Journal of Jilin University(Engineering and Technology Edition) ›› 2022, Vol. 52 ›› Issue (2): 392-399.doi: 10.13229/j.cnki.jdxbgxb20211154

Previous Articles    

Fault diagnosis method of NC turret based on PSO⁃SVM and time sequence

Wei LUO1,2(),Bo LU3,Fei CHEN4(),Teng MA1,2   

  1. 1.Key Laboratory of CNC Equipment Reliability，Ministry of Education，Jilin University，Changchun 130022，China
    2.College of Mechanical and Aerospace Engineering，Jilin University，Changchun 130022，China
    3.Changchun Equipment & Technology Research Institute，Changchun 130012，China
    4.Sino-German College of Intelligent Manufacturing，Shenzhen Technology University，Shenzhen 518118，China
  • Received:2021-11-04 Online:2022-02-01 Published:2022-02-17
  • Contact: Fei CHEN E-mail:luoweicn@jlu.edu.cn;chenfei@sztu.edu.cn

RICH HTML

 1   

PDF (PC)

49

Abstract:

A fault diagnosis method of NC turret based on particle swarm optimization and support vector machine （PSO-SVM） is proposed. Firstly， the NC turret is divided into five subsystems， and a working cycle is divided into four time sequences T1， T2， T3 and T4. Secondly， the feature extraction methods of vibration， motor current， oil pressure and proximity switch signal in different time sequences of NC turret are explored. Finally， fault diagnosis method of NC turret based on PSO-SVM was proposed， and NC turret fault tests were carried out in different time sequences. According to the fault data， support vector machine （SVM） and PSO-SVM fault diagnosis methods are compared and verified. The results show that the fault diagnosis accuracy of T2， T3 and T4 are increased by 28%， 23% and 5%， respectively， which verifies the validity of the proposed fault diagnosis method. The fault diagnosis method proposed in this paper is not only suitable for NC turret， but also provides a new idea for the fault diagnosis of other complex electromechanical system.

Key words: NC turret, support vector machine, particle swarm optimization, time sequence, fault diagnosis

CLC Number: 

  • TH133.33

Fig.1

NC turret subsystem division diagram"

Fig.2

NC turret working period signal"

Fig.3

A working cycle signal of NC turret diagram"

Table 1

Key subsystem and sensitive signal table of NC turret in different sequence"

时序环节关键子系统敏感信号
T1液压子系统、发讯子系统油压信号、振动、接近开关信号
T2驱动子系统、传动子系统电流、振动
T3发讯子系统、液压子系统、辅助结构子系统油压信号、振动、接近开关信号
T4辅助结构子系统振动

Fig.4

Steps of PSO-SVM"

Fig.5

NC turret PSO-SVM fault diagnosis process diagram"

Fig.6

NC turret reliability test system"

Fig.7

Fault test in T1 and T2"

Fig.8

Fault test in T3"

Fig.9

Turret holder clamping loose test in T4"

Fig.10

Fault diagnosis results based on PSO-SVM in T1"

Fig.11

Fault diagnosis results based on PSO-SVM in T2"

Fig.12

Fault diagnosis results based on PSO-SVM in T3"

Fig.13

Fault diagnosis results based on PSO-SVM in T4"

Table 2

SVM and PSO-SVM model diagnosis results"

时序环节测试样本数SVMPSO-SVM准确率
Cγ诊断准确率/%Cγ诊断准确率/%
T12410.07100.0043.09940.01100.00
T23210.0778.1378.01006.74100.00
T33610.0777.7811.83910.0195.84
T44010.0795.0070.08000.01100.00
1 Sun B, Balakrishnan N, Chen F, et al. Reliability evaluation of the NC turret with accurate failure data and interval censored data based on EM algorithm[J]. Journal of Mechanical Science and Technology, 2020, 34(4): 1503-1513.
2 Li Chang-you, Wang Wei, Zhang Yi-min, et al. Indexing accuracy reliability sensitivity analysis of power tool turret[J]. Eksploatacja I Niezawodność, 2015, 17(1): 27-34.
3 Wang Y Q, Yam R C M, Zuo M J,et al.A comprehensive reliability allocation method for design of CNC lathes[J]. Reliability Engineering & System Safety, 2001, 72 (3): 247-252.
4 Yan C F, Li J W, Liu J. Study on CNC lathe electric turret fault diagnosis[J]. Applied Mechanics and Materials, 2012, 220-223: 381-384.
5 Yuan L, Fu F U, Li H B. CNC Lathe turret typical failure analysis and resolution[J]. Manufacturing Technology & Machine Tool, 2010(1): 128-130.
6 Su Z, Wei W, Zhang C, et al. Fault diagnosis of general turret electrically controlled system based on fuzzy neutral network optimized by genetic algorithm[C]∥IEEE 2011 10th International Conference on Electrically Mersurement Instruments, Chengdu, 2011: 275-278.
7 田致富. 基于贝叶斯网络的刀架系统故障预测[D]. 长春: 吉林大学机械与航空航天工程学院, 2020.
Tian Zhi-fu. Turret system fault prediction based on bayesian network[D]. Changchun: School of Mechanical and Aerospace Engineering, Jilin University, 2020.
8 Chen W Z, Wei H, Fei C, et al. Designing of condition monitoring system for NC turret test platform[C]∥6th International Conference on Mechanical, Automotive and Materials Engineering, Hong Kong2018: 61-65.
9 胡炜. 面向数控刀架可靠性试验的CPS研究[D]. 长春: 吉林大学机械与航空航天工程学院, 2019.
Hu Wei. Research on CPS of NC turret reliability test[D] .Changchun: School of Mechanical and Aerospace Engineering, Jilin University, 2019.
10 Basir O, Yuan X. Engine fault diagnosis based on multi-sensor information fusion using dempster-shafer evidence theory[J]. Information Fusion, 2007, 8(4): 379-386.
11 Stavropoulos P, Papacharalampopoulos A, Vasiliadis E, et al. Tool wear predictability estimation in milling based on multi-sensorial data[J]. International Journal of Advanced Manufacturing Technology, 2016, 82: 509-521.
12 Praveenkumar T, Saimurugan M, Rb H H, et al. A multi-sensor information fusion for fault diagnosis of gearbox utilizing discrete wavelet features[J]. Measurement Science & Technology, 2019, 30: 085101.
13 Saravanan N, Siddabattuni V, Ramachandran K I. A comparative study on classification of features by SVM and PSVM extracted using morlet wavelet for fault diagnosis of spur bevel gear box[J]. Expert Systems with Applications, 2008, 35(3): 1351-1366.
14 Fernández-Francos D, Martínez-Rego D, Fontenla-Romero O, et al. Automatic bearing fault diagnosis based on one-class ν -SVM[J]. Computers & Industrial Engineering, 2013, 64(1): 357-365.
15 Abbasion S, Rafsanjani A, Farshidianfar A, et al. Rolling element bearings multi-fault classification based on the wavelet denoising and support vector machine[J]. Mechanical System and Signal Processing, 2007, 21(7): 2933-2945.
16 Wang D J, Meng L, Chao L, et al. Fault diagnosis of automobile engine based on support vector machine[J]. Applied Mechanics and Materials, 2011, 80/81:1060-1064.
17 Ji Jun-jie, Qu Jian-feng, Chai Yi, et al. An algorithm for sensor fault diagnosis with EEMD-SVM[J]. Transactions of the Institute of Measurement and Control, 2018, 40(6): 1746-1756.
18 Wen Shuo, Wang Jie-sheng, Gao Jie. Fault diagnosis strategy of polymerization kettle equipment based on support vector machine and cuckoo search algorithm[J]. Engineering Letters, 2017, 25(4): EL-25-4-15.
19 Liu Z, Chen X, He Z, et al. LMD method and multi-class RWSVM of fault diagnosis for rotating machinery using condition monitoring information[J]. Sensors(Basel, Switzerland), 2013, 13(7): 8679-8694.
20 Luo S, Cheng J, Ao H L. Application of LCD-SVD technique and CRO-SVM method to fault diagnosis for roller bearing[J]. Shock and Vibration, 2015(2): 847802.
[1] Shao-jiang DONG,Peng ZHU,Xue-wu PEI,Yang LI,Xiao-lin HU. Fault diagnosis of rolling bearing under variable operating conditions based on subdomain adaptation [J]. Journal of Jilin University(Engineering and Technology Edition), 2022, 52(2): 288-295.
[2] Jin-hua WANG,Jia-wei HU,Jie CAO,Tao HUANG. Multi⁃fault diagnosis of rolling bearing based on adaptive variational modal decomposition and integrated extreme learning machine [J]. Journal of Jilin University(Engineering and Technology Edition), 2022, 52(2): 318-328.
[3] Xiao⁃lei CHEN,Yong⁃feng SUN,Ce LI,Dong⁃mei LIN. Stable anti⁃noise fault diagnosis of rolling bearing based on CNN⁃BiLSTM [J]. Journal of Jilin University(Engineering and Technology Edition), 2022, 52(2): 296-309.
[4] Long ZHANG,Tian-peng XU,Chao-bing WANG,Jian-yu YI,Can-zhuang ZHEN. Gearbox fault diagnosis baed on convolutional gated recurrent network [J]. Journal of Jilin University(Engineering and Technology Edition), 2022, 52(2): 368-376.
[5] Dan-tong OUYANG,Bi-ge ZHANG,Nai-yu TIAN,Li-ming ZHANG. Fail data reduction algorithm combining configuration checking with local search [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(6): 2144-2153.
[6] Chun-ping HOU,Chun-yue ZHAO,Zhi-peng WANG,Hai-rui TIAN. Video anomaly detection algorithm based on effective anomaly sample construction [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(5): 1823-1829.
[7] Lao-hu YUAN,Dong-shan LIAN,Liang ZHANG,Yi LIU. Fault diagnosis of key mechanical components of aircraft based on densenet and support vector machine [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(5): 1635-1641.
[8] Kang WANG,Meng YAO,Li-ben LI,Jian-qiao LI,Xiang-jin DENG,Meng ZOU,Long XUE. Mechanical performance identification for lunar soil in lunar surface sampling [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(3): 1146-1152.
[9] Wei LI,Jian CHEN,Shan-yong TAO. Method of enhancing stochastic resonance signal of self⁃adaptive coupled periodic potential system [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(3): 1091-1096.
[10] Dan-tong OUYANG,Yang LIU,Jie LIU. Fault diagnosis method based on test set under fault response guidance [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(3): 1017-1025.
[11] Feng-wen PAN,Dong-liang GONG,Ying GAO,Ming-wei XU,Bin MA. Fault diagnosis of current sensor based on linearization model of lithium ion battery [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(2): 435-441.
[12] Dao WU,Li-bin ZHANG,Yun-xiang ZHANG,Hong-ying SHAN,Hong-mei SHAN. Visual detection method for vehicle braking time sequence based on slip rate identification [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(1): 206-216.
[13] Chang-qing DU,Xi-liang CAO,Biao HE,Wei-qun REN. Parameters optimization of dual clutch transmission based on hybrid particle swarm optimization [J]. Journal of Jilin University(Engineering and Technology Edition), 2020, 50(5): 1556-1564.
[14] Fang-wu MA,Li HAN,Liang WU,Jin-hang LI,Long-fan YANG. Damping optimization of heavy⁃loaded anti⁃vibration platform based on genetic algorithm and particle swarm algorithm [J]. Journal of Jilin University(Engineering and Technology Edition), 2020, 50(5): 1608-1616.
[15] Gen-bao ZHANG,Hao LI,Yan RAN,Qiu-jin LI. A transfer learning model for bearing fault diagnosis [J]. Journal of Jilin University(Engineering and Technology Edition), 2020, 50(5): 1617-1626.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd