陶瓷复合圆盘的可靠性分析[J]. 吉林大学学报(工学版), 2013, 43(增刊1): 138-142.
[7]	赵世佳, 徐涛, 陈炜, 谭丽辉. 接近亏损系统模态灵敏度分析的有效算法[J]. 吉林大学学报(工学版), 2013, 43(增刊1): 497-499.
[8]	王晓燕, 申桂香, 张英芝, 郑珊, 牛序磊, 梁栋. 基于DEMATEL方法的数控装备故障相关性分析[J]. 吉林大学学报(工学版), 2012, 42(增刊1): 100-103.
[9]	徐涛, 赵世佳, 张炜, 谭丽辉, 吕岗, 李恒. N重亏损系统摄动的原点移位组合近似方法[J]. 吉林大学学报(工学版), 2012, 42(增刊1): 147-150.
[10]	闫光, 范舟, 李钟海, 程小全, 刘克格, 左春柽. 复合材料加口盖柱壳的设计与分析[J]. , 2012, (06): 1437-1441.
[11]	张英芝¹,郑锐²,申桂香¹,王志琼¹,李怀洋¹,郑珊¹. 基于Copula理论的数控装备故障相关性[J]. 吉林大学学报(工学版), 2011, 41(6): 1636-1640.
[12]	李春良^1,2,王国强¹,刘福寿³,赵凯军⁴. 盾构管片结构的力学行为分析[J]. 吉林大学学报(工学版), 2011, 41(6): 1669-1674.
[13]	张道明¹,郭学东²,赵志蒙³. 钢筋混凝土梁弯曲损伤分析的摄动法[J]. 吉林大学学报(工学版), 2011, 41(05): 1358-1363.
[14]	陈耕野, 王彦召, 姚战卫. 平行弦钢桁架应力与感应电动势随荷载的变化[J]. 吉林大学学报(工学版), 2010, 40(增刊): 222-0227.
[15]	贾超, 纪圣振, 张峰. 青岛海湾大桥混凝土墩的时变可靠度[J]. 吉林大学学报(工学版), 2010, 40(06): 1543-1549.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed