吉林大学学报(工学版) ›› 2016, Vol. 46 ›› Issue (1): 120-125.doi: 10.13229/j.cnki.jdxbgxb201601018

Previous Articles     Next Articles

Spraying quality control of vehicle-mounted sprayer for liquid deicing and snow-melting agent

YAO Yun-shi1, 2, YAN Qing-qing1, 2, WANG Rui-long1, 2, SU Pei1, 2, CHEN Shi-bin1, 2, FENG Zhong-xu1, 2   

  1. 1.Highway Maintenance Equipment National Engineering Laboratory, Chang'an University, Xi'an 710064, China;
    2.Key Laboratory for Highway Construction Technology and Equipment of Ministry of Education, Chang'an University, Xi'an 710064, China
  • Received:2014-06-06 Online:2016-01-30 Published:2016-01-30

RICH HTML

0   

PDF (PC)

190

Abstract: To improve the spraying quality of vehicle-mounted sprayer for liquid deicing and snow-melting agent, the influences of the fluctuations of the vehicle speed and the agent pump speed on the spraying quality are discussed. A pump speed control system is proposed under the condition of varying vehicle speed with the help of theoretical analysis and field test. Experiment results show that, when the vehicle speed is slower than a critical value, the pump speed maintains the threshold and the actual spraying volume deviates from the target value, but there is no striped spraying defect. If the vehicle speed exceeds the critical value, the pump speed would be automatically adjusted by the control system according to the vehicle speed and the actual spraying volume is close to the target value.

Key words: road engineering, liquid deicing and snow-melting agent, sprayer, spraying quality, uniformity coefficient

CLC Number: 

  • U416.2
[1] Airey G D, Collop A C, Zoorob S E, et al. The influence of aggregate, filler and bitumen on asphalt mixture moisture damage[J]. Construction and Building Materials,2008, 22(9):2015-2024.
[2] Gürer C, Kara?ahin M, Çetin S, et al. Effects of construction-related factors on chip seal performance[J]. Construction and Building Materials, 2012, 35:605-613.
[3] Akta? B, Kara?ahin M, Saltan M, et al. Effect of aggregate surface properties on chip seal retention performance[J]. Construction and Building Materials,2013, 44: 639-644.
[4] Gransberg D D, Zaman M. Analysis of emulsion and hot asphalt cement chip seal performance[J]. Journal of Transportation Engineering, 2012, 131(3): 229-238.
[5] Gransberg D D, James D M B. Chip Seal Best Practices[M]. New York: Transportation Research Board, 2005.
[6] 顾海荣,焦生杰. 采用液压驱动行走的同步碎石封层设备[J]. 长安大学学报:自然科学版, 2007, 27(6):103-106.
Gu Hai-rong, Jiao Sheng-jie. Synchronous pavement surface dressing equipment with hydraulic traveling system[J]. Journal of Chang’an University (Natural Science Edition), 2007, 27(6):103-106.
[7] 焦生杰,刘志敏,胡丕銮. 智能型沥青洒布机洒布质量控制方案的确定[J]. 筑路机械与施工机械化, 2005, 22(2):29-31.
Jiao Sheng-jie, Liu Zhi-min, Hu Pi-luan. Determination of control schemes of spraying qualtiy for intelligent asphalt distributor [J]. Road Machinery and Construction Mechanization, 2005, 22(2): 29-31.
[8] 管欣,崔文峰,贾鑫. 车辆纵向速度分相控制[J].吉林大学学报:工学版, 2013,43(2):273-277.
Guan Xin, Cui Wen-feng, Jia Xin. Vehicle longitudinal speed split-phase control[J]. Journal of Jilin University (Engineering and Technology Edition), 2013, 43(2):273-277.
[9] 周玉才,陈士安,何仁. 车速变化对车辆平顺性的影响[J]. 长安大学学报:自然科学版,2013,33(3): 94-105.
Zhou Yu-cai, Chen Shi-an, He Ren. Influence of velocity change on ride comfort for vehicle[J]. Journal of Chang’an University (Natural Science Edition), 2013, 33(3):94-105.
[10] Urkowitz H, Kelly J G. Signal theory and random processes[J].Journal of the Acoustical Society of America, 1984, 76(2): 649-650.
[11] 玄圣夷,宋传学,靳立强,等. 基于多级鲁棒PID控制的汽车稳定性控制策略[J]. 吉林大学学报:工学版, 2010, 40(1):13-18.
Xuan Sheng-yi, Song Chuan-xue, Jin Li-qiang,et al. Multilevel robust PID control strategy for vehicle stability control[J]. Journal of Jilin University (Engineering and Technology Edition), 2010, 40(1): 13-18.
[12] Ye Jun. Adaptive control of nonlinear PID-based analog neural networks for a nonholonomic mobile robot[J]. Neurocomputing,2008,71(7-9):1561-1565.
[13] Hsu Chun-fei, Chen Guan-ming, Lee Tsu-tian. Robust intelligent tracking control with PID-type learning algorithm[J].Neurocomputing,2007,71(1-3):234-243.
[14] 范振宇,张剑飞. 公路运行车速测算模型的研究和标定[J]. 中国公路学报,2002, 15(1):107-109.
Fan Zhen-yu, Zhang Jian-fei. Analysis and calibration of the operating speed computing models on highway sections[J]. China Journal of Highway and Transport, 2002, 15(1):107-109.
[1] LI Yi,LIU Li-ping,SUN Li-jun. Prediction model on rutting equivalent temperature for asphalt pavement at different depth [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1703-1711.
[2] ZANG Guo-shuai, SUN Li-jun. Method based on inertial point for setting depth to rigid layer [J]. 吉林大学学报(工学版), 2018, 48(4): 1037-1044.
[3] NIAN Teng-fei, LI Ping, LIN Mei. Micro-morphology and gray entropy analysis of asphalt characteristics functional groups and rheological parameters under freeze-thaw cycles [J]. 吉林大学学报(工学版), 2018, 48(4): 1045-1054.
[4] GONG Ya-feng, SHEN Yang-fan, TAN Guo-jin, HAN Chun-peng, HE Yu-long. Unconfined compressive strength of fiber soil with different porosity [J]. 吉林大学学报(工学版), 2018, 48(3): 712-719.
[5] CHENG Yong-chun, BI Hai-peng, MA Gui-rong, GONG Ya-feng, TIAN Zhen-hong, LYU Ze-hua, XU Zhi-shu. Pavement performance of nano materials-basalt fiber compound modified asphalt binder [J]. 吉林大学学报(工学版), 2018, 48(2): 460-465.
[6] ZHANG Yang-peng, WEI Hai-bin, JIA Jiang-kun, CHEN Zhao. Numerical evaluation on application of roadbed with composite cold resistance layer inseasonal frozen area [J]. 吉林大学学报(工学版), 2018, 48(1): 121-126.
[7] JI Wen-yu, LI Wang-wang, GUO Min-long, WANG Jue. Experimentation and calculation methods of prestressed RPC-NC composite beam deflection [J]. 吉林大学学报(工学版), 2018, 48(1): 129-136.
[8] MA Ye, NI Ying-sheng, XU Dong, DIAO Bo. External prestressed strengthening based on analysis of spatial grid model [J]. 吉林大学学报(工学版), 2018, 48(1): 137-147.
[9] LUO Rong, ZENG Zhe, ZHANG De-run, FENG Guang-le, DONG Hua-jun. Moisture stability evaluation of asphalt mixture based on film pressure model of Wilhelmy plate method [J]. 吉林大学学报(工学版), 2017, 47(6): 1753-1759.
[10] NI Ying-sheng, MA Ye, XU Dong, LI Jin-kai. Space mesh analysis method for shear lag effect of cable-stayed bridge with corrugated steel webs [J]. 吉林大学学报(工学版), 2017, 47(5): 1453-1464.
[11] ZHENG Chuan-feng, MA Zhuang, GUO Xue-dong, ZHANG Ting, LYU Dan, Qin Yong. Coupling effect of the macro and micro characteristics of mineral powder on the low-temperature performance of asphalt mortar [J]. 吉林大学学报(工学版), 2017, 47(5): 1465-1471.
[12] YU Tian-lai, ZHENG Bin-shuang, LI Hai-sheng, TANG Ze-rui, ZHAO Yun-peng. Analyses of defects and causes of steel-plastic compound reinforced retaining wall [J]. 吉林大学学报(工学版), 2017, 47(4): 1082-1093.
[13] CAI Yang, FU Wei, TAO Ze-feng, CHEN Kang-wei. Influence analysis of geotextile on reducing traffic induced reflective cracking using extended finite element model [J]. 吉林大学学报(工学版), 2017, 47(3): 765-770.
[14] LIU Han-bing, ZHANG Hu-zhu, WANG Jing. Effect of dehydration on shear strength properties of compacted clayey soil [J]. 吉林大学学报(工学版), 2017, 47(2): 446-451.
[15] CUI Ya-nan, HAN Ji-wei, FENG Lei, LI Jia-di, WANG Le. Microstructure of asphalt under salt freezing cycles [J]. 吉林大学学报(工学版), 2017, 47(2): 452-458.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd