吉林大学学报(工学版) ›› 2013, Vol. 43 ›› Issue (05): 1302-1306.doi: 10.7964/jdxbgxb201305025

• paper • Previous Articles     Next Articles

Shape control model for three-dimensional surface part in continuous flexible forming process

SUI Zhou, CAI Zhong-yi, LAN Ying-wu, LI Ming-zhe   

  1. Roll Forging Institute, Jilin University, Changchun 130022, China
  • Received:2012-08-13 Online:2013-09-01 Published:2013-09-01

RICH HTML

0   

PDF (PC)

227

Abstract:

For given ordered data points, the Non-Uniform Rational B-spline (NURBS) interpolation technology was employed to construct the target surface and its intersection curve equations. Based on the interaction of springback effect and double curvature bending influence of sheet metal, the transverse (perpendicular to rolling direction) and longitudinal (along rolling direction) shape control models were developed. The relative positions of control units on the roll's axis and the downward displacement of upper flexible roll were obtained in continuous flexible rolling process. The combination of reverse engineering and continuous flexible forming technology was accomplished. The undetermined coefficient in the transverse shape control model was calculated by means of numerical simulation. Combining with the longitudinal shape control model, verification experiments were conducted. Results show that the final curvature was in good agreement with the target curvature.

Key words: material synthesis and processing technology, shape controlled model, downward displacement, non-uniform rational B-spline, springback effect

CLC Number: 

  • TG302

[1] Wang T, Platts M J, Levers A. A process model for shot peen forming[J]. Journal of Materials Processing Technology, 2006, 172(2):159-162.

[2] Hemmati S J, Shin J G. Estimation of flame parameters for bending process[J]. International Journal of Machine Tools & Manufacture, 2007, 47(5):799-804.

[3] 李明哲,胡志清,蔡中义,等. 自由曲面工件的连续高效塑性成形方法[J]. 吉林大学学报:工学版,2007,37(3):489-494. Li Ming-zhe, Hu Zhi-qing, Cai Zhong-yi, et al. Method of efficient continuous plastic forming for freeform surface part[J]. Journal of Jilin University (Engineering and Technology Edition), 2007, 37(3): 489-494.

[4] 胡志清,李明哲,龚学鹏. 三维曲面板类件的连续柔性成形技术研究[J]. 塑性工程学报,2008,15(1):51-54. Hu Zhi-qing, Li Ming-zhe, Gong Xue-peng. The continuous flexible method for forming the three-dimensional surface parts[J]. Journal of Plasticity Engineering, 2008, 15(1): 51-54.

[5] Cai Zhong-yi, Li Ming-zhe, Lan Ying-wu. Three-dimensional sheet metal continuous forming process based on flexible roll bending: principle and experiments[J]. Journal of Materials Processing Technology, 2012,212(1): 120-127.

[6] 蔡中义,李明哲,兰英武,等. 三维曲面零件连续成形的形状控制[J]. 吉林大学学报:工学版,2011,41(4):978-983. Cai Zhong-yi, Li Ming-zhe, Lan Ying-wu, et al. Shape control of 3-dimensional curved surface part in continuous forming[J]. Journal of Jilin University (Engineering and Technology Edition), 2011, 41(4): 978-983.

[7] 施法中. 计算机辅助几何设计与非均匀有理B样条[M]. 北京:高等教育出版社,2001.

[8] 朱心雄. 自由曲线曲面造型技术[M]. 北京:科学出版社,2000.

[9] Shim D S, Yang D Y, Kim K H, et al. Numerical and experimental investigation into cold incremental rolling of doubly curved plates for process design of a new LARS (line array roll set) rolling process[J]. CIRP Annals-Manufacturing Technology, 2009, 58(1): 239-242.

[10] Yu T X, Zhang Z L. Plastic Bending Theory and Applications[M].Singapore:World Scientific Publishing Co Pte Ltd,1996.
[1] KOU Shu-qing, SHI Zhou. Three-dimensional reconstruction of fracture-split connecting rod joint surface and its strength and stiffness [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1515-1523.
[2] WANG Hui, ZHOU Jie, XIONG Yu, TAO Ya-ping, XIANG Rong. Springback compensation for stamping part with complex surface based on reverse engineering [J]. 吉林大学学报(工学版), 2017, 47(6): 1842-1847.
[3] WANG Chun-sheng, ZOU Li, YANG Xin-hua. Analysis of fatigue life factors of aluminum alloy welded joints based on neighborhood rough set theory [J]. 吉林大学学报(工学版), 2017, 47(6): 1848-1853.
[4] LUN Feng-yan, FU Wen-zhi, LI Ming-zhe, YI Zhuo, WANG Xin-tong, CHEN Xue. Forming of flexible rolling of three-dimensional surface based on bended rolls [J]. 吉林大学学报(工学版), 2017, 47(3): 876-883.
[5] HU Kan, YU Ye, YING Liang, HU Ping, HOU Wen-bin. Optimization design of hot-stamping beam structure considering rollover crash safety of school bus [J]. 吉林大学学报(工学版), 2017, 47(3): 884-890.
[6] HU Zhi-qing,ZHEN Jiao-jiao,FENG Zeng-ming,ZHOU Shu-hong. Flexible rolling and stretch forming surface technology and numerical simulation [J]. 吉林大学学报(工学版), 2014, 44(3): 701-707.
[7] WANG Mi, CAI Zhong-yi, LI Ming-zhe, WANG Da-ming. Calculation of bending deformation of flexible roll forming for three-dimensional surface parts and numerical simulation [J]. 吉林大学学报(工学版), 2014, 44(2): 404-408.
[8] LI Ren-jun, LI Ming-zhe, XUE Peng-fei, CAI Zhong-yi, QIU Ning-jia. Method of flexible rolling for surface sheet metal [J]. 吉林大学学报(工学版), 2013, 43(06): 1529-1535.
[9] CAO Jun-hui, FU Wen-zhi, LI Ming-zhe, PENG He-li. Influence factors on dimpling in multi-point thermoforming for polymer sheet [J]. 吉林大学学报(工学版), 2013, 43(06): 1536-1540.
[10] CHEN Wei, NA Jing-xin. One step forming positive method based on deformation theory [J]. 吉林大学学报(工学版), 2013, 43(02): 358-362.
[11] HAN Qi-gang, LI Ming-zhe, FU Wen-zhi, FENG Peng-xiao. Flexible stretch-stamp forming system used for double curved sheet metal [J]. 吉林大学学报(工学版), 2012, 42(增刊1): 212-215.
[12] ZHANG Qing-fang, CAI Zhong-yi, LI Ming-zhe, ZHANG Yan. Compensation algorithm for springback in multi-point forming and its validation [J]. , 2012, (06): 1448-1452.
[13] LIU Zhi-wei, LI Ming-zhe, HAN Qi-gang. Numerical simulation on multi-point sheet metal forming with wrinkle resistance function [J]. , 2012, 42(05): 1208-1213.
[14] LIU Dong-lei, SHEN Chang-yu, LIU Chun-tai, XIN Yong, SUN Ling. Macro-effect of process parameter on waspage of rapid heat cycle molding plastic part [J]. , 2012, (03): 665-671.
[15] YU Ming, YU Sai-Ban, ZHANG Zheng-Lin, GU Zheng-Wei. Analysis of microstructure and fracture of laser welding of ultrahigh strength steel [J]. 吉林大学学报(工学版), 2010, 40(增刊): 239-0242.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] ZHU Jian-feng, LIN Yi, CHEN Xiao-kai, SHI Guo-biao. Structural topology optimization based design of automotive transmission housing structure[J]. 吉林大学学报(工学版), 2013, 43(03): 584 -589 .
[2] ZHOU Feng-dao, WANG Jin-yu, TANG Hong-zhong, ZHANG He, ZHOU Ji-yu. Multi-frequency digital drive signal generation technology in near surface electromagnetic detection domain[J]. 吉林大学学报(工学版), 2013, 43(03): 682 -687 .
[3] OUYANG Ji-hong, WANG Zhen-xin, JING Li. Expanding 9-intersection model with metric relations[J]. 吉林大学学报(工学版), 2013, 43(03): 695 -700 .
[4] GUO Tie-liang, ZHAO Dan-feng, YANG Da-wei. Efficient Doppler estimation for UWA OFDM systems[J]. 吉林大学学报(工学版), 2013, 43(03): 813 -818 .
[5] HE Yao, LIU Xing-tao, ZHANG Chen-bin, CHEN Zong-hai. Insulation detection algorithm for high-power battery system based on internal resistance model[J]. 吉林大学学报(工学版), 2013, 43(05): 1165 -1170 .
[6] LI Zhi-bin, JIN Mao-jing, LIU Pan, XU Cheng-cheng. Evaluation of impact variable speed limits on improving traffic efficiency on freeways[J]. 吉林大学学报(工学版), 2013, 43(05): 1204 -1209 .
[7] YUAN Zhe, MA Wen-xing, LIU Chun-bao, LIU Hao. Temperature field analysis of the open-type hydrodynamic retarder of heavy vehicle[J]. 吉林大学学报(工学版), 2013, 43(05): 1271 -1275 .
[8] YANG Xiao-jun, SONG Qing-song, MA Xiang, LI Dong-hai. Fault-tolerance target tracking based on multi-model information filtering[J]. 吉林大学学报(工学版), 2013, 43(05): 1381 -1385 .
[9] WU Wen, MENG Xiang-ru, LIU Yun-jiang, HUO Xing-lin. Modeling and quantification of network survivability based on continuous time Markov[J]. 吉林大学学报(工学版), 2013, 43(05): 1395 -1400 .
[10] YANG Zhao-sheng, MO Xiang-lun, YU Yao, ZHANG Biao. Estimation of travel time under abnormal state[J]. 吉林大学学报(工学版), 2013, 43(06): 1459 -1464 .
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd