Journal of Jilin University(Engineering and Technology Edition) ›› 2018, Vol. 48 ›› Issue (5): 1500-1507.doi: 10.13229/j.cnki.jdxbgxb20170868

Previous Articles     Next Articles

PMMA micromixer embedded with 3D channel based on piezoelectric actuation

LIU Jian-fang1, WANG Ji-bo1, LIU Guo-jun1, LI Xin-bo2, LIANG Shi-hai1, YANG Zhi-gang1   

  1. 1.College of Mechanical Science and Engineering, Jilin University, Changchun 130022, China;
    2.College of Communication Engineering, Jilin University, Changchun 130022, China
  • Received:2017-08-18 Online:2018-09-20 Published:2018-12-11

Abstract: To improve the mixing effect of the fluids under micro scale condition and the mixing efficiency of micromixer, a novel PMMA micromixer embedded with 3D channel based piezoelectric actuation was developed. The micromixer uses PZT micropump with double chambers in series as the driving source, and is embedded with Y type mixing channel and 3D multi-corner spiral flow channel. The micromixer is manufactured by PMMA bonding process under certain temperature and pressure condition. The related structural parameters are optimized using the CAE software. The final optimized dimensions are 50 mm × 35 mm × 7.2 mm. The pulsating and mixing effect experiments were carried out in the laboratory. Results show that when the frequency is 50 Hz and the output flow rate is about 1 mL/min, the pulsation effect of mixing fluids is obvious in the flow channel. The pulsation mixing technique and the multi-corner flow channel structure improve the mixing effect, which is a novel micro mixing technology that combines with the characteristics of active and passive micromixers.

Key words: hydraulic transmission and control, mechanical design, piezoelectric actuation, 3D flow channel, PMMA bonding process, micromixer, PZT micropump

CLC Number: 

  • TN384
[1] Dittrich P S, Manz A.Lab-on-a-chip: microfluidics in drug discovery[J]. Nature Reviews Drug Discovery, 2006, 5(3):210-218.
[2] Sista R, Hua Z, Thwar P, et al.Development of a digital microfluidic platform for point of care testing[J].Lab on a Chip, 2008, 8(12):2091-2104.
[3] Boken J,Soni S K,Kumar D.Microfluidic synthesis of nanoparticles and their biosensing applications[J].Critical Reviews in Analytical Chemistry,2016,46(6):538-561.
[4] Fallenius B E G, Sattari A, Fransson J H M,et al. Experimental study on the effect of pulsating inflow to an enclosure for improved mixing[J].International Journal of Heat & Fluid Flow, 2013, 44:108-119.
[5] 赵天,杨志刚,刘建芳,等.利用压电微泵驱动和脉动混合可控合成金纳米粒子[J].光学精密工程, 2014, 22(4):904-910.
Zhao Tian, Yang Zhi-gang, Liu Jian-fang, et al.Controlled synthesis of gold nanoparticles based on PZT micropump and pulsating mixing[J].Optics and Precision Engineering,2014, 22(4):904-910.
[6] Shilton R J, Yeo L Y, Friend J R.Quantification of surface acoustic wave induced chaotic mixing-flows in microfluidic wells[J].Sensors & Actuators B Chemical, 2011, 160(1):1565-1572.
[7] Choi E, Kwon K, Lee S J, et al.Non-equilibrium electrokinetic micromixer with 3D nanochannel networks[J]. Lab on a Chip, 2015, 15(8):1794-1798.
[8] Kamali R, Shekoohi S A, Binesh A.Effects of magnetic particles entrance arrangements on mixing efficiency of a magnetic bead micromixe[J]. Nano-Micro Letters, 2014, 6(1):30-37.
[9] Sadabadi H, Packirisamy M, Wüthrich R.High performance cascaded PDMS micro-mixer based on split-and-recombination flows for lab-on-a-chip applications[J].RSC Advances, 2013, 3(20):7296-7305.
[10] 何秀华, 颜杰, 王岩. 内置周期挡板的T-型微混合器[J].光学精密工程,2015, 23(10):2877-2886.
He Xiu-hua, Yan Jie, Wang Yan.T-shaped micromixer with periodic baffles[J]. Optics and Precision Engineering,2015,23(10): 2877-2886.
[11] 张贺, 刘晓为, 唐佳禄,等.三维阶梯结构微混合器设计、制作及性能分析[J].哈尔滨工业大学学报, 2016, 48(4):54-59.
Zhang He,Liu Xiao-wei, Tang Jia-lu, et al.Design, manufacture and investigation of 3D step structures micromixe[J]. Journal of Harbin Institute of Technology, 2016, 48(4):54-59.
[12] Hong T F, Ju W J, Wu M C, et al.Rapid prototyping of PMMA microfluidic chips utilizing a CO2, lase[J]. Microfluidics and Nanofluidics, 2010, 9(6):1125-1133.
[13] Dy A J, Cosmanescu A, Sluka J, et al.Fabricating microfluidic valve master molds in SU-8 photoresist[J]. Journal of Micro-mechanics & Micro-engineering, 2014, 24(5): 057001.
[14] Zeng P, Li L, Dong J, et al.Structure design and experimental study on single-bimorph double-acting check-valve piezoelectric pump[C]∥ARCHIVE Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science. DOI: 10.1177/0954406215596357.
[15] Ren Y J, Ma Y T, Huang D, et al.Elastic string check valves can efficiently heighten the piezoelectric pump’s working frequency[J].Sensors & Actuators A Physical, 2016, 244:126-132.
[16] 曾平, 李立安, 胥锋, 等. 无阀压电泵的流固耦合仿真及试验验证[J]. 光学精密工程, 2016, 24(1): 112-118.
Zeng Ping, Li Li-an, Xu Feng, et al.Structural-fluid coupling simulation and experimental verification on valveless piezoelectric pump[J]. Optics and Precision Engineering, 2016, 24(1): 112-118.
[17] 陈松, 刘勇, 阚君武,等. 微型压电泵中腔高对气泡滞留的影响规律[J]. 光学精密工程, 2017, 25(3): 672-679.
Chen Song, Liu Yong, Kan Jun-wu, et al.Influence of pump-chamber height on bubble retention in piezoelectric micro-pump[J]. Optics and Precision Engineering, 2017, 25(3): 672-679.
[18] Shin S M, Kang I S, Cho Y.Mixing enhancement by using electrokinetic instability under time-periodic electric field[J].Journal of Micro-mechanics & Micro-engineering, 2005, 15(3):455-462.
[19] Beebe D J, Adrian R J, Olsen M G, et al.Passive mixing in microchannels:fabrication and flow experiments[J]. Mécanique & Industries, 2001, 2(4):343-348.
[1] BI Qiu-shi,WANG Guo-qiang,HUANG Ting-ting,MAO Rui,LU Yan-peng. Tooth strength analysis of mineral sizer by coupling discrete element method and finite element method [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1770-1776.
[2] ZHU Wei,WANG Chuan-wei,GU Kai-rong,SHEN Hui-ping,XU Ke,WANG Yuan. Stiffness and dynamics analysis of a new type of tensegrity parallel mechanism [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1777-1786.
[3] JIANG Ji-hai, GE Ze-hua, YANG Chen, LIANG Hai-jian. Differentiator-based discrete variable structure controller for direct drive electro-hydraulic servo system [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1492-1499.
[4] WANG Tao, SAN Xiao-gang, GAO Shi-jie, WANG Hui-xian, WANG Jing, NI Ying-xue. Dynamic characteristics of vertical shaft system of photoelectric turntable [J]. 吉林大学学报(工学版), 2018, 48(4): 1099-1105.
[5] LIU Kun, LIU Yong, YAN Jian-chao, JI Shuo, SUN Zhen-yuan, XU Hong-wei. Dynamic analysis of sit-to-stand human motion based on in vitro-sensor detection [J]. 吉林大学学报(工学版), 2018, 48(4): 1140-1146.
[6] YOSHINO Tatsuo, FAN Lu-lu, YAN Lei, XU Tao, LIN Ye, GUO Gui-kai. Multiobjective optimization design for dummy chest structure based on MBNWS algorithm [J]. 吉林大学学报(工学版), 2018, 48(4): 1133-1139.
[7] LIU Guo-jun, MA Xiang, YANG Zhi-gang, WANG Cong-hui, WU Yue, WANG Teng-fei. Integrated pulsation micro mixing chip for three-phase flow [J]. 吉林大学学报(工学版), 2018, 48(4): 1063-1071.
[8] HE Ji-lin, CHEN Yi-long, WU Kang, ZHAO Yu-ming, WANG Zhi-jie, CHEN Zhi-wei. Energy flow analysis of crane hoisting system and experiment of potential energy recovery system [J]. 吉林大学学报(工学版), 2018, 48(4): 1106-1113.
[9] XIE Chuan-liu, TANG Fang-ping, SUN Dan-dan, ZHANG Wen-peng, XIA Ye, DUAN Xiao-hui. Model experimental analysis of pressure pulsation in vertical mixed-flow pump system [J]. 吉林大学学报(工学版), 2018, 48(4): 1114-1123.
[10] SUN Xiu-rong, DONG Shi-min, WANG Hong-bo, LI Wei-cheng, SUN Liang. Comparison of multistage simulation models of entire sucker rod with spatial buckling in tubing [J]. 吉林大学学报(工学版), 2018, 48(4): 1124-1132.
[11] LIU Zhi-feng, ZHAO Dai-hong, WANG Yu-mo, HUN Lian-ming, ZHAO Yong-sheng, DONG Xiang-min. Relationship between bearing capacity of heavy machine hydrostatic rotary table and temperature field distribution of oil pad [J]. 吉林大学学报(工学版), 2018, 48(3): 773-780.
[12] CAO Jing-hua, KONG Fan-sen, RAN Yan-zhong, SONG Rui-chen. Back pressure controller design of air compressor based on fuzzy self-adaptive PID control [J]. 吉林大学学报(工学版), 2018, 48(3): 781-786.
[13] LI Rui, ZHANG Lu-yang, LIU Lin, WU Yue-yuan, CHEN Shi-wei. Magneto-rheological vibration isolation for three-span bridge based on similarity theory [J]. 吉林大学学报(工学版), 2018, 48(3): 787-795.
[14] CHEN Zhong-min, HOU Li, DUAN Yang, ZHANG Qi, YANG Zhong-xue, JIANG Yi-qiang. Vibration analysis of a new pin-cycloid speed reducer [J]. 吉林大学学报(工学版), 2018, 48(1): 174-185.
[15] LIU Nian, XU Tao, XU Tian-shuang, HU Xian-lei, LIU Wei-hai. Lightweight design of TRB dashboard cross beam [J]. 吉林大学学报(工学版), 2018, 48(1): 199-204.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] Guo Kong-hui;Wang Shuang;Ding Hai-tao;Zhang Jian-wei . Elastic coupling characteristic of unsymmetrical rubber bushings of rear suspension[J]. 吉林大学学报(工学版), 2007, 37(06): 1225 -1228 .
[2] PENG Qi-yuan,XU Jin,ZHENG Sheng-bao,SHAO Yi-ming,DENG Tian-min. Effect of road pavement material change at tunnel entrance and exit on vehicle operation and optimization of transition location[J]. 吉林大学学报(工学版), 2009, 39(06): 1497 -1503 .
[3] WANG Xin,JIANG Ji-hai. Regenerative braking control strategy for wheel drive hydraulic hybrid vehicle[J]. 吉林大学学报(工学版), 2009, 39(06): 1544 -1549 .
[4] WU Jian,DONG Hui-juan,ZHANG Song-bai,ZHANG Guang-yu. Novel primary series matching scheme for piezoelectric ultrasonic transducer[J]. 吉林大学学报(工学版), 2009, 39(06): 1641 -1645 .
[5] ZHENG Wen-Zhong, WAN Fu-Xiong, LI Shi-Guang. Mechanical performance of reinforced concrete slabs strengthened with CFRP sheets bonded with an inorganic adhesive after fire[J]. 吉林大学学报(工学版), 2010, 40(05): 1244 -1249 .
[6] LIU Song-shan, WANG Qing-nian, WANG Wei-hua, LIN Xin. Influence of inertial mass on damping and amplitude-frequency characteristic of regenerative suspension[J]. 吉林大学学报(工学版), 2013, 43(03): 557 -563 .
[7] CHU Liang, WANG Yan-bo, QI Fu-wei, ZHANG Yong-sheng. Control method of inlet valves for brake pressure fine regulation[J]. 吉林大学学报(工学版), 2013, 43(03): 564 -570 .
[8] LI Jing, WANG Zi-han, YU Chun-xian, HAN Zuo-yue, SUN Bo-hua. Design of control system to follow vehicle state with HIL test beach[J]. 吉林大学学报(工学版), 2013, 43(03): 577 -583 .
[9] ZHU Jian-feng, LIN Yi, CHEN Xiao-kai, SHI Guo-biao. Structural topology optimization based design of automotive transmission housing structure[J]. 吉林大学学报(工学版), 2013, 43(03): 584 -589 .
[10] HU Xing-jun, LI Teng-fei, WANG Jing-yu, YANG Bo, GUO Peng, LIAO Lei. Numerical simulation of the influence of rear-end panels on the wake flow field of a heavy-duty truck[J]. 吉林大学学报(工学版), 2013, 43(03): 595 -601 .