吉林大学学报(工学版) ›› 2015, Vol. 45 ›› Issue (6): 1743-1750.doi: 10.13229/j.cnki.jdxbgxb201506002

Previous Articles     Next Articles

Energy management strategy of plug-in hybridelectric system based on driving intention

QIN Da-tong, YANG Guan-long, HU Ming-hui, LIU Yong-gang, LIN Yu-pei   

  1. The State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing 400044,China
  • Received:2014-04-04 Online:2015-11-01 Published:2015-11-01

Abstract:

In order to obtain good energy consumption economy for Plug-in Hybrid Electric Vehicle (PHEV) and reasonably distribute battery power under different driving condition, a fuzzy inference controller is used to identify the driver's intention. The working mode is partitioned according to the hybrid system dynamic coupling mode, the State of Charge (SOC) of the battery and the engine working characteristic curve. Then, instantaneous optimization method is used to distribute engine and motor torque, in which the energy consumption economy is taken as the objective function. Finally, the energy management strategy based on driving intention is proposed. A vehicle model is built on the Matlab/Simulink platform, and simulated under New European Driving Cycle (NEDC) condition. Simulation results indicate that the proposed strategy can realize the optimization control of the engine and ISG motor and keep the engine operation points within the peak efficiency region. The fuel consumption per 100 km is saved by 8.24% in comparison with the energy management strategy of the charge depleting and charge sustaining mode. In order to further verify the proposed energy management strategy, vehicle road test is conducted, and results show that the fuel consumption per 100 km is reduced by 32.93% compared with prototype gasoline vehicle.

Key words: vehicle engineering, plug-in hybrid electric vehicle, driving intention, energy management strategy, fuel consumption per hundred kilometers

CLC Number: 

  • U461.8
[1] Chen Z, Ardalan V. Route preview in energy management of plug-in hybrid vehicles[J]. IEEE Transactions on Control Systems Technology, 2012,20(2):546-553.
[2] 崔纳新,步刚,吴剑,等. Plug-In并联式混合动力汽车实时优化能量管理策略[J].电工技术学报,2011,26(11):155-160.
Cui Na-xin, Bu Gang, Wu Jian, et al. Real-Time optimiztion of energy management stragegy for plug-in parallel hybrid electric vehicles[J]. Transactions of China Electrotechnical Society,2011,26(11):155-160.
[3] He Y M, Chowdhury M, Pisu P, et al. An energy optimization strategy for power-split drivetrain plug-in hybrid electric vehicles[J]. Transportation Research Part C:Emerging Technologies,2012,22:29-41.
[4] Khayyer P, Wollaeger J, Onori S, et al. Analysis of impact factors plug-in hybrid electric vehicles[C]∥2012 15th International IEEE Conference on Intelligent Transportation Systems: Alaska,2012:1061-1066.
[5] Geng B, Mills J K, Sun D. Two-stage energy management control of fuel cell plug-In hybrid electric vehicles considering fuel cell longevity[J]. IEEE Transactions on Vehicular Technology,2012,61(2):498-508.
[6] 张博,郑贺悦,王成. 可外接充电混合动力汽车能量管理策略[J].机械工程学报,2011,47(6):113-119.
Zhang Bo, Zheng He-yue, Wang cheng. Plug-in hybrid electric vehicle energy management strategy[J]. Journal of Mechanical Engineering,2011,47(6):113-119.
[7] Gong Qiu-ming, Li Yao-yu, Peng Zhong-ren. Trip-based optimal power management of plug-In hybrid electric vehicle[J]. IEEE Transactions on Vehicular Technology,2008,57(6):3393-3401.
[8] Moura S, Callaway D, Fathy H, et al. Tradeoffs between battery energy capacity and stochastic optimal power management in plug-in hybrid electric vehicles[J]. Journal of Power Sources,2010,195(9):2979-2988.
[9] Moura S, Fathy H, Callaway D, et al. A stochastic optimal control approach for power management in plug-In hybrid electric vehicles[J]. IEEE Transaction on Control Systems Technology, 2011,19(3):545-555.
[10] Shams-Zahraei M, Kouzani A, Kutter S, et al. Integrated thermal and energy management of plug-in hybrid electric vehicles[J]. Journal of Power Sources,2012,216:237-248.
[11] Kim N,Cha S,Peng H. Optimal control of hybrid electric vehicles based on pontryagin's minimum principle[J]. IEEE Transactions on Control System Technology,2011,19(5):1279-1287.
[12] Banvait H, Anwar S,Chen Y B. A rule based energy management strategy for plug-in hybrid electric vehicle[C]∥IEEE American Control Conference,St.Louis,2009:3938-3943.
[13] 张志,杨芸芸. 插电式混合动力SUV车控制策略研究[J]. 武汉理工大学学报:信息与管理工程版,2012,34(2):181-185.
Zhang Zhi, Yang Yun-yun. Energy management strategy of plug-in hybrid electric SUV[J]. Journal of WUT (Information & Management Engineering),2012,34(2):181-185.
[14] 罗国鹏,罗禹贡,李克强. 基于最佳电能使用的插电式混合动力客车控制策略[J].汽车工程,2012,34(6):475-478.
Luo Guo-peng,Luo Yu-gong,Li Ke-qiang. Control strategy for Plug-In hybrid electric bus based on optimal electric energy use[J]. Automotive Engineering,2012,34(6):475-478.
[15] 周能辉,赵春明,辛明华,等. 插电式混合动力轿车整车控制策略的研究[J].汽车工程,2013,35(2):99-104.
Zhou Neng-hui,Zhao Chun-ming,Xin Ming-hua,et al. A research on the vehicle control strategy of a plug-in hybrid electric car[J]. Automotive Engineering,2013,35(2):99-104.
[1] CHANG Cheng,SONG Chuan-xue,ZHANG Ya-ge,SHAO Yu-long,ZHOU Fang. Minimizing inverter capacity of doubly-fed machine driving electric vehicles [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1629-1635.
[2] XI Li-he,ZHANG Xin,SUN Chuan-yang,WANG Ze-xing,JIANG Tao. Adaptive energy management strategy for extended range electric vehicle [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1636-1644.
[3] HE Ren,YANG Liu,HU Dong-hai. Design and analysis of refrigeration system supplied by solar auxiliary power of refrigerator car [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1645-1652.
[4] NA Jing-xin,MU Wen-long,FAN Yi-sa,TAN Wei,YANG Jia-zhou. Effect of hygrothermal aging on steel-aluminum adhesive joints for automotive applications [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1653-1660.
[5] LIU Yu-mei,LIU Li,CAO Xiao-ning,XIONG Ming-ye,ZHUANG Jiao-jiao. Construction on collision avoidance model of bogie dynamic simulation test bench [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1661-1668.
[6] ZHAO Wei-qiang, GAO Ke, WANG Wen-bin. Prevention of instability control of commercial vehicle based on electric-hydraulic coupling steering system [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1305-1312.
[7] SONG Da-feng, WU Xi-tao, ZENG Xiao-hua, YANG Nan-nan, LI Wen-yuan. Life cycle cost analysis of mild hybrid heavy truck based on theoretical fuel consumption model [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1313-1323.
[8] ZHU Jian-feng, ZHANG Jun-yuan, CHEN Xiao-kai, HONG Guang-hui, SONG Zheng-chao, CAO Jie. Design modification for automotive body structure based on seat pull safety performance [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1324-1330.
[9] NA Jing-xin, PU Lei-xin, FAN Yi-sa, SHEN Chuan-liang. Effect of temperature and humidity on the failure strength of Sikaflex-265 aluminum adhesive joints [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1331-1338.
[10] WANG Yan, GAO Qing, WANG Guo-hua, ZHANG Tian-shi, YUAN Meng. Simulation of mixed inner air-flow integrated thermal management with temperature uniformity of Li-ion battery [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1339-1348.
[11] JIN Li-sheng, XIE Xian-yi, GAO Lin-lin, GUO Bai-cang. Distributed electric vehicle stability control based on quadratic programming [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1349-1359.
[12] KUI Hai-lin, BAO Cui-zhu, LI Hong-xue, LI Ming-da. Idling time prediction method based on least square support vector machine [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1360-1365.
[13] WANG De-jun, WEI Wei-li, BAO Ya-xin. Actuator fault diagnosis of ESC system considering crosswind interference [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1548-1555.
[14] HU Man-jiang, LUO Yu-gong, CHEN Long, LI Ke-qiang. Vehicle mass estimation based on longitudinal frequency response characteristics [J]. 吉林大学学报(工学版), 2018, 48(4): 977-983.
[15] LIU Guo-zheng, SHI Wen-ku, Chen Zhi-yong. Finite element analysis of transmission error for hypoid gears considering installation error [J]. 吉林大学学报(工学版), 2018, 48(4): 984-989.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!