吉林大学学报(工学版) ›› 2012, Vol. 42 ›› Issue (01): 74-78.

• paper • Previous Articles     Next Articles

Abrasion properties of coupling surface of bionic concave pits and nano-sized SiC/Ni composite coatings

GUO Yun-wen1,2, REN Lu-quan1, LIU Xian-li1, ZHANG Guang-cheng2, ZHANG Zhi-hui1   

  1. 1. Key Laboratory of Bionic Engineering of Ministry of Education, Jilin University, Changchun 130022, China;
    2. Changchun Institute of Engineering, Changchun 130117,China
  • Received:2011-04-27 Online:2012-01-01 Published:2012-01-01

PDF (PC)

491

Abstract:

Laser and electric deposition technologies were used to fabricate bionic coupling surfaces with concave pits morphology and nickel matrix nano-sized SiC/Ni composite coatings. The tribological properties of the bionic coupling surface were investigated by friction and abrasion experiments. Experimental results show that the wear resistance of the bionic coupling surfaces is better than the surface with composite coating only. As the wear load and time increase, the tribological mechanism of the samples transforms from plastic dominance to adhere abrasion and grain abrasion dominance.

Key words: engineering bionics, biological coupling, laser, nano-sized electric deposition, composite coating, wear property

CLC Number: 

  • TB17


[1] 任露泉,张成春,田丽梅. 仿生非光滑用于旋成体减阻的试验研究
[J]. 吉林大学学报:工学版, 2005, 35(4) : 431-436. Ren Lu-quan, Zhang Cheng-chun, Tian Li-mei. Experimental study of drag reduction for bodies of revolution using bionic non-smoothness
[J]. Journal of Jilin University(Engineering and Technology Edition) , 2005, 35(4) : 431-436.

[2] Ren L Q. Progress in the bionic study on anti-adhesion and resistance reduction of terrain machines
[J]. Sci China Ser E-Tech Sci, 2009, 52(2):273-284.

[3] 邓宝清,任露泉,苏岩,等. 模拟活塞缸套摩擦副的仿生非光滑表面的摩擦学的研究
[J].吉林大学学报:工学版, 2004, 34(1): 78-82. Deng Bao-qing, Ren Lu-quan, Su Yan, et al. Tribological study on bionically unsmoothed surface modeling piston cylinder friction pair
[J]. Journal of Jilin University (Engineering and Technology Edition), 2004, 34 (1) : 78-82.

[4] Liang Y H, Huang H, Li X J, et al.Fabrication and analysis of the multi-coupling bionic wear-resistant material
[J]. Journal of Bionic Engineering, 2010(Suppl.):24-29.

[5] Lu Y X.Significance and progress of bionics
[J].J Bionic Eng,2004,1(1):1-3.

[6] 任露泉,王再审,韩志武.仿生非光滑表面滑动摩擦磨损试验研究
[J].农业机械学报,2003,34(2):86-88. Ren L Q,Wang Z Z,Han Z W.Experimental research of sliding wear on bionic non-smooth sarface
[J].Transactions of the Chinese.Society of Agricultural Machinery,2003,34(2):86-88.

[7] 杨卓娟,韩志武,任露泉.激光处理凹坑形仿生非光滑表面试件的高温摩擦磨损特性研究
[J].摩擦学学报,2005,25(4):374-378. Yang Z J,Han Z W,Ren L Q.Friction and wear behavior of bionic non-smooth surfaces at high temperature
[J].Tribology,2005,25(4):374-378.

[8] Gyftou P,Stroumbouli M,Pavlatou E A.Tribological study of Ni matrix composite coatings containing nano and micro SiC particles
[J].Electrochimica Acta,2005,50:4544-4550.

[9] Zimmerman A F,Clark D G,Aust K T,et al.Pulse electrodeposition of Ni-SiC nanocomposite
[J].Materials Letters,2002,52:85-90.
[1] XI Peng,CONG Qian,WANG Qing-bo,GUO Hua-xi. Wear test and anti-friction mechanism analysis of bionic stripe grinding roll [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1787-1792.
[2] GUO Hao-tian,XU Tao,LIANG Xiao,YU Zheng-lei,LIU Huan,MA Long. Optimization on thermal surface with rib turbulator inspired by turbulence of alopias' gill in simplified gas turbine transition piece [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1793-1798.
[3] YU Liu, LIU Zhong-chang, LIU Jin-shan, LIU Jiang-wei, DU Hong-fei, CHENG Peng. Gasoline spray front droplet size characteristics [J]. 吉林大学学报(工学版), 2018, 48(3): 720-726.
[4] QIAN Zhi-hui, ZHOU Liang, REN Lei, REN Lu-quan. Completely passive walking machine with bionic subtalar joint and matatarsal phalangeal joint [J]. 吉林大学学报(工学版), 2018, 48(1): 205-211.
[5] YU Liu, LIU Zhong-chang, LIU Jiang-wei, DU Hong-fei, XU Yun. Gasoline direct injection engine spray droplet characteristics [J]. 吉林大学学报(工学版), 2017, 47(5): 1482-1488.
[6] YANG Xiao-hong, HANG Wen-xian, QIN Shao-gang, LIU Yong-bing, LIU Li-ping. Microstructure and wear properties of Co-based composite coatings on H13 steel surface by laser cladding [J]. 吉林大学学报(工学版), 2017, 47(3): 891-899.
[7] GE Chang-jiang, YE Hui, HU Xing-jun, YU Zheng-lei. Prediction and control of trailing edge noise on owl wings [J]. 吉林大学学报(工学版), 2016, 46(6): 1981-1986.
[8] LI Meng, SU Yi-nao, SUN You-hong, GAO Ke. High matrix bionic abnormal shape impregnated diamond bit [J]. 吉林大学学报(工学版), 2016, 46(5): 1540-1545.
[9] LIANG Yun-hong, REN Lu-quan. Preliminary study of habitat and its bionics [J]. 吉林大学学报(工学版), 2016, 46(5): 1746-1756.
[10] LIANG Yun-hong, REN Lu-quan. Preliminary study of bionics in human life [J]. 吉林大学学报(工学版), 2016, 46(4): 1373-1384.
[11] LI Chun-ling, FAN Ding, WANG Bin, YU Shu-rong. 5A06 aluminum alloy and galvanized steel butt welding-brazing by laser with preset filler powder [J]. 吉林大学学报(工学版), 2016, 46(2): 516-521.
[12] CHEN Peng-fei, TIAN Di, YANG Guang. Design and implementation of LIBS software based on MVC architecture [J]. 吉林大学学报(工学版), 2016, 46(1): 242-245.
[13] QIAN Zhi-hui, MIAO Huai-bin, REN Lei, REN Lu-quan. Lower limb joint angles of German shepherd dog during foot-ground contact in different gait patterns [J]. 吉林大学学报(工学版), 2015, 45(6): 1857-1862.
[14] ZOU Meng, YU Yong-jun, ZHANG Rong-rong, WEI Can-gang, WANG Hui-xia. Simulation analysis of energy-absorption properties of thin-wall tube based on horn structure [J]. 吉林大学学报(工学版), 2015, 45(6): 1863-1868.
[15] YANG Zhuo-juan, WANG Qing-cheng, GAO Ying, MEN Yu-zhuo, YANG Xiao-dong. Effect of different solutions on the wettability of lotus leaves [J]. 吉林大学学报(工学版), 2015, 45(6): 1869-1873.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd