吉林大学学报(工学版) ›› 2018, Vol. 48 ›› Issue (2): 486-491.doi: 10.13229/j.cnki.jdxbgxb20161245

Previous Articles     Next Articles

Reasonable pre-tension research of crawler traveling gear of hydraulic excavator

LIU Han-guang1, 2, WANG Guo-qiang3, MENG Dong-ge1, ZHAO Huan-yu3   

  1. 1.Jiangsu Xuzhou Construction Machinery Research Institute, Xuzhou 221004, China;
    2.Jiangsu Xuzhou State Key Laboratory of Intelligent Manufacturing of Advanced Construction Machinery, Xuzhou 221004, China;
    3.College of Mechanical Science and Engineering, Jilin University, Changchun 130022, China
  • Received:2016-11-18 Online:2018-03-01 Published:2018-03-01

RICH HTML

0   

PDF (PC)

475

Abstract: The research focuses on the determination of reasonable pre-tension of crawler traveling gear of hydraulic excavator. The virtual prototype model of the excavator was established in the multi-body dynamics software RecurDyn. The pre-tension curves of the crawler traveling gear were obtained by experiments under three working conditions, horizontal straight, pivot steering and differential steering. Experiment results verified the accuracy of the virtual prototype model by comparing with the simulation results. By simulation analysis of three typical working conditions, horizontal straight, climbing, and pivot steering, the changes of the track tension during movement on wheel were obtained with the transformations of pre-tension of the crawler driving device. According to the judgment of the fluctuations based on the standard deviation of the tension curves, the reasonable proportional coefficient between the pre-tension and vehicle weight is received.

Key words: mechanical engineering, hydraulic excavator, virtual prototype model simulation, pre-tension

CLC Number: 

  • U469
[1] Nakanishi T,Shabana A A. Contact forces in the non-linear dynamic analysis of tracked vehicles [J]. International Journal for Numerical Methods in Engineering, 1994, 37(8):1251-1275.
[2] Nakanishi T,Shabana A A. On the numerical solution of tracked vehicle dynamic equations [J]. Nonlinear Dynamics, 1994, 6(6):391-417.
[3] Choi J H, Lee H C, ShabanaH A A. Spatial dynamics of multi-body tracked vehicles part I: spatial equations of motion [J]. Vehicle System Dynamics, 1998, 29(1):27-49.
[4] Lee H C, Choi J H, ShabanaH A A. Spatial dynamics of multi-body tracked vehicles part II: contact forces and simulation results [J]. Vehicle System Dynamics, 1998, 29(2):113-137.
[5] Huh K, Hong D. Tracktension estimation in tracked vehicles under various maneuvering tasks [J]. Journal of Dynamic Systems Measurement & Control, 2001, 123(2):179-185.
[6] Matej J. Terrain-adaptive auxiliary track tensioning system for tracked vehicles [J]. Journal of Computational & Nonlinear Dynamics, 2013, 8(3):689-698.
[7] Zhou M X, Ren Y P, Ye L, et al. Discussion oftrack tension for heavy tracked vehicles [J]. Advanced Materials Research, 2013, 813:30-33.
[1] JIA Tuo,ZHAO Ding-xuan,CUI Yu-xin. Method of rollover pre-warning for articulated loader [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1762-1769.
[2] ZANG Peng-fei, WANG Zhe, SUN Chen-le, LIN Lian-lian. Scavenging process for stable operation of linear range-extende [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1455-1465.
[3] LI Yin-wu, WU Qing-wen, CHANG Zhi-yong, YANG Cheng. Simulation and optimal design of backhoe hydraulic excavator based on bionic teeth [J]. 吉林大学学报(工学版), 2018, 48(3): 821-827.
[4] ZHA Shan-shan, GUO Yu, HUANG Shao-hua, FANG Wei-guang. Dynamic facility layout for workshop under uncertain product demands [J]. 吉林大学学报(工学版), 2017, 47(6): 1811-1821.
[5] PENG Wei, LI Guo-xiang, YAN Wei. Improvement in wall functions for engine radiators [J]. 吉林大学学报(工学版), 2017, 47(3): 804-810.
[6] TANG Zhi-gang, ZHANG Li, SHANG Hui-chao, LYU Xiao-hui, CHEN Xi, ZHENG Ren-wei. Combustion characteristics in glow-plug ignition miniature ICE and influence of residual gas [J]. 吉林大学学报(工学版), 2017, 47(3): 811-818.
[7] HAN Lin-pei, HONG Wei, SU Yan, XIE Fang-xi, CHEN Jing, DU Wen-chang. Effect of GDI engine exhaust valve secondary open on refluent EGR stratification and combustion characteristics [J]. 吉林大学学报(工学版), 2017, 47(1): 113-121.
[8] PENG Bei, GAO Yu, FENG Pei-en, QIU Qing-ying. Energy-saving technology in rotary starting process of hydraulic excavator [J]. 吉林大学学报(工学版), 2016, 46(6): 1912-1921.
[9] FU Jia-hong, YU Xiao-li, YAO Ling-yu, LIU Zhen-tao, HUANG Yu-qi. Numerical comparison of flow and heat transfer in detached cooling module for construction machinery [J]. 吉林大学学报(工学版), 2016, 46(2): 451-456.
[10] QIU Qing-ying, WEI Zhen-kai, GAO Yu, FENG Pei-en, YIN Peng-long. Fatigue analysis method of working devices of hydraulic excavator [J]. 吉林大学学报(工学版), 2016, 46(1): 159-165.
[11] TIAN Jing, LIU Zhong-chang, ZHANG Wen-jie, ZHANG Long-ping. Effect of load conditions on the performance of diesel engine under transient operation condition [J]. 吉林大学学报(工学版), 2015, 45(6): 1798-1803.
[12] LUO Hai-tao, ZHOU Wei-jia, WANG Hong-guang, WU Jia-feng. Mechanical analysis of friction stir welding robot under typical working conditions [J]. 吉林大学学报(工学版), 2015, 45(3): 884-891.
[13] GU Tian-qi, ZHANG Lei, JI Shi-jun, TAN Xiao-dan, HU Ming. Curve fitting method for closed discrete points [J]. 吉林大学学报(工学版), 2015, 45(2): 437-441.
[14] ZENG Yi-cong,XU Hai-liang,LI Feng,WU Bo. Influence of drum-shape error on combined roller bearing torque of high pressure grinding rolls [J]. 吉林大学学报(工学版), 2015, 45(2): 466-472.
[15] ZHANG Yao-juan, CHENG Kai, ZHOU Zhen-ping, ZHENG Sen, XU Xiao-long, LIU Wei-wei. Interference contact between final drive and walking system for tracked vehicle [J]. 吉林大学学报(工学版), 2014, 44(2): 369-378.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] WANG Wen-quan, SHANG Yan-geng, LI Xiu-juan, WANG Chun-sheng, ZHANG Gui-lan. Microstructure and property of laser welded 650 MPa transformation induced plasticity steel sheet[J]. , 2012, 42(05): 1203 -1207 .
[2] HUANG Jian-kang, HE Cui-cui, SHI Yu, FAN Ding. Thermodynamic analysis of Al-Fe intermetallic compounds formed by dissimilar joining of aluminum and galvanized steel[J]. 吉林大学学报(工学版), 2014, 44(4): 1037 -1041 .
[3] XU Tao, LIU Guang-jie, GE Hai-chao, ZHANG Wei, YU Zheng-lei. Modeling heat source of dynamic welding with local coordinate curve path[J]. 吉林大学学报(工学版), 2014, 44(6): 1704 -1709 .
[4] LUO Hai-tao, ZHOU Wei-jia, WANG Hong-guang, WU Jia-feng. Mechanical analysis of friction stir welding robot under typical working conditions[J]. 吉林大学学报(工学版), 2015, 45(3): 884 -891 .
[5] YANG Yue, ZHOU Lei-lei. Effect of micro-arc oxidation treatment on corrosion resistance of aluminum friction stir welding welds[J]. 吉林大学学报(工学版), 2016, 46(2): 511 -515 .
[6] LI Ming-da, KUI Hai-lin, MEN Yu-zhuo, BAO Cui-zhu. Aerodynamic drag of heavy duty vehicle with complex underbody structure[J]. 吉林大学学报(工学版), 2017, 47(3): 731 -736 .
[7] PENG Wei, LI Guo-xiang, YAN Wei. Improvement in wall functions for engine radiators[J]. 吉林大学学报(工学版), 2017, 47(3): 804 -810 .
[8] DONG Chao, CHENG Kai, HU Kang-le, HU Wen-qiang. Pitching movement performance of all terrain articulated tracked vehicles[J]. 吉林大学学报(工学版), 2017, 47(3): 827 -836 .
[9] CHU Liang, SUN Cheng-wei, GUO Jian-hua, ZHAO Di, LI Wen-hui. Evaluation method of braking energy recovery based on wheel cylinder pressure[J]. 吉林大学学报(工学版), 2018, 48(2): 349 -354 .
[10] HE Xiang-kun, JI Xue-wu, YANG Kai-ming, WU Jian, LIU Ya-hui. Tire slip control based on integrated-electro-hydraulic braking system[J]. 吉林大学学报(工学版), 2018, 48(2): 364 -372 .
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd