吉林大学学报(工学版) ›› 2016, Vol. 46 ›› Issue (4): 1130-1135.doi: 10.13229/j.cnki.jdxbgxb201604018

• Orginal Article • Previous Articles     Next Articles

Static stiffness of hydraulic transformer controlled system

WU Wei, DI Chong-feng, HU Ji-bin, YUAN Shi-hua   

  1. School of Mechanical Engineering, Beijing Institute of Technology, Beijing 100081, China
  • Received:2003-09-25 Online:2016-07-20 Published:2016-07-20

RICH HTML

0   

PDF (PC)

127

Abstract: The static stiffness of the hydraulic transformer controlled system is researched. Based on the working principle of the hydraulic transformer controlled system, the system model is built. According to this system model the static stiffness models of the hydraulic transformer controlled motor and cylinder are established respectively, and the impact factors of the stiffness are analyzed. The static stiffness models of the pump controlled motor and cylinder are also deduced. Contrast experiments and simulations are carried out. Results indicate that compared to the pump controlled system, the stiffness of the hydraulic transformer controlled system is a little smaller. The static stiffness changes with the variation of the displacement of the hydraulic transformer oil port. According to the analysis, properly increasing the control angle of the hydraulic transformer is helpful to increase the pressure adjusting range of the hydraulic transformer controlled system and improve the static stiffness.

Key words: fluid power transmission and control, hydraulic transformer controlled system, static stiffness, pump controlled system, hydraulic transformer controlled angle

CLC Number: 

  • TH137
[1] Quan Zhong-yi, Quan Long, Zhang Jin-man. Review of energy efficient direct pump controlled cylinder electro-hydraulic technology[J]. Renewable and Sustainable Energy Reviews, 2014, 35: 336-346.
[2] Wang Feng, Gu Lin-yi, Chen Ying. A continuously variable hydraulic pressure converter based on high-speed on-off valves[J]. Mechatronics, 2011, 21(8):1298-1308.
[3] 姜继海,卢红影,周瑞艳,等. 液压恒压网络系统中液压变压器的发展历程[J]. 东南大学学报:自然科学版, 2006,36(5):869-874.
Jiang Ji-hai, Lu Hong-ying, Zhou Rui-yan, et al. Development of hydraulic transformer in constant pressure rail system[J]. Journal of Southeast University (Natural Science Edition), 2006, 36(5): 869-874.
[4] 卢红影,姜继海. 液压变压器四象限工作特性研究[J].哈尔滨工业大学学报,2009,41(1):62-75.
Lu Hong-ying, Jiang Ji-hai. Four-quadrant operation characteristic of hydraulic transformer[J]. Journal of Harbin Institute of Technology, 2009, 41(1): 62-75.
[5] Peter A J A, Zhao F. Valving land phenomena of the innas hydraulic transformer[J]. International Journal of Fluid Power, 2000(1): 39-47.
[6] Wei Shen, Jiang Ji-hai, Su Xiao-yu, et al. A new type of hydraulic cylinder system controlled by the new-type hydraulic transformer[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2013, 228(12): 2233-2245.
[7] 吴维,荆崇波,胡纪滨,等. 双缸体旋转斜盘式液压变压器特性分析[J]. 机械工程学报,2013,49(22):144-149.
Wu Wei, Jing Chong-bo, Hu Ji-bin, et al. Characteristics of dual-cylinder hydraulic transformer with rotatable wash plate[J]. Journal of Mechanical Engineering, 2013, 49(22): 144-149.
[8] 欧阳小平,徐兵,杨华勇. 液压变压器及其在液压系统中的节能应用[J]. 农业机械学报,2003,34(4):100-104.
Ouyang Xiao-ping, Xu Bing, Yang Hua-yong. Hydraulic transformers and its energy-saving applications in hydraulic system[J]. Transactions of the Chinese Society for Agricultural Machinery, 2003, 34(4): 100-104.
[9] 徐兵,欧阳小平,杨华勇,等. 液压变压器排量特性[J]. 机械工程学报,2006,42(5):89-90.
Xu Bing, Ouyang Xiao-ping, Yang Hua-yong, et al. Displacement of hydraulic transformer[J]. Journal of Mechanical Engineering, 2006, 42(5): 89-90.
[10] 刘成强,姜继海. 斜盘柱塞式液压变压器的扭矩特性[J]. 华南理工大学学报:自然科学版,2011,39(6):24-28.
Liu Cheng-qiang, Jiang Ji-hai. Torque characteristics of plate-inclined plunger-type hydraulic transformer[J]. Journal of South China University of Technology (Natural Science Edition), 2011, 39(6): 24-28.
[11] 马吉恩,杨华勇,徐兵,等. 液压变压器效率特性的测试与分析[J]. 浙江大学学报:工学版,2008,42(7):1231-1235.
Ma Ji-en, Yang Hua-yong, Xu Bing, et al. Test and analysis on the efficiency of hydraulic transformer[J]. Journal of Zhejiang University (Engineering Science), 2008, 42(7): 1231-1235.
[12] 刘成强,姜继海. 斜盘柱塞式液压变压器的流量特性[J]. 吉林大学学报:工学版,2012,42(1):85-90.
Liu Cheng-qiang, Jiang Ji-hai. Flow characteristic of inclined plate and axial plunger type hydraulic transformer[J]. Journal of Jilin University(Engineering and Technology Edition), 2012, 42(1): 85-90.
[13] 卢红影,姜继海,张维官,等. 基于液压恒压网络系统的液压变压器控制液压缸系统[J]. 吉林大学学报:工学版,2009,39(4):885-890.
Lu Hong-ying, Jiang Ji-hai, Zhang Wei-guan, et al. Hydraulic transformer driving hydraulic cylinder based on constant-pressure hydraulic rail system[J]. Journal of Jilin University(Engineering and Technology Edition), 2009, 39(4):885-890.
[14] 荆崇波. 旋转斜盘液压变压器特性研究[D]. 北京:北京理工大学机械与车辆学院,2010.
Jing Chong-bo. Research on characteristics of rotate-plate hydraulic transformer[D]. Beijing: School of Mechanical Engineering, Beijing Institute of Technology, 2010.
[15] 杨华勇,欧阳小平,徐兵. 液压变压器的发展现状[J]. 机械工程学报,2003,39(5):1-5.
Yang Hua-yong, Ouyang Xiao-ping, Xu Bing. Development of hydraulic transformer[J]. Journal of Mechanical Engineering, 2003, 39(5): 1-5.
[16] 王雪芝,贺尚红. 泵控马达调速液压系统的建模与仿真[J]. 长沙理工大学学报:自然科学版,2012,9(1):73-77.
Wang Xue-zhi, He Shang-hong. Modeling and simulation of pump control motor speed control system[J]. Journal of Changsha University of Science and Technology(Natural Science), 2012, 9(1): 73-77.
[17] 高强,金勇,王力,等. 泵控缸电液位置伺服系统建模研究[J]. 兵工学报,2011,32(8):950-956.
Gao Qiang, Jin Yong, Wang Li, et al. Modeling of electro-hydraulic position servo systems of pump-controlled cylinder[J]. Acta Armamentarii, 2011, 32(8):950-956.
[1] ZHANG Jian, JIANG Ji-hai, LI Yan-jie. Flow characteristics of different cone valves [J]. 吉林大学学报(工学版), 2016, 46(6): 1900-1905.
[2] WU Wei, DI Chong-feng, HU Ji-bin, YUAN Shi-hua. Adaptive reverse driving system based on hydraulic transformer [J]. 吉林大学学报(工学版), 2016, 46(6): 1906-1911.
[3] WANG Zhen-bao, QIN Si-cheng, MA Run-da. Thermal characteristic analysis in hydraulic transmission system of wheel loader [J]. 吉林大学学报(工学版), 2016, 46(4): 1136-1141.
[4] YUAN Zhe, ZHOU Qian-qian, LIU Chun-bao, MA Wen-xing, XU Zhi-xuan. Blade design and aerodynamics of MW wind turbine based on BEM theory [J]. 吉林大学学报(工学版), 2016, 46(4): 1142-1148.
[5] LIU Xin-hui, LI Qian-wen, CHEN Jin-shi, ZHANG Peng, NIU Ping-jie. Mathematical modeling and simulation of load-sensing priority valve [J]. 吉林大学学报(工学版), 2015, 45(6): 1817-1824.
[6] DENG Hai-shun, HUANG Kun, WANG Chuan-li, LI Yong-mei. Overturning moment of cylinder of balanced two-ring axial piston pump [J]. 吉林大学学报(工学版), 2015, 45(5): 1468-1473.
[7] WEI Wei1,YANG Zhi-dong,QU Zhi-yong2,HAN Jun-wei2. Internal force coupling control for hyper-redundant multi-axis hydraulic shaking table [J]. 吉林大学学报(工学版), 2015, 45(5): 1461-1467.
[8] MA Wen-xing, ZHANG Yan, LEI Yu-long. Design and test of control system of hydrodynamic automotive transmission for heavy vehicle [J]. 吉林大学学报(工学版), 2015, 45(5): 1455-1460.
[9] LIU Jian-fang, CHEN Hong-xia, LIU Guo-jun. Transport performance of non-contact transformation using aerostatic suspension [J]. 吉林大学学报(工学版), 2015, 45(3): 814-819.
[10] DONG Han,LIU Xin-hui,WANG Xin,ZHENG Bo-yuan,LIANG Wei-quan,WANG Jia-yi. Impact of main parameters of accumulator on parallel hydraulic hybrid [J]. 吉林大学学报(工学版), 2015, 45(2): 420-428.
[11] XU Tao, LIU Guang-jie, GE Hai-chao, ZHANG Wei, YU Zheng-lei. Modeling heat source of dynamic welding with local coordinate curve path [J]. 吉林大学学报(工学版), 2014, 44(6): 1704-1709.
[12] LI Fei-long, LIN Yong-gang, LI Wei, LIU Hong-wei, CUI Bao-ling. Energy hydraulic transmission system of wind turbine [J]. 吉林大学学报(工学版), 2014, 44(6): 1664-1668.
[13] TAN Yue, MA Wen-xing, LIU Chun-bao. Precision control on blades forming of stamping welded hydrodynamic torque converter [J]. 吉林大学学报(工学版), 2013, 43(增刊1): 530-534.
[14] DONG Han, LIU Xin-hui, WANG Xin, CHEN Jin-shi, WANG Jia-yi, ZHENG Bo-yuan. Energy saving performance of hydraulic hybrid system with AMESim [J]. 吉林大学学报(工学版), 2013, 43(05): 1264-1270.
[15] TAN Yue, MA Wen-xing, LU Xiu-quan. Welding strength analysis of stamping welded hydrodynamic torque converter based on fluid-solid interaction [J]. 吉林大学学报(工学版), 2013, 43(04): 928-932.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] LIU Song-shan, WANG Qing-nian, WANG Wei-hua, LIN Xin. Influence of inertial mass on damping and amplitude-frequency characteristic of regenerative suspension[J]. 吉林大学学报(工学版), 2013, 43(03): 557 -563 .
[2] CHU Liang, WANG Yan-bo, QI Fu-wei, ZHANG Yong-sheng. Control method of inlet valves for brake pressure fine regulation[J]. 吉林大学学报(工学版), 2013, 43(03): 564 -570 .
[3] LI Jing, WANG Zi-han, YU Chun-xian, HAN Zuo-yue, SUN Bo-hua. Design of control system to follow vehicle state with HIL test beach[J]. 吉林大学学报(工学版), 2013, 43(03): 577 -583 .
[4] HU Xing-jun, LI Teng-fei, WANG Jing-yu, YANG Bo, GUO Peng, LIAO Lei. Numerical simulation of the influence of rear-end panels on the wake flow field of a heavy-duty truck[J]. 吉林大学学报(工学版), 2013, 43(03): 595 -601 .
[5] WANG Tong-jian, CHEN Jin-shi, ZHAO Feng, ZHAO Qing-bo, LIU Xin-hui, YUAN Hua-shan. Mechanical-hydraulic co-simulation and experiment of full hydraulic steering systems[J]. 吉林大学学报(工学版), 2013, 43(03): 607 -612 .
[6] ZHANG Chun-qin, JIANG Gui-yan, WU Zheng-yan. Factors influencing motor vehicle travel departure time choice behavior[J]. 吉林大学学报(工学版), 2013, 43(03): 626 -632 .
[7] MA Wan-jing, XIE Han-zhou. Integrated control of main-signal and pre-signal on approach of intersection with double stop line[J]. 吉林大学学报(工学版), 2013, 43(03): 633 -639 .
[8] YU De-xin, TONG Qian, YANG Zhao-sheng, GAO Peng. Forecast model of emergency traffic evacuation time under major disaster[J]. 吉林大学学报(工学版), 2013, 43(03): 654 -658 .
[9] XIAO Yun, LEI Jun-qing, ZHANG Kun, LI Zhong-san. Fatigue stiffness degradation of prestressed concrete beam under multilevel amplitude cycle loading[J]. 吉林大学学报(工学版), 2013, 43(03): 665 -670 .
[10] XIAO Rui, DENG Zong-cai, LAN Ming-zhang, SHEN Chen-liang. Experiment research on proportions of reactive powder concrete without silica fume[J]. 吉林大学学报(工学版), 2013, 43(03): 671 -676 .
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd