吉林大学学报(工学版) ›› 2016, Vol. 46 ›› Issue (2): 479-486.doi: 10.13229/j.cnki.jdxbgxb201602022
• Orginal Article • Previous Articles Next Articles
GONG Jun1, 2, HE Qing-hua1, 2, ZHANG Da-qing2, LIU Chang-sheng1, 2, ZHAO Yu-ming1, 2, HU Peng1, 2
CLC Number:
[1] Hannan M A, Azidin F A, Mohamed A. Hybrid electric vehicles and their challenges: A review[J]. Renewable and Sustainable Energy Reviews, 2014, 29: 135-150. [2] Al-Alawi B M, Bradley T H. Review of hybrid, plug-in hybrid, and electric vehicle market modeling studies[J]. Renewable and Sustainable Energy Reviews, 2013, 21: 190-203. [3] Sharma P, Bhatti T S. A review on electrochemical double-layer capacitors[J]. Energy Conversion and Management, 2010, 51(12): 2901-2912. [4] Kwon T S, Lee S W, Sul S K, et al. Power control algorithm for hybrid excavator with supercapacitor[J]. Industry Applications, IEEE Transactions on, 2010, 46(4): 1447-1455. [5] Choi J, Kim H, Yu S, et al. Development of integrated controller for a compound hybrid excavator[J]. Journal of Mechanical Science and Technology, 2011, 25(6): 1557-1563. [6] Jin K, Park T, Lee H. A control method to suppress the swing vibration of a hybrid excavator using sliding mode approach[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2012, 226(5): 1237-1253. [7] Kagoshima M, Komiyama M, Nanjo T, et al. Development of new hybrid excavator[J]. Kobelco Technology Review, 2007 (27): 39-42. [8] Ochiai M, Ryu S. Hybrid in construction machinery[C]//Proceedings of the 7th JFPS, International Symposium on Fluid Power, Toyama,2008:41-44. [9] 王庆丰, 张彦廷, 肖清. 混合动力工程机械节能效果评价及液压系统节能的仿真研究[J]. 机械工程学报, 2005, 41(12): 135-140. Wang Qing-feng, Zhang Yan-ting, Xiao Qing. Evaluation for energy saving effect and simulation research on energy saving of hydraulic system in hybrid construction machinery[J]. Chinese Journal of Mechanical Engineering, 2005, 41(12): 135-140. [10] 张彦廷, 王庆丰, 肖清. 混合动力液压挖掘机液压马达能量回收的仿真及试验[J]. 机械工程学报, 2007, 43(8):218-223. Zhang Yan-ting, Wang Qing-feng, Xiao Qing. Simulation and experimental research on energy regeneration with hydraulic motor for hybrid drive excavator[J]. Chinese Journal of Mechanical Engineering, 2007, 43(8): 218-223. [11] 肖清, 王庆丰, 张彦廷, 等. 液压挖掘机混合动力系统建模及控制策略研究[J]. 浙江大学学报: 工学版, 2007, 41(3): 480-483. Xiao Qing, Wang Qing-feng , Zang Yan-ting ,et al. Study on modeling and control strategy of hybrid system in hydraulic excavator[J]. Journal of Zhejiang University(Engineering Science),2007, 41(3): 480-483. [12] Lin Tian-liang, Wang Qing-feng, Hu Bao-zan, et al. Research on the energy regeneration systems for hybrid hydraulic excavators[J]. Automation in Construction, 2010, 19(8): 1016-1026. [13] Wang Tao, Wang Qing-feng. Design and analysis of compound potential energy regeneration system for hybrid hydraulic excavator[J]. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 2012, 226(10): 1323-1334. [14] Lin Tian-liang, Wang Qing-feng. Hydraulic accumulator-motor-generator energy regeneration system for a hybrid hydraulic excavator[J]. Chinese Journal of Mechanical Engineering, 2012, 25(6): 1121-1129. [15] Wang Tao, Wang Qing-feng, Lin Tian-liang. Improvement of boom control performance for hybrid hydraulic excavator with potential energy recovery[J]. Automation in Construction, 2013, 30: 161-169. [16] Inoue H. Introduction of PC200-8 hybrid hydraulic excavators[J]. Komatsu Technical Report, 2008, 54(161): 1-6. [17] 夏虹. 博世力士乐携尖端绿色解决方案亮相Bauma China 2012[J].建筑机械化, 2013 (1): 23. Xia Hong. Bosch rexroth shows the advaned green solution in Bauma China 2012[J]. Construction Machinery, 2013 (1): 23. [18] JCMAS Standard H020[S]. Japan Construction Mechanization Association. Earth-moving machinery test methods for energy consumption hydraulic excavator. |
[1] | BI Qiu-shi,WANG Guo-qiang,HUANG Ting-ting,MAO Rui,LU Yan-peng. Tooth strength analysis of mineral sizer by coupling discrete element method and finite element method [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1770-1776. |
[2] | ZHU Wei,WANG Chuan-wei,GU Kai-rong,SHEN Hui-ping,XU Ke,WANG Yuan. Stiffness and dynamics analysis of a new type of tensegrity parallel mechanism [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1777-1786. |
[3] | LIU Jian-fang, WANG Ji-bo, LIU Guo-jun, LI Xin-bo, LIANG Shi-hai, YANG Zhi-gang. PMMA micromixer embedded with 3D channel based on piezoelectric actuation [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1500-1507. |
[4] | WANG Tao, SAN Xiao-gang, GAO Shi-jie, WANG Hui-xian, WANG Jing, NI Ying-xue. Dynamic characteristics of vertical shaft system of photoelectric turntable [J]. 吉林大学学报(工学版), 2018, 48(4): 1099-1105. |
[5] | HE Ji-lin, CHEN Yi-long, WU Kang, ZHAO Yu-ming, WANG Zhi-jie, CHEN Zhi-wei. Energy flow analysis of crane hoisting system and experiment of potential energy recovery system [J]. 吉林大学学报(工学版), 2018, 48(4): 1106-1113. |
[6] | XIE Chuan-liu, TANG Fang-ping, SUN Dan-dan, ZHANG Wen-peng, XIA Ye, DUAN Xiao-hui. Model experimental analysis of pressure pulsation in vertical mixed-flow pump system [J]. 吉林大学学报(工学版), 2018, 48(4): 1114-1123. |
[7] | SUN Xiu-rong, DONG Shi-min, WANG Hong-bo, LI Wei-cheng, SUN Liang. Comparison of multistage simulation models of entire sucker rod with spatial buckling in tubing [J]. 吉林大学学报(工学版), 2018, 48(4): 1124-1132. |
[8] | YOSHINO Tatsuo, FAN Lu-lu, YAN Lei, XU Tao, LIN Ye, GUO Gui-kai. Multiobjective optimization design for dummy chest structure based on MBNWS algorithm [J]. 吉林大学学报(工学版), 2018, 48(4): 1133-1139. |
[9] | LIU Kun, LIU Yong, YAN Jian-chao, JI Shuo, SUN Zhen-yuan, XU Hong-wei. Dynamic analysis of sit-to-stand human motion based on in vitro-sensor detection [J]. 吉林大学学报(工学版), 2018, 48(4): 1140-1146. |
[10] | LIU Zhi-feng, ZHAO Dai-hong, WANG Yu-mo, HUN Lian-ming, ZHAO Yong-sheng, DONG Xiang-min. Relationship between bearing capacity of heavy machine hydrostatic rotary table and temperature field distribution of oil pad [J]. 吉林大学学报(工学版), 2018, 48(3): 773-780. |
[11] | CAO Jing-hua, KONG Fan-sen, RAN Yan-zhong, SONG Rui-chen. Back pressure controller design of air compressor based on fuzzy self-adaptive PID control [J]. 吉林大学学报(工学版), 2018, 48(3): 781-786. |
[12] | LI Rui, ZHANG Lu-yang, LIU Lin, WU Yue-yuan, CHEN Shi-wei. Magneto-rheological vibration isolation for three-span bridge based on similarity theory [J]. 吉林大学学报(工学版), 2018, 48(3): 787-795. |
[13] | LI Yin-wu, WU Qing-wen, CHANG Zhi-yong, YANG Cheng. Simulation and optimal design of backhoe hydraulic excavator based on bionic teeth [J]. 吉林大学学报(工学版), 2018, 48(3): 821-827. |
[14] | LIU Han-guang, WANG Guo-qiang, MENG Dong-ge, ZHAO Huan-yu. Reasonable pre-tension research of crawler traveling gear of hydraulic excavator [J]. 吉林大学学报(工学版), 2018, 48(2): 486-491. |
[15] | CHEN Zhong-min, HOU Li, DUAN Yang, ZHANG Qi, YANG Zhong-xue, JIANG Yi-qiang. Vibration analysis of a new pin-cycloid speed reducer [J]. 吉林大学学报(工学版), 2018, 48(1): 174-185. |
|