吉林大学学报(工学版) ›› 2017, Vol. 47 ›› Issue (5): 1568-1576.doi: 10.13229/j.cnki.jdxbgxb201705032

• • 上一篇    下一篇

基于混沌多项式展开法的线束串扰统计模型

王天皓1, 王忠福2, 王雨蒙2, 杨开宇2, 高印寒2, 马喜来3   

  1. 1.吉林大学 仪器科学与电气工程学院,长春 130061;
    2.吉林大学 汽车仿真与控制国家重点实验室,长春130022;
    3.中国第一汽车股份有限公司 技术中心,长春 130011
  • 收稿日期:2016-07-21 出版日期:2017-09-20 发布日期:2017-09-20
  • 通讯作者: 杨开宇(1971-),男,副教授,博士.研究方向:汽车电子,电磁兼容及车辆测试技术.E-mail:yangky@jlu.edu.cn
  • 作者简介:王天皓(1988-),男,在站博士后.研究方向:汽车电子,电磁兼容及车辆测试技术.E-mail:wangtianhao2006@126.com
  • 基金资助:
    吉林省基础研究计划基金项目(20150101029JC)

Statistic analysis of cable bundle crosstalk based on polynomial chaos expansion

WANG Tian-hao1, WANG Zhong-fu2, WANG Yu-meng2, YANG Kai-yu2, GAO Yin-han2, MA Xi-lai3   

  1. 1.College of Instrumental & Electrical Engineering, Jilin University,Changchun 130061,China;
    2.State Key Laboratory of Automotive Simulation and Control, Jilin University,Changchun 130022,China;
    3.R&D Center, FAW Group Corporation, Changchun 130011,China
  • Received:2016-07-21 Online:2017-09-20 Published:2017-09-20

摘要: 针对线束导线在实际情况中为非确定性几何布置的这一问题,提出了一种基于混沌多项式展开法的线束串扰统计分析方法。该方法根据线束导线位置变量的分布类型选取相应的正交多项式对线束导线分布参数进行展开,结合边界条件,采用模式理论对基于混沌多项式展开的多导体传输线方程扩展形式进行求解,进而得到电压和电流向量的混沌多项式展开表达式,并利用混沌多项式展开法的相关性质得到表征线束串扰统计特征的相关参数。通过与传统的蒙特卡法进行对比可知,该方法在保证计算结果准确可靠的同时,计算效率也得到了大幅度的提高,从而实现复杂系统线束电磁兼容性能的高效预测。

关键词: 仪器仪表技术, 混沌多项式展开, 线束串扰, 多导体传输线, 统计分析

Abstract: For the phenomenon that the position of cable bundle in reality is non-deterministic geometric, this paper proposes the statistical analysis method of cable bundle crosstalk model based on Polynomial Chaos Expansion. The orthogonal polynomial basis functions are chosen based on the distribution pattern of the variables related to the positions of wires in the cable bundle, and the distributed parameters of the wires can be expressed by the Polynomial Chaos Expansion. With the boundary conditions, the extended MTL can be solved by the modeling methodology, and then the voltage vector and current vector can be expressed by the Polynomial Chaos Expansion. According to the properties of the Polynomial Chaos Expansion, the mean, standard deviation and variation range of the cable bundle crosstalk can be obtained, and the probability density function of the cable bundle crosstalk can also becalculatedthrough numerical method. Thus, the efficient prediction of electromagnetic compatibility of cable bundle in complex system has realized.

Key words: technology of instrument and meter, polynomial chaos expansion, cable bundle crosstalk, multi-conductor transmission lines, statistical analysis

中图分类号: 

  • TM930.11
[1] Paul Clayton R. 电磁兼容导论[M]. 闻映红,译.北京:人民邮电出版社,2007: 324.
[2] Frei S, Jobava R G, Topchishvili D.Complex approaches for the calculation of EMC problems of large systems[C]∥International Symposium on Electromagnetic Compatibility,Santa Clara,USA,2004:826-831.
[3] Capraro G T, Paul C R. Design of the routing for EMC[C]∥The 21st International Symposium on Electromagnetic Compatibility, 1979.
[4] 孙亚秀, 卓庆坤, 姜庆辉, 等.基于多导体传输线理论的差模激励新型线束串扰模型研究[J].物理学报,2015,64(4): 1-13.
Sun Ya-xiu, Zhuo Qing-kun,Jiang Qing-hui,et al. New differential-mode-source cable bundle crosstalk model based on multiconductor transmission lines theory[J].Acta Phys Sin, 2015, 64(4):1-13.
[5] Ni G Y, Yan L, Yuan N C.Time-domain analytic solutions of two-wire transmission line excited by a plane-wave field[J]. Chinese Physics B, 2008, 17(10):3629-3634.
[6] Paul Clayton R. 多导体传输线分析[M].杨晓宪,郑涛,译.北京:中国电力出版社,2013:312-313.
[7] 吴振军,王丽芳,廖承林.分析端接频变负载的多导体传输线FDTD新方法[J]. 物理学报, 2009, 58(9):6146-6151.
Wu Zhen-jun, Wang Li-fang,Liao Cheng-lin.A novel FDTD method for multi-conductor transmission lines terminating in frequency-dependent loads[J]. Acta Phys Sin,2009, 58(9):6146-6151.
[8] Ferrieres X, Parmantier J P, Bertuol S, et al. Application of a hybrid finite difference/finite volume method to solve an automotive EMC problem[J]. IEEE Transactions on Electromagnetic Compatibility,2004,46(4):624-634.
[9] Zhang Q, Liou J J, Mcmacken J, et al. Development of robust interconnect model based on design of experiments and multiobjective optimization[J]. IEEE Transactions on Electron Devices,2001,48(9):1885-1891.
[10] Bellan D, Pignari S. A.probabilistic model for the response of an electrically short two-conductor transmission line driven by a random plane wave field[J]. IEEE Transactions on Electromagnetic Compatibility, 2001, 43(2):130-139.
[11] Shiran S, Reiser B, Cory H. A probabilistic method for the evaluation of coupling between transmission lines[J]. IEEE Transactions on Electromagnetic Compatibility, 1993, 35(3):387-393.
[12] Salio S, Canavero F, Lefebvre J, et al. Statistical description of signal propagation on random bundles of wires[C]∥The 13th International Zurich Symposium Electromagnetic Compatibility, Zurich Switizerland,1999: 499-504.
[13] 高印寒, 王天皓, 杨开宇,等. 汽车线束的动态串扰特性预测[J]. 吉林大学学报:工学版, 2014, 44(5):1258-1263.
Gao Yin-han, Wang Tian-hao, Yang Kai-yu,et al.Prediction of the dynamic crosstalk of automotive wiring hardness[J].Journal of Jilin University (Engineering and Technology Edition) 2014, 44(5):1258-1263.
[14] Sun S, Liu G, Drewniak J L, et al. Hand-assembled cable bundle modeling for crosstalk and common-mode radiation prediction[J]. IEEE Transactions on Electromagnetic Compatibility, 2007, 49(3):708-718.
[15] Wu M, Beetner D, Hubing T, et al. Estimation of the statistical variation of crosstalk in wiring harnesses[C]∥IEEE International Symposium on Electromagnetic Compatibility, Detroit,USA, 2008:614-619.
[16] Wu M, Beetner D G, Hubing T H, et al. Statistical prediction of "reasonable worst-case" crosstalk in cable bundles[J]. IEEE Transactions on Electromagnetic Compatibility, 2009, 51(3):842-851.
[17] Diouf F, Canavero F. Crosstalk statistics via collocation method[C]∥ IEEE International Symposium on Electromagnetic Compotibility, Austin, TX,USA, 2009:92-97.
[18] Salio S, Canavero F, Lecointe D, et al. Crosstalk prediction on wire bundles by Kriging approach[C]∥IEEE International Symposium on Electromagnetic Compatibility, Washington DC,USA, 2000:197-202.
[19] Bellan D, Pignari S A, Spadacini G. Characterisation of crosstalk in terms of mean value and standard deviation multiconductor transmission lines[J]. IEE Proceedings on Science, Measurement and Technology,2003,150(6):289-295.
[20] Bellan D, Pignari S A, Spadacini G.Characterisation of crosstalk in terms of mean value and standard deviation multiconductor transmission lines[J].IEE Proceedings on Science, Measurement and Technology,2003, 150(6): 289-295.
[21] Halligan M S, Beetner D G.Maximum crosstalk estimation in weakly coupled transmission lines[J].IEEE Transactions on Electromagnetic Compatibility, 2014, 56(3):736-744.
[22] Wiener N. The homogeneous chaos[J]. American Journal of Mathematics, 1938, 60(1):897-936.
[23] Ghanem R G, Spanos P D. Stochastic Finite Elements:a Spectral Approach[M]. Berlin:Springer, 1991: 224.
[24] Ghanem R. Ingredients for a general purpose stochastic finite elements implementation[J]. Computer Methods in Applied Mechanics & Engineering, 1999, 168(1-4):19-34.
[25] Finette S. A stochastic representation of environmental uncertainty and its coupling to acoustic wave propagation in ocean waveguides[J]. Acoustical Society of America Journal, 2006, 120(5): 2567.
[26] Xiu D, Karniadakis G E.The wiener-askey polynomial chaos for stochastic differential equations[J]. SIAM Journal on Scientific Computing, 2002, 24(2):619-644.
[27] Xiu D, Karniadakis G E.A new stochastic approach to transient heat conduction modeling with uncertainty[J]. International Journal of Heat & Mass Transfer, 2003, 46(24):4681-4693.
[28] Stievano I S, Manfredi P, Canavero F G. Carbon nanotube interconnects:process variation via polynomial chaos[J]. IEEE Transactions on Electromagnetic Compatibility, 2012, 54(1):140-148.
[29] Cameron R H, Martin W T.The orthogonal development of non-linear functionals in series of fourier-hermite functionals[J]. Annals of Mathematics, 1947, 48(48):385-392.
[30] 王晓东, 康顺.多项式混沌方法在随机方腔流动模拟中的应用[J].中国科学:技术科学, 2011, 33(6):790-798.
Wang Xiao-dong, Kang Shun. Application of polynomial chaos on numerical simulation of stochastic cavity flow[J].Science China: Technological Sciences,2011,33(6): 790-798.
[31] 高印寒, 王瑞宝, 马玉刚,等. 汽车线束导线间寄生电容及串扰的解析预测模型[J]. 吉林大学学报:工学版, 2011, 41(增刊1):144-149.
Gao Yin-han, Wang Rui-bao, Ma Yu-gang, et al. Analytical prediction of parasitic capacitance and crosstalk in automotive cable bundles[J]. Journal of Jilin University (Engineering and Technology Edition) , 2011 ,41 (Sup.1) 144-149.
[32] Paul C R. Decoupling the multiconductor transmission line equations[J]. IEEE Transactions on Microwave Theory & Techniques,1996,44(8):1429-1440.
[33] Papoulis A. Probability, Random Variables and Stochastic Processes[M].3rd ed. New York: McGraw-Hill,1991:207-209.
[1] 仇艳凯, 李宝仁, 杨钢, 曹博, 刘真. 新型液压消声器吸收液压系统压力脉动的机理和特性[J]. 吉林大学学报(工学版), 2018, 48(4): 1085-1091.
[2] 吴疆, 徐壮, 刘丽佳, 嵇艳鞠, 李肃义. 基于环绕式血氧探头的睡眠呼吸暂停综合征检测装置原型设计与开发[J]. 吉林大学学报(工学版), 2018, 48(2): 640-644.
[3] 杨诚, 宋萍, 彭文家, 金昊龙, 潘志强. 基于混合总线的装甲车辆实车综合测试系统设计[J]. 吉林大学学报(工学版), 2018, 48(1): 186-198.
[4] 杨诚, 宋萍, 彭文家, 邓高寿, 刘雄军. 装甲车辆综合测试系统上位机平台设计[J]. 吉林大学学报(工学版), 2017, 47(6): 1796-1803.
[5] 柏德恩, 全齐全, 李贺, 陈雅文, 邓宗全. 伺服加载的谐波减速器启动力矩测试系统[J]. 吉林大学学报(工学版), 2017, 47(6): 1804-1810.
[6] 陈赫, 杨智君, 吴昭春, 冯志刚, 赵科佳, 李抵非, 田地. 标准失真模拟分量视频信号源及其校准方法[J]. 吉林大学学报(工学版), 2017, 47(4): 1159-1164.
[7] 刘晓为, 李海, 翁睿, 张海峰, 赵军. 应用静电力矩改善新型转子式陀螺的动态特性[J]. 吉林大学学报(工学版), 2017, 47(3): 850-854.
[8] 林君, 赵越, 蒋川东, 王应吉. 基于优化Block反演的地面磁共振测深新方法[J]. 吉林大学学报(工学版), 2017, 47(2): 530-539.
[9] 张飞, 单忠德, 任永新, 聂军刚, 刘丰. 缸盖缺陷检测系统线阵相机现场标定方法[J]. 吉林大学学报(工学版), 2017, 47(2): 540-545.
[10] 訚耀保, 原佳阳, 傅俊勇. 先导阀前腔串加阻尼孔的新型双级溢流阀特性[J]. 吉林大学学报(工学版), 2017, 47(1): 129-136.
[11] 林君, 杨宇, 胡雪岩, 王世隆. 基于感性负载的瞬变电磁发射波形控制技术[J]. 吉林大学学报(工学版), 2016, 46(5): 1718-1724.
[12] 于生宝, 苏发, 郑建波, 朱占山. 基于LabVIEW的瞬变电磁接收系统设计[J]. 吉林大学学报(工学版), 2016, 46(5): 1725-1731.
[13] 申茂冬, 程德福, 安战峰, 王一, 赵静. 五棱台式全张量磁梯度探头侧面倾角优化方法[J]. 吉林大学学报(工学版), 2016, 46(5): 1732-1738.
[14] 闫光, 庄炜, 刘锋, 祝连庆. 具有增敏效果的光纤光栅应变传感器的预紧封装及传感特性[J]. 吉林大学学报(工学版), 2016, 46(5): 1739-1745.
[15] 林君, 赵越, 蒋川东, 李同, 刘孝男. 基于Hammer积分的三维地面磁共振高精度正演方法[J]. 吉林大学学报(工学版), 2016, 46(2): 609-615.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 张学广, 刘纯国, 郑愿, 江仲海, 李湘吉. 基于延性损伤和剪切损伤的铝合金成形极限预测[J]. 吉林大学学报(工学版), 2016, 46(5): 1558 -1566 .
[2] 王攀, 鲁俊, 邓兆祥, 廖海辰, 王正亚, 阳小光. 基于状态观测器的机敏约束阻尼板模态控制[J]. 吉林大学学报(工学版), 2016, 46(4): 1057 -1064 .
[3] 卢彦飞, 张涛, 郑健, 李铭, 章程. 基于局部标准差与显著图的模糊图像质量评价方法[J]. 吉林大学学报(工学版), 2016, 46(4): 1337 -1343 .
[4] 胡冠宇, 乔佩利. 混沌协方差矩阵自适应进化策略优化算法[J]. 吉林大学学报(工学版), 2017, 47(3): 937 -943 .
[5] 朱冰, 冯瑶, 赵健, 吴坚, 王鹏飞, 汪昶. 商用半挂车制动迟滞补偿系统设计与分析[J]. 吉林大学学报(工学版), 2017, 47(5): 1352 -1357 .
[6] 郎利辉, 阚鹏, 王耀, 孙志莹, 张泉达. 铝合金板材三向应力状态下的成形性能[J]. 吉林大学学报(工学版), 2017, 47(5): 1527 -1533 .
[7] 刘让, 王德江, 张刘, 周达标, 贾平, 丁鹏. 基于梯度天空背景的非均匀性校正和点目标探测[J]. 吉林大学学报(工学版), 2017, 47(5): 1625 -1633 .
[8] 孙晓颖, 扈泽正, 杨锦鹏. 基于分层贝叶斯网络的车辆发动机系统电磁脉冲敏感度评估[J]. 吉林大学学报(工学版), 2018, 48(4): 1254 -1264 .
[9] 顾海军, 田雅倩, 崔莹. 基于行为语言的智能交互代理[J]. 吉林大学学报(工学版), 2018, 48(5): 1578 -1585 .
[10] 毕秋实,王国强,黄婷婷,毛瑞,鲁艳鹏. 基于DEM-FEM耦合的双齿辊破碎机辊齿强度分析[J]. 吉林大学学报(工学版), 2018, 48(6): 1770 -1776 .