吉林大学学报(工学版) ›› 2015, Vol. 45 ›› Issue (6): 1831-1835.doi: 10.13229/j.cnki.jdxbgxb201506015
Previous Articles Next Articles
WANG Zhi
CLC Number:
| [1] 张景旭. 大型跟瞄架方位轴系的研制[J]. 光学精密工程,1996,4(2):73-77. Zhang Jing-xu. Development of vertical axial system for large tracking and pointing mount[J]. Optics and Precision Engineering,1996,4(2):73-77. [2] 田学光,田兴志,刘轩,等. 大型精密转台高精度角度微驱动装置研制[J]. 光学精密工程, 2010,18(5):1112-1118. Tian Xue-guang, Tian Xing-zhi,Liu Xuan, et al. Development of angular micro driving device for large-scale and high accurate turntable[J]. Optics and Precision Engineering,2010,18(5):1112-1118. [3] 韩德一,梁波. 惯性平台轴承预紧力及其刚度的计算分析[J]. 中国惯性技术学报,1998,6(4):39-43. Han De-yi, Liang Bo. Analysis and computation on the preloaded force and stiffness of bearing fixed in the inertial platform[J]. Journal of Chinese Inertial Technology,1998,6(4):39-43. [4] 王智, 李朝辉. 月基极紫外相机光机结构设计[J].光学精密工程,2011,19(10):2427-2433. Wang Zhi, Li Zhao-hui. Optical-mechanical structure design for lunar-based extreme ultraviolet camera[J]. Optics and Precision Engineering, 2011,19(10):2427-2433. [5] 李朝辉,陈波. 月基对地观测跟踪转台设计与分析[J]. 光子学报,2010,39(12):2215-2219. Li Zhao-hui, Chen Bo. Development of lunar pointing mounts for imaging to the earth[J]. Acta Photonica Sinica,2010,39(12):2215-2219. [6] 李为民,王海涛. 轴向定位预紧轴承刚度计算[J]. 河北工业大学学报,2001,30(2):15-19. Li Wei-min, Wang Hai-tao. Rigidity calculation of axial position preload bearings[J]. Journal of Hebei University of Technology,2001,30(2):15-19. [7] 方兵,张雷,曲兴田,等. 角接触球轴承刚度理论计算与实验[J]. 吉林大学学报:工学版,2012,42(4):840-844. Fang Bing,Zhang Lei,Qu Xing-tian, et al. Theoretical and experimental research of stiffness of angular contact ball bearing[J]. Journal of Jilin University(Engineering and Technology Edition),2012,42(4):840-844. [8] 郭向东,王燕霜. 轴承预紧力-系统固有频率及跨距关系的研究[J]. 轴承,2013(4):30-33. Guo Xiang-dong,Wang Yan-shuang.Research on relationship among bearing preload,system natural frequency and span[J].Bearing,2013(4):30-33. [9] Shan Xiao-biao,Xie Tao,Chen Wei-shan. Novel approach for determining the optimal axial preload of a simulating rotary table spindle system[J]. Journal of Zhejiang University Science A,2007,8(5):812-817. |
| [1] | BI Qiu-shi,WANG Guo-qiang,HUANG Ting-ting,MAO Rui,LU Yan-peng. Tooth strength analysis of mineral sizer by coupling discrete element method and finite element method [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1770-1776. |
| [2] | ZHU Wei,WANG Chuan-wei,GU Kai-rong,SHEN Hui-ping,XU Ke,WANG Yuan. Stiffness and dynamics analysis of a new type of tensegrity parallel mechanism [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1777-1786. |
| [3] | LIU Jian-fang, WANG Ji-bo, LIU Guo-jun, LI Xin-bo, LIANG Shi-hai, YANG Zhi-gang. PMMA micromixer embedded with 3D channel based on piezoelectric actuation [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1500-1507. |
| [4] | MAO Yu-ze, WANG Li-qin. Influence of squirrel-cage flexible support on the dynamic performance of ball bearing [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1508-1514. |
| [5] | WANG Tao, SAN Xiao-gang, GAO Shi-jie, WANG Hui-xian, WANG Jing, NI Ying-xue. Dynamic characteristics of vertical shaft system of photoelectric turntable [J]. 吉林大学学报(工学版), 2018, 48(4): 1099-1105. |
| [6] | HE Ji-lin, CHEN Yi-long, WU Kang, ZHAO Yu-ming, WANG Zhi-jie, CHEN Zhi-wei. Energy flow analysis of crane hoisting system and experiment of potential energy recovery system [J]. 吉林大学学报(工学版), 2018, 48(4): 1106-1113. |
| [7] | XIE Chuan-liu, TANG Fang-ping, SUN Dan-dan, ZHANG Wen-peng, XIA Ye, DUAN Xiao-hui. Model experimental analysis of pressure pulsation in vertical mixed-flow pump system [J]. 吉林大学学报(工学版), 2018, 48(4): 1114-1123. |
| [8] | SUN Xiu-rong, DONG Shi-min, WANG Hong-bo, LI Wei-cheng, SUN Liang. Comparison of multistage simulation models of entire sucker rod with spatial buckling in tubing [J]. 吉林大学学报(工学版), 2018, 48(4): 1124-1132. |
| [9] | YOSHINO Tatsuo, FAN Lu-lu, YAN Lei, XU Tao, LIN Ye, GUO Gui-kai. Multiobjective optimization design for dummy chest structure based on MBNWS algorithm [J]. 吉林大学学报(工学版), 2018, 48(4): 1133-1139. |
| [10] | LIU Kun, LIU Yong, YAN Jian-chao, JI Shuo, SUN Zhen-yuan, XU Hong-wei. Dynamic analysis of sit-to-stand human motion based on in vitro-sensor detection [J]. 吉林大学学报(工学版), 2018, 48(4): 1140-1146. |
| [11] | SUN Zheng, HUANG Yu-qi, YU Xiao-li. Numerical simulation of flow and heat transfer in journal bearing lubrication [J]. 吉林大学学报(工学版), 2018, 48(3): 744-751. |
| [12] | LIU Zhi-feng, ZHAO Dai-hong, WANG Yu-mo, HUN Lian-ming, ZHAO Yong-sheng, DONG Xiang-min. Relationship between bearing capacity of heavy machine hydrostatic rotary table and temperature field distribution of oil pad [J]. 吉林大学学报(工学版), 2018, 48(3): 773-780. |
| [13] | CAO Jing-hua, KONG Fan-sen, RAN Yan-zhong, SONG Rui-chen. Back pressure controller design of air compressor based on fuzzy self-adaptive PID control [J]. 吉林大学学报(工学版), 2018, 48(3): 781-786. |
| [14] | LI Rui, ZHANG Lu-yang, LIU Lin, WU Yue-yuan, CHEN Shi-wei. Magneto-rheological vibration isolation for three-span bridge based on similarity theory [J]. 吉林大学学报(工学版), 2018, 48(3): 787-795. |
| [15] | TIAN Yan-tao, ZHANG Yu, WANG Xiao-yu, CHEN Hua. Estimation of side-slip angle of electric vehicle based on square-root unscented Kalman filter algorithm [J]. 吉林大学学报(工学版), 2018, 48(3): 845-852. |
|
||