Journal of Jilin University(Engineering and Technology Edition) ›› 2023, Vol. 53 ›› Issue (9): 2533-2541.doi: 10.13229/j.cnki.jdxbgxb.20211225

Previous Articles     Next Articles

Interface slip calculation of prefabricated steel⁃concrete composite beams with clustering studs

Liang FAN1,2(),Ying-ming XU1,Yang TAN1   

  1. 1.School of Civil Engineering，Chongqing Jiaotong University，Chongqing 400074，China
    2.State Key Laboratory of Mountain Bridge and Tunnel Engineering，Chongqing Jiaotong University，Chongqing 400074，China
  • Received:2021-11-16 Online:2023-09-01 Published:2023-10-09

RICH HTML

 1   

PDF (PC)

172

Abstract:

For fabricated steel-concrete composite beams composed of concrete slabs with reserved post-pouring holes and steel beam with arranged discrete shear connectors， the interface slip distribution theory of fabricated steel-concrete composite beam with discrete interface shear connection is studied. Based on the beam deformation theory， fabricated composite beams with discrete shear connection are divided into shear connection area and non-shear connection area and the interface slip differential equations are established respectively based the displacement continuity and deformation coordination conditions. The interface slip distribution expression of intermittent shear connection composite beam are formulated， and the analytical expression of interface slip distribution under concentrated load and uniform load are solved. Through comparing with the existing slip distribution equation of continuous shear connection composite beam and the measured data of fabricated composite beam test， the slip distribution algorithm is verified. The influence of various parameters on slip and deformation of fabricated composite beams is analized with the parameters as the height ratio of concrete slab to steel beam， the shear connection degree and the clustering degree （an index reflecting the degree of bond clustering， defined as the ratio of the number of shear connectors in a （row） reserved hole to the number of shear connectors in the beam）. The results show that the interface slip decreases with the increase of the shear connection degree， and increases with the increase of the height ratio and the clustering degree； the larger the clustering degree， the more uneven slip distribution， and peak value appears in the non-shear connection area.

Key words: structure engineering, steel-concrete composite beam, interface slip, analytical algorithm, fabricate, clustering studs

CLC Number: 

  • TU398

Fig.1

Schematic diagram of interface shear force distribution of cast-in-place and fabricated composite beams"

Fig.2

Load state of micro element"

Fig.3

Strain distribution"

Fig.4

Isolated body"

Fig.5

Test beam structure drawing and measuring point layout"

Fig.6

Specimen of test beam"

Fig.7

Slip comparison of calculated and measured"

Fig.8

Calculated and measured strain of the bottom of the concrete slab and the top of the steel beam"

Table 1

Height ratio"

序号混凝土板厚度/mm钢梁高度/mm高度比
15022380.022
215022380.067
325022380.112
435022380.156
540022380.179
650022380.223

Table 2

Clustering degree"

序号预留孔数量单孔剪力键数量剪力键总数集束度
120244800.050
212404800.083
38604800.125
45964800.200
531604800.333

Fig.9

Interface slip distribution curve"

Fig.10

Influence of different parameters on the mid-span deflection"

1 肖辉, 李爱群, 陈丽华, 等. 钢与混凝土组合梁的发展、研究和应用[J]. 特种结构, 2005, 22(1): 38-41.
Xiao Hui, Li Ai-qun, Chen Li-hua, et al. Development, research and application of steel and concrete composite beam [J]. Special Structures, 2005, 22(1): 38-41.
2 聂建国, 陶慕轩, 吴丽丽, 等. 钢-混凝土组合结构桥梁研究新进展[J]. 土木工程学报, 2012, 45(6): 110-122.
Nie Jian-guo, Tao Mu-xuan, Wu Li-li, et al. Advances of research on steel-concrete composite bridges[J]. China Civil Engineering Journal, 2012, 45(6): 110-122.
3 聂建国, 沈聚敏. 滑移效应对钢-混凝土组合梁弯曲强度的影响及其计算[J]. 土木工程学报, 1997(1): 31-36.
Nie Jian-guo, Shen Ju-min. Slip effect on strength of composite steel-concrete beams[J]. China Civil Engineering Journal, 1997(1): 31-36.
4 Johnson R P. Composite Structures of Steel and Concrete, vol 1: Beams, Columns, Frames and Applications in Buildings[M]. 3rd ed. Oxford: Blackwell Scientific, 2004.
5 Johnson R P, Molenstra N. Partial shear connection in composite beams for buildings[J]. Proceedings of the Institution of Civil Engineers, 1991, 91(4): 679-704.
6 范亮, 谭阳, 李成君, 等. 装配式群钉组合梁与现浇组合梁对比试验研究[J]. 公路交通科技, 2020,37(6): 59-67.
Fan Liang, Tan Yang, Li Cheng-jun, et al. Comparative experimental study on fabricated group nail composite beam and cast-in-situ composite beam[J]. Highway Transportation Technology, 2020, 37(6): 59-67.
7 Newmark N M, Siess C P, Viest I M. Tests and analysis of composite beams with incomplete interaction[J]. Proceedings of the Society for Experimental Stress Analysis, 1951, 9(1): 75-92.
8 蒋丽忠, 余志武, 李佳. 均布荷载作用下钢-混凝土组合梁滑移及变形的理论计算[J]. 工程力学, 2003, 20(2): 133-137.
Jiang Li-zhong, Yu Zhi-wu, Li Jia. Theoretical calculation of slip and deformation of steel-concrete composite beams under uniformly distributed loads[J]. Engineering Mechanics, 2003, 20(2): 133-137.
9 聂建国.钢-混凝土组合结构:试验、理论与应用[M]. 北京:科学出版社,2005.
10 周世军, 江瑶, 吴云丹, 等.考虑滑移和剪切变形的单箱双室组合箱梁剪力滞效应[J]. 土木建筑与环境工程, 2017, 39(3): 20-27.
Zhou Shi-jun, Jiang Yao, Wu Yun-dan, et al. Shear lag effect of twin-cell composite beams considering slip and shear deformation[J]. Civil Construction and Environmental Engineering, 2017, 39(3): 20-27.
11 项贻强, 何超超, 邱政. 体外预应力钢-混组合梁长期滑移计算[J]. 浙江大学学报: 工学版, 2017, 51(4): 739-744.
Xiang Yi-qiang, He Chao-chao, Qiu Zheng. Calculation of long-term slippage for externally prestressing steel-concrete composite beam[J]. Journal of Zhejiang University (Engineering Science Edition), 2017, 51(4): 739-744.
12 郑则群, 房贞政, 宗周红. 预应力钢-混凝土组合梁非线性有限元解法[J]. 哈尔滨工业大学学报, 2004, 36(2): 218-222.
Zheng Ze-qun, Fang Zhen-zheng, Zong Zhou-hong. Finite element nonlinear method of prestressed steel-concrete composite beams[J]. Journal of Harbin Institute of Technology, 2004, 36(2): 218-222.
13 Gara F, Ranzi G, Leoni G. Short-and long-term analytical solutions for composite beams with partial interaction and shear-lag effects[J]. International Journal of Steel Structures, 2010, 10(4):359-372.
14 Angelo M T, Luigino D. Creep effects in composite beams with flexible shear connectors[J]. Journal of Structural Engineering, 1992, 118(8): 2063-2080.
15 Nie J G, Cai C S, Zhou T R, et al. Experimental and analytical study of prestressed steel-concrete composite beams considering slip effect[J]. Journal of Structural Engineering, 2007, 133(4):530-540.
[1] Ya-feng GONG,Shu-zheng WU,Hai-peng BI,Guo-jin TAN. Temperature field and frost heaving analysis of prefabricated box culvert based on field monitoring [J]. Journal of Jilin University(Engineering and Technology Edition), 2023, 53(8): 2321-2331.
[2] Jian-qing BU,Zhi-bo GUO,Ji-ren ZHANG,Jing-chuan XUN,Xiao-ming HUANG. Finite element analysis method for mechanical properties of steel⁃concrete composite beam bridges with multiple damages [J]. Journal of Jilin University(Engineering and Technology Edition), 2023, 53(6): 1621-1637.
[3] Yan-qing ZHANG,Yu-xuan LYU,Shi HAN,Long-fei YOU,Jun ZENG,Fei-yang HOU. Experimental research on flexural performance of tubular roof prefabricated structural components [J]. Journal of Jilin University(Engineering and Technology Edition), 2023, 53(5): 1390-1399.
[4] Qing-feng YAN,Ji-gang ZHANG,Tao WANG,De-gang CHEN,You-sheng YU,Ying-chun YANG. Seismic performance of connection joints between prefabricated prefinished volumetric construction [J]. Journal of Jilin University(Engineering and Technology Edition), 2023, 53(2): 505-514.
[5] Ya-chuan KUANG,Li-bin CHEN,Chao-ju LI,Yu-hao HE. Analysis of mechanical properties of stud shear connectors [J]. Journal of Jilin University(Engineering and Technology Edition), 2023, 53(2): 538-546.
[6] Qi-kai SUN,Nan ZHANG,Xiao LIU,Zi-ji ZHOU. Dynamic reduction coefficients of steel⁃concrete composite beam based on Timoshenko beam theory [J]. Journal of Jilin University(Engineering and Technology Edition), 2023, 53(2): 488-495.
[7] Ya-feng GONG,Yun-ze PANG,Bo WANG,Guo-jin TAN,Hai-peng BI. Mechanical properties of new prefabricated box culvert structure based on road conditions in Jilin Province [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(3): 917-924.
[8] Ya-feng GONG,Jia-xiang SONG,Hai-peng BI,Guo-jin TAN,Guo-hai HU,Si-yuan LIN. Static test and finite element analysis of scale model of fabricated box culvert [J]. Journal of Jilin University(Engineering and Technology Edition), 2020, 50(5): 1728-1738.
[9] Ya-feng GONG,Bo WANG,Guo-jin TAN,Li-min ZHANG,Wen-ding WU,Hai-peng BI. Comparative analysis of mechanical characteristics of two typical fabricated culverts in Jilin [J]. Journal of Jilin University(Engineering and Technology Edition), 2019, 49(6): 1865-1870.
[10] DAI Yan, NIE Shao-feng, ZHOU Tian-hua. Finite element analysis of hysteretic behavior of square steel tube confined steel reinforced concrete column steel frame ring beam joint [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1426-1435.
[11] WEI Zhi-gang, SHI Cheng-lin, LIU Han-bing, ZHANG Yun-long. Dynamic characteristics of steel-concrete composite simply supported beam under vehicles [J]. 吉林大学学报(工学版), 2017, 47(6): 1744-1752.
[12] WANG Shao-jie, XU Zhao-dong, LI Shu, WANG Kai-yang, Dyke Shirley J. Differential settlement identification of pier for continuous beam based on strain monitoring [J]. 吉林大学学报(工学版), 2016, 46(4): 1090-1096.
[13] HOU Zhong-ming, WANG Yuan-qing, XIA He, ZHANG Tian-shen. Simply-supported steel-concrete composite beams under moving load [J]. 吉林大学学报(工学版), 2015, 45(5): 1420-1427.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] LI Shoutao, LI Yuanchun. Autonomous Mobile Robot Control Algorithm Based on Hierarchical Fuzzy Behaviors in Unknown Environments[J]. 吉林大学学报(工学版), 2005, 35(04): 391 -397 .
[2] Li Hong-ying; Shi Wei-guang;Gan Shu-cai. Electromagnetic properties and microwave absorbing property
of Z type hexaferrite Ba3-xLaxCo2Fe24O41[J]. 吉林大学学报(工学版), 2006, 36(06): 856 -0860 .
[3] Zhang Quan-fa，Li Ming-zhe，Sun Gang，Ge Xin . Comparison between flexible and rigid blank-holding in multi-point forming[J]. 吉林大学学报(工学版), 2007, 37(01): 25 -30 .
[4] . [J]. 吉林大学学报(工学版), 2007, 37(06): 1284 -1287 .
[5] Liu Han-bing, Jiao Yu-ling, Liang Chun-yu,Qin Wei-jun . Effect of shape function on computing precision in meshless methods[J]. 吉林大学学报(工学版), 2007, 37(03): 715 -0720 .
[6] Yang Qing-fang, Chen Lin . Division approach of traffic control work zone[J]. 吉林大学学报(工学版), 2006, 36(增刊2): 139 -142 .
[7] Li Cheng, Liu Zhi-hua, Zhang Ping . Analysis on stress and displacement of a composite flywheel composed of twolayer rotor with pre-displacement[J]. 吉林大学学报(工学版), 2007, 37(04): 828 -832 .
[8] Li Yue-ying，Liu Yong-bing，Chen Hua . Surface hardening and tribological properties of a cam materials[J]. 吉林大学学报(工学版), 2007, 37(05): 1064 -1068 .
[9] Qu Zhao-wei，Chen Hong-yan，Li Zhi-hui，Hu Hong-yu，Wei Wei . 2D view reconstruction method based on single calibration pattern
[J]. 吉林大学学报(工学版), 2007, 37(05): 1159 -1163 .
[10] Nie Jian-jun，Du Fa-rong，Gao Feng . Finite time thermodynamics of real combined power cycle operating
between internal combustion engine and Stirling engine with heat leak[J]. 吉林大学学报(工学版), 2007, 37(03): 518 -0523 .
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd