吉林大学学报(工学版) ›› 2014, Vol. 44 ›› Issue (5): 1247-1252.doi: 10.7964/jdxbgxb201405004

Previous Articles     Next Articles

Key technology of the electric-hydraulic system for continuous variable transmission

HAN Ling1, ZHANG Lin-bin1, AN Ying2, LI Chun-rong3,Sohel Anwar4   

  1. 1.College of Transportation, Jilin University, Changchun 130022, China;
    2.College of Automotive Engineering, Hu'
    nan University, Changsha 410000, China;
    3.College of Mechanical Engineering, Jilin Agriculture University, Changchun 130000, China ;
    4.College of Mechanical Engineering, Purdue University, Indiana 46202, USA
  • Received:2013-09-22 Online:2014-09-01 Published:2014-09-01

RICH HTML

0   

PDF (PC)

848

Abstract:

The control consistency of Drive-Neutral-Reverse (DNR) clutch in the software development of the electric-hydraulic control system of Continuous Variable Transmission (CVT) is analyzed. The parameter diversity, uncertainty, and time-varying introduce difficulties to the open-loop control of DNR clutch. Regarding the filling time and the slipping process, a self-learning method is proposed, which takes the smooth turbine acceleration as the target. The learning rule is derived from the Lyapunov argument. The asymptotic convergence of the self-learning process is theoretically proved. To verify the effectiveness of the learning control algorithm in practical application, the control algorithm modeling is set up in the ETAS software, and the control algorithm is tested using rapid prototype simulation on real vehicle. The test results indicate that application effect of the control method is good.

Key words: vehicle engineering, continuously variable transmission(CVT), electric-hydraulic control system, DNR clutch

CLC Number: 

  • U472.9
[1] 高帅.无级变速器电液控制系统开发及关键技术研究[D].长春:吉林大学汽车学院,2012.Gao Shuai. Development of the electric-hydraulic system for continuously variable transmission and research on the key technology[D].Changchun:Automotive Engineering, Jilin University,2012.
[2] 杨凯.金属带式CVT夹紧力控制及液压控制系统的仿真分析[D].长沙:湖南大学汽车工程学院,2012.Yang Kai. The clamping force control and simulation analysis of hydraulic control system about Metal-Belt type CVT[D].Changsha: College of Automotive Engineering,Hu'nan University,2012.
[3] 张伯英.金属带式无级变速传动机理与控制的研究[D].长春:吉林大学汽车学院,2002.Zhang Bo-ying.Study mechanism and control of metal belt continuously variable transmission[D].Changchun: Automotive Engineering,Jilin University,2002.
[4] 卢延辉,张友坤,郑联珠,等.基于Infenion C164CI的金属带式无级变速器电控系统设计[J] .吉林大学学报:工学版,2006,36(增刊):84-88.Lu Yan-hui, Zhang You-kun, Zheng Lian-zhu,et al. Design of electronic control unit on infenion C164CI for metal belt continuously variable transmission[J]. Journal of Jilin University(Engineering and Technology Edition), 2006,36(Sup.):84-88.
[5] 张宝生,付铁军,周云山,等.金属带式无级变速传动系统与发动机的匹配及其控制策略[J].吉林大学学报:工学版,2004,34(1):65-70.Zhang Bao-sheng, Fu Tie-jun,Zhou Yun-shan,et al. Matching of V-belt type continuously variable transmission with engine and its control strategy[J].Journal of Jilin University (Engineering and Technology Edition),2004,34(1):65-70.
[6] 周萍,聂晋,孙跃东. 基于模糊PID控制的CVT速比仿真研究[J]. 机械传动,2011(8):25-28.Zhou Ping, Nie Jin, Sun Yue-dong. Simulation study of CVT speed ratio based on fuzzy-PID control theory[J] .Journal of Mechanical Transmission, 2011(8):25-28.
[7] Togai K, Tamaki H. Human driving behavior analysis and model representation with expertise acquiring process for controller rapid prototyping[C]∥SAE Technical Paper, 2011-01-0051.
[8] Prasad M, Sardar A, Mubashir S. Transmission technologies : an Indian perspective[C]∥SAE Technical Paper, 2011-26-0083.
[9] Manyala J. Gearshift actuator dynamics predictions in a dual clutch transmission[J]. SAE Int J Commer Veh,2013, 6(2):589-597.
[10] Kamijo S, Tomomatsu H, Sawada M, et al. Development of iQ with CVT for USA[J].SAE Int J Engines, 2011, 4(1):2142-2147.
[1] CHANG Cheng,SONG Chuan-xue,ZHANG Ya-ge,SHAO Yu-long,ZHOU Fang. Minimizing inverter capacity of doubly-fed machine driving electric vehicles [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1629-1635.
[2] XI Li-he,ZHANG Xin,SUN Chuan-yang,WANG Ze-xing,JIANG Tao. Adaptive energy management strategy for extended range electric vehicle [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1636-1644.
[3] HE Ren,YANG Liu,HU Dong-hai. Design and analysis of refrigeration system supplied by solar auxiliary power of refrigerator car [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1645-1652.
[4] NA Jing-xin,MU Wen-long,FAN Yi-sa,TAN Wei,YANG Jia-zhou. Effect of hygrothermal aging on steel-aluminum adhesive joints for automotive applications [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1653-1660.
[5] LIU Yu-mei,LIU Li,CAO Xiao-ning,XIONG Ming-ye,ZHUANG Jiao-jiao. Construction on collision avoidance model of bogie dynamic simulation test bench [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1661-1668.
[6] ZHAO Wei-qiang, GAO Ke, WANG Wen-bin. Prevention of instability control of commercial vehicle based on electric-hydraulic coupling steering system [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1305-1312.
[7] SONG Da-feng, WU Xi-tao, ZENG Xiao-hua, YANG Nan-nan, LI Wen-yuan. Life cycle cost analysis of mild hybrid heavy truck based on theoretical fuel consumption model [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1313-1323.
[8] ZHU Jian-feng, ZHANG Jun-yuan, CHEN Xiao-kai, HONG Guang-hui, SONG Zheng-chao, CAO Jie. Design modification for automotive body structure based on seat pull safety performance [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1324-1330.
[9] NA Jing-xin, PU Lei-xin, FAN Yi-sa, SHEN Chuan-liang. Effect of temperature and humidity on the failure strength of Sikaflex-265 aluminum adhesive joints [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1331-1338.
[10] WANG Yan, GAO Qing, WANG Guo-hua, ZHANG Tian-shi, YUAN Meng. Simulation of mixed inner air-flow integrated thermal management with temperature uniformity of Li-ion battery [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1339-1348.
[11] JIN Li-sheng, XIE Xian-yi, GAO Lin-lin, GUO Bai-cang. Distributed electric vehicle stability control based on quadratic programming [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1349-1359.
[12] KUI Hai-lin, BAO Cui-zhu, LI Hong-xue, LI Ming-da. Idling time prediction method based on least square support vector machine [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1360-1365.
[13] WANG De-jun, WEI Wei-li, BAO Ya-xin. Actuator fault diagnosis of ESC system considering crosswind interference [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1548-1555.
[14] HU Man-jiang, LUO Yu-gong, CHEN Long, LI Ke-qiang. Vehicle mass estimation based on longitudinal frequency response characteristics [J]. 吉林大学学报(工学版), 2018, 48(4): 977-983.
[15] LIU Guo-zheng, SHI Wen-ku, Chen Zhi-yong. Finite element analysis of transmission error for hypoid gears considering installation error [J]. 吉林大学学报(工学版), 2018, 48(4): 984-989.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd