吉林大学学报(工学版) ›› 2015, Vol. 45 ›› Issue (5): 1455-1460.doi: 10.13229/j.cnki.jdxbgxb201505012

Previous Articles     Next Articles

Design and test of control system of hydrodynamic automotive transmission for heavy vehicle

MA Wen-xing1, ZHANG Yan1, LEI Yu-long2   

  1. 1.College of Mechanical Science and Engineering, Jilin University, Changchun 130022, China;
    2.College of Automotive Engineering, Jilin University, Changchun 130022,China
  • Received:2014-12-24 Online:2015-09-01 Published:2015-09-01

RICH HTML

1   

PDF (PC)

488

Abstract: The hardware circuit implementation scheme of TCU of the electric control system for a certain type heavy vehicle with hydrodynamic automotive transmission was designed. In this scheme various control procedures were cured, including shift control, lockup clutch control, filling and emptying oil of hydrodynamic retarter control, shift quality control and so on. The software of the electronic control system was developed by layered and sub-module method. Automatic shift strategy with two parameters was formulated and combined with the bench test, which finally realized the functional verification. The testing results show that the designed hardware and software of the electronic control system can realize the integrated control of the automatic transmission and improve the shift quality.

Key words: fluid power transmission and control, automatic transmission, control system, experimental verification

CLC Number: 

  • TH137
[1] Liu Yong-gang, Qin Da-tong, Jiang Hong, et al. Shift control strategy and experimental validation for dry dual clutch transmissions[J]. Mechanism and Machine Theory, 2014, 75:41-53.
[2] Lei Yu-long, Li Xing-zhong, Liang Wei-peng, et al. Hydraulic system optimization and dynamic characteristic simulation of double clutch transmission[J]. Procedia Environmental Sciences, 2011,10:1065-1070.
[3] 戴振坤,刘艳芳,徐向阳,等. 液力自动变速器传动系统建模与换挡特性仿真[J]. 北京航空航天大学学报,2012,38(8):1027-1031. Dai Zhen-kun, Liu Yan-fang, Xu Xiang-yang, et al. Drive line modeling and shift characteristic simulation of automatic transmission powertrain system[J]. Journal of Beijing University of Aeronautics and Astronautics, 2012,38(8):1027-1031.
[4] 胡宇辉,席军强,陈慧岩.基于CAN总线的换挡过程控制技术[J].机械工程学报,2006,42(增刊):209-213. Hu Yu-hui, Xi Jun-qiang, Chen Hui-yan. Coordination control technology based on CAN bus in process of shifting[J]. Chinese Journal of Mechanical Engineering, 2006, 42(Sup.): 209-213.
[5] 李永军,牛铭奎,葛安林.基于CAN总线的机械式自动变速器综合控制研究[J].农业机械学报,2000,31(2):12-15. Li Yong-jun,Niu Ming-kui,Ge An-lin. Synthetic control of automated mechanical transmission based on controller area network[J].Transactions of the Chinese Society for Agricultural Machinery,2000,31(2):12-15.
[6] 吴光强,杨伟斌,秦大同.双离合器式自动变速器控制系统的关键技术[J].机械工程学报,2007,43(2):13-21. Wu Guang-qiang, Yang Wei-bin, Qin Da-tong. Key technology of dual clutch transmission control system[J]. Chinese Journal of Mechanical Engineering, 2007,43(2):13-21.
[7] 司建玉,吴光强. 双离合器自动变速器控制系统软件架构设计[J]. 同济大学学报:自然科学版,2011,39(7):1040-1044. Si Jian-yu, Wu Guang-qiang. Software architecture design of dual clutch transmission control system[J]. Journal of Tongji University (Natural Science), 2011,39(7):1040-1044.
[8] Galvagno E, Velardocchia M, Vigliani A. Dynamic and kinematic model of a dual clutch transmission[J]. Mechanism and Machine Theory, 2011, 46: 794-805.
[9] Kouroussis G, Dehombreux P, Verlinden O. Vehicle and powertrain dynamics analysis with an automatic gearbox[J]. Mechanism and Machine Theory, 2015, 83:109-124.
[10] Haj-Fraj A, Pfeiffer F. Optimal control of gear shift operations in automatic transmissions[J]. Journal of the Franklin Institute, 2001, 338(2):371-390.
[11] Ompusunggu Agusmian Partogi, Sas Paul, van Brussel Hendrik. Modeling and simulation of the engagement dynamics of a wet friction clutch system subjected to degradation: an application to condition monitoring and prognostics[J]. Mechatronics, 2013, 23(6):700-712.
[12] Cipek Mihael, Pavkovic Danijel, Petric Josko. A control-oriented simulation model of a power-split hybrid electric vehicle[J]. Applied Energy, 2013,101:121-133.
[13] Short Michael, Pont Michael J. Assessment of high-integrity embedded automotive control systems using hardware in the loop simulation[J]. The Journal of Systems and Software, 2008, 81(7):1163-1183.
[14] 刘波澜,王永庭,黄英,等. 离合器到离合器式自动变速器控制系统的试验研究[J]. 汽车工程,2009,31(4):313-316. Liu Bo-lan, Wang Yong-ting, Huang Ying, et al. An experimental study on the control system of clutch-to-clutch automatic transmission[J]. Automotive Engineering, 2009,31(4):313-316.
[15] 蔡圣栋. 液力自动变速器电子控制系统研究与开发[D]. 上海:上海交通大学电子信息与电气工程学院,2011. Cai Sheng-dong.The research and development of electronic control system of automotive transmission[D].Shanghai:School of Electronic Information and Electrical Engineering,Shanghai Jiao Tong University,2011.
[16] 张建国,雷雨龙,刘洪波,等. 干式双离合器自动变速器快速控制原型与台架试验[J]. 吉林大学学报:工学版,2010,40(4):901-905. Zhang Jian-guo, Lei Yu-long, Liu Hong-bo, et al. Rapid control prototyping of dry dual clutch transmission and platform test[J]. Journal of Jilin University(Engineering and Technology Edition), 2010,40(4):901-905.
[1] WANG De-jun, WEI Wei-li, BAO Ya-xin. Actuator fault diagnosis of ESC system considering crosswind interference [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1548-1555.
[2] GONG Xun, JIANG Bing-jing, HU Yun-feng, QU Ting, CHEN Hong. Design and analysis of nonlinear state observer for master-slave two cell Urea-SCR system of diesel engine [J]. 吉林大学学报(工学版), 2018, 48(4): 1055-1062.
[3] ZHANG Jian, JIANG Ji-hai, LI Yan-jie. Flow characteristics of different cone valves [J]. 吉林大学学报(工学版), 2016, 46(6): 1900-1905.
[4] WU Wei, DI Chong-feng, HU Ji-bin, YUAN Shi-hua. Adaptive reverse driving system based on hydraulic transformer [J]. 吉林大学学报(工学版), 2016, 46(6): 1906-1911.
[5] LIU Gang, JIN Li-qiang, CHEN Peng-fei. Vehicle traction control algorithm based on optimal slip ratio under complicated road conditions [J]. 吉林大学学报(工学版), 2016, 46(5): 1391-1398.
[6] WU Wei, DI Chong-feng, HU Ji-bin, YUAN Shi-hua. Static stiffness of hydraulic transformer controlled system [J]. 吉林大学学报(工学版), 2016, 46(4): 1130-1135.
[7] WANG Zhen-bao, QIN Si-cheng, MA Run-da. Thermal characteristic analysis in hydraulic transmission system of wheel loader [J]. 吉林大学学报(工学版), 2016, 46(4): 1136-1141.
[8] YUAN Zhe, ZHOU Qian-qian, LIU Chun-bao, MA Wen-xing, XU Zhi-xuan. Blade design and aerodynamics of MW wind turbine based on BEM theory [J]. 吉林大学学报(工学版), 2016, 46(4): 1142-1148.
[9] LIU Xin-hui, LI Qian-wen, CHEN Jin-shi, ZHANG Peng, NIU Ping-jie. Mathematical modeling and simulation of load-sensing priority valve [J]. 吉林大学学报(工学版), 2015, 45(6): 1817-1824.
[10] WANG Yan-zhong, HOU Liang-wei, LYU Qing-jun, ZHAO Xing-fu, WU Can-hui. Processing technology of face gear complex surface based on bus control [J]. 吉林大学学报(工学版), 2015, 45(6): 1836-1843.
[11] CAO Hui-chao, LI Wei. Robust fault-tolerant control for nonlinear networked control system under discrete event-triggered communication scheme [J]. 吉林大学学报(工学版), 2015, 45(6): 1895-1905.
[12] WEI Wei, DAI Ming, LI Jia-quan, MAO Da-peng, WANG Hao. Design of airborne opto-electric platform control system based on ADRC and repetitive control theory [J]. 吉林大学学报(工学版), 2015, 45(6): 1924-1932.
[13] LU Xiao-hu, YU Dong, HU Yi, YAO Zhuang. Numerical control system information integration method based on agent [J]. 吉林大学学报(工学版), 2015, 45(6): 1980-1986.
[14] WEI Wei1,YANG Zhi-dong,QU Zhi-yong2,HAN Jun-wei2. Internal force coupling control for hyper-redundant multi-axis hydraulic shaking table [J]. 吉林大学学报(工学版), 2015, 45(5): 1461-1467.
[15] DENG Hai-shun, HUANG Kun, WANG Chuan-li, LI Yong-mei. Overturning moment of cylinder of balanced two-ring axial piston pump [J]. 吉林大学学报(工学版), 2015, 45(5): 1468-1473.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd