吉林大学学报(工学版) ›› 2015, Vol. 45 ›› Issue (2): 420-428.doi: 10.13229/j.cnki.jdxbgxb201502013

• Orignal Article • Previous Articles     Next Articles

Impact of main parameters of accumulator on parallel hydraulic hybrid

DONG Han1,2,LIU Xin-hui1,2,WANG Xin1,2,ZHENG Bo-yuan1,2,LIANG Wei-quan1,2,WANG Jia-yi1,2   

  1. 1.State Key Laboratory of Automotive Simulation and Control, Jilin University, Changchun 130022,China;
    2.College of Mechanical Science and Engineering, Jilin University, Changchun 130022,China
  • Received:2014-02-03 Online:2015-04-01 Published:2015-04-01

RICH HTML

0   

PDF (PC)

293

Abstract: Accumulator is an energy storage device in parallel hydraulic hybrid systems, and its main parameters greatly influence the energy recovery effect. The models of the main system elements were built and simulated in AMESim software. Simulation curves were obtained under different conditions, which were used to study the effects of the main parameters on the accumulator system performance. In order to verify the simulation results, experiments were conducted on the test bench restructured on real vehicles according to the simulation results. It is shown that the experimental results are in agreement with the simulation results. The pre-charge pressure and volume size of the accumulator system have the most significant influence on energy saving. Brake energy recovery and recycling rate are inversely proportional to the speed. Pre-charge pressure has great impact on the braking distance. After the accumulator volume reaches a certain value, the changes of energy recovery and reutilization do not significantly improve further with the volume increase.

Key words: fluid power transmission and control, hydraulic hybrid, brake energy recovery, hydraulic accumulator

CLC Number: 

  • TH137
[1] Ramakrishman R, Somashekhar S, Singaperumal M. Theoretical investigations on the effect of system parameters in series hydraulic hybrid system with hydrostatic regenerative braking[J]. Journal of Mechanical Science and Technology, 2012,25(5):1321-1331.
[2] 俞剑波,何仁.混合动力电动汽车混合制动技术分析[J]. 重庆交通大学学报:自然科学版,2013, 32(4):705-711.
Yu Jian-bo, He Ren. Hybrid braking technology for hybrid electric vehicle[J]. Journal of Chongqing Jiaotong University (Natural Science), 2013,32(4):705-711.
[3] Yan Y, Liu G, Chen J. Integrated modeling and optimization of a parallel hydraulic hybrid bus[J]. International Journal of Automotive Technology, 2010,11(1):97-104.
[4] 王昕,姜继海.轮边驱动液压混合动力车辆再生制动控制策略[J]. 吉林大学学报:工学版, 2009,39(6):1544-1549.
Wang Xin, Jiang Ji-hai. Regenerative braking control strategy for wheel drive hydraulic hybrid vehicle[J]. Journal of Jilin University (Engineering and Technology Edition), 2009,39(6):1544-1549.
[5] 姜继海.汽车液驱混合动力技术[M].北京:机械工业出版社,2012.
[6] 张庆永.基于液驱混合动力车辆的蓄能器特性研究[J]. 机械科学与技术,2011,30(11):1911-1916.
Zhang Qing-yong. Study on the characteristic of hydraulic accumulator based on hydraulic hybrid vehicles[J]. Mechanical Science and Technology for Aerospace Engineering,2011, 30(11):1911-1916.
[7] 任国军,朱凤金.液压混合动力车辆中蓄能器的参数设计研究[J]. 液压与气动,2010(8):12-14.
Ren Guo-jun, Zhu Feng-jin. Research of accumulator parameter design for the hydraulic hybrid vehicle[J]. Hydraulic & Pneumatic, 2010 (8):12-14.
[8] 周翎霄,宁晓斌,谢伟东. 纯电动汽车液压再生制动能量回收系统的研究[J]. 机电工程,2013, 30(6):664-668.
Zhou Ling-xiao, Ning Xiao-bin, Xie Wei-dong. Hydraulic regenerative braking system in electrical vehicle[J]. Journal of Mechanical & Electrical Engineering, 2013,30(6):664-668.
[9] Deppen T O, Alleyne A G, Stelson K A, et al. Optimal energy use in a light weight hydraulic hybrid passenger vehicle[J]. Journal of Dynamic Systems, Measurement, and Control, 2012,134(4): 41009-41011.
[10] 衣鹏,舒涛,宋国辉.并联式液驱混合动力汽车系统建模与节油分析[J]. 佳木斯大学学报:自然科学版,2013,31(4):485-489.
Yi Peng, Shu Tao, Song Guo-hui. The modeling and fuel efficiency analysis of parallel hydraulic hybrid vehicles[J]. Journal of Jiamusi University (Natural Science Edition), 2013,31(4):485-489.
[11] 余志生.汽车理论[M].5版.北京:机械工业出版社, 2009.
[12] 马雅丽,黄志坚.蓄能器实用技术[M].北京:化学工业出版社,2007.
[13] Sun Hui, Jiang Jun-qing. Research on the system configuration and energy control strategy for parallel hydraulic hybrid loader[J]. Automation in Construction, 2010,19(2):213-220.
[14] 李翔晟,陈斗,李晓.液驱混合动力车辆动力源储能元件匹配优化研究[J].中国机械工程,2013, 24(18):2550-2555.
Li Xiang-sheng, Chen Dou, Li Xiao. Research on matching optimization of energy storage element of power of hydraulic hybrid vehicle[J].China Mechanical Engineering, 2013,24(18):2550-2555.
[1] CHU Liang, SUN Cheng-wei, GUO Jian-hua, ZHAO Di, LI Wen-hui. Evaluation method of braking energy recovery based on wheel cylinder pressure [J]. 吉林大学学报(工学版), 2018, 48(2): 349-354.
[2] ZHANG Jian, JIANG Ji-hai, LI Yan-jie. Flow characteristics of different cone valves [J]. 吉林大学学报(工学版), 2016, 46(6): 1900-1905.
[3] WU Wei, DI Chong-feng, HU Ji-bin, YUAN Shi-hua. Adaptive reverse driving system based on hydraulic transformer [J]. 吉林大学学报(工学版), 2016, 46(6): 1906-1911.
[4] WU Wei, DI Chong-feng, HU Ji-bin, YUAN Shi-hua. Static stiffness of hydraulic transformer controlled system [J]. 吉林大学学报(工学版), 2016, 46(4): 1130-1135.
[5] WANG Zhen-bao, QIN Si-cheng, MA Run-da. Thermal characteristic analysis in hydraulic transmission system of wheel loader [J]. 吉林大学学报(工学版), 2016, 46(4): 1136-1141.
[6] YUAN Zhe, ZHOU Qian-qian, LIU Chun-bao, MA Wen-xing, XU Zhi-xuan. Blade design and aerodynamics of MW wind turbine based on BEM theory [J]. 吉林大学学报(工学版), 2016, 46(4): 1142-1148.
[7] LIU Xin-hui, LI Qian-wen, CHEN Jin-shi, ZHANG Peng, NIU Ping-jie. Mathematical modeling and simulation of load-sensing priority valve [J]. 吉林大学学报(工学版), 2015, 45(6): 1817-1824.
[8] MA Wen-xing, ZHANG Yan, LEI Yu-long. Design and test of control system of hydrodynamic automotive transmission for heavy vehicle [J]. 吉林大学学报(工学版), 2015, 45(5): 1455-1460.
[9] WEI Wei1,YANG Zhi-dong,QU Zhi-yong2,HAN Jun-wei2. Internal force coupling control for hyper-redundant multi-axis hydraulic shaking table [J]. 吉林大学学报(工学版), 2015, 45(5): 1461-1467.
[10] DENG Hai-shun, HUANG Kun, WANG Chuan-li, LI Yong-mei. Overturning moment of cylinder of balanced two-ring axial piston pump [J]. 吉林大学学报(工学版), 2015, 45(5): 1468-1473.
[11] LIU Jian-fang, CHEN Hong-xia, LIU Guo-jun. Transport performance of non-contact transformation using aerostatic suspension [J]. 吉林大学学报(工学版), 2015, 45(3): 814-819.
[12] XU Tao, LIU Guang-jie, GE Hai-chao, ZHANG Wei, YU Zheng-lei. Modeling heat source of dynamic welding with local coordinate curve path [J]. 吉林大学学报(工学版), 2014, 44(6): 1704-1709.
[13] LI Fei-long, LIN Yong-gang, LI Wei, LIU Hong-wei, CUI Bao-ling. Energy hydraulic transmission system of wind turbine [J]. 吉林大学学报(工学版), 2014, 44(6): 1664-1668.
[14] DONG Han, LIU Xin-hui, WANG Xin, ZHENG Bo-yuan, LIANG Wei-quan, WANG Jia-yi. Parallel hydraulic hybrid braking regenerative characteristics [J]. 吉林大学学报(工学版), 2014, 44(6): 1655-1663.
[15] YAN Li-juan, SUN Hui, LIU Wei, JIANG Ji-hai, ZHAO Yan, HAN Jia-wei. Hydraulic hybrid technology of moving construction machinery [J]. 吉林大学学报(工学版), 2014, 44(2): 364-368.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd