吉林大学学报(工学版) ›› 2017, Vol. 47 ›› Issue (2): 373-383.doi: 10.13229/j.cnki.jdxbgxb201702005

Previous Articles     Next Articles

Simulation analysis on energy optimization strategy for Toyota PRIUD hybrid electric vehicle

XIA Chao-ying, DU Zhi-ming   

  1. School of Electrical Engineering and Automation,Tianjin University,Tianjin 300072,China
  • Received:2015-12-25 Online:2017-03-20 Published:2017-03-20

RICH HTML

0   

PDF (PC)

775

Abstract: A new energy optimization strategy for Toyota PRIUS hybrid electric vehicle is proposed based on the linear optimal control theory. In this strategy a quadratic performance index is built combined with several rules to restrict frequent and large-scale fluctuation on engine output power, thus, realizing direct reduction of fuel consumption while still maintaining the vehicle good driving performance. Based on the second development of ADVISOR software, the vehicle simulation model is established to verify the effectiveness of the proposed strategy. Simulation results show that the energy optimization strategy has better oil-saving effect than the rule-based energy management strategy over different driving cycles.

Key words: vehicle engineering, hybrid electric vehicle(HEV), energy management strategy, quadratic optimal control

CLC Number: 

  • U469
[1] 项昌乐,韩立金,刘辉,等. 混联混合动力车辆功率分流耦合机构特性分析[J]. 汽车工程,2010,32(3):183-187.
Xiang Chang-le, Han Li-jin, Liu Hui, et al. An analysis on the characteristics of power-split and coupling mechanism in series/parallel HEV[J]. Automotive Engineering, 2010,32(3):183-187.
[2] Liu J M, Peng H, Filipi Z. Modeling and analysis of the toyota hybrid system[C]∥Proc of the 2005 IEEE/ASME International Conf on Adv Intelligent Mechatronics, Monterey, CA, 2005:134-139.
[3] Kim J, Kang J, Choi W, et al. Control algorithm for a power split type hybrid electric vehicle[C]∥2010 International Symposium on Power Electronics, Electrical Drives, Automation and Motion, Piscataway, NJ, 2010:1575-1580.
[4] Chen Z, Mi C C. An adaptive online energy management controller for power-split HEV based on dynamic programming and fuzzy logic[C]∥Vehicle Power and Propulsion Conference, Dearborn, MI, 2009:335-339.
[5] Danil V P. Toyota PRIUS HEV neurocontrol[C]∥Proc of International Joint Conf on Neural Networks, Orlando, FL, 2007:2129-2134.
[6] 王庆年,王文,王鹏宇,等. 基于瞬时效率的功率分流式混合动力汽车最佳分离因子的确定[J]. 吉林大学学报:工学版, 2013, 43(5): 1160-1164.
Wang Qing-nian, Wang Wen, Wang Peng-yu, et al. Determination of the best separation factor for power-split hybrid electric vehicle based on instantaneous efficiency[J]. Journal of Jilin University (Engineering and Technology Edition), 2013, 43(5):1160-1164.
[7] Vinot E, Trigui R, Yuan C, et al. Improvement of an EVT-based HEV using dynamic programming[J]. IEEE Transactions on Vehicular Technology, 2014, 63(1):40-50.
[8] Paganelli G, Delprat S, Guerra T M, et al. Equivalent consumption minimization strategy for parallel hybrid powertrains[C]∥IEEE Vehicular Technology Conference, Birmingham, AL, 2002:2076-2081.
[9] Skugor B, Deur J, Cipek M, et al. Design of a power-split hybrid electric vehicle control system utilizing a rule-based controller and an equivalent consumption minimization strategy[J]. Proc of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2014, 228(6):631-648.
[10] Kim N, Cha S, Peng H. Optimal control of hybrid electric vehicles based on Pontryagin's Minimum Principle[J]. IEEE Transactions on Vehicular Technology, 2011, 19(5): 1279-1287.
[11] 夏超英,张聪. 混合动力系统能量管理策略的实时优化控制算法[J]. 自动化学报, 2015, 41(3): 508-517.
Xia Chao-ying, Zhang Cong. Real-time optimization control algorithm of energy management strategy for hybrid electric vehicles[J]. Acta Automatica Sinica, 2015, 41(3):508-517.
[12] 赵晓静,武一民,王海霞. 丰田PRIUS混合动力传动系统分析与建模[J]. 机械传动, 2010, 34(6):31-35.
Zhao Xiao-jing, Wu Yi-min, Wang Hai-xia. Analysis and modeling on Toyota hybrid powertrain system[J]. Journal of Mechanical Transmission, 2010, 34(6):31-35.
[1] CHANG Cheng,SONG Chuan-xue,ZHANG Ya-ge,SHAO Yu-long,ZHOU Fang. Minimizing inverter capacity of doubly-fed machine driving electric vehicles [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1629-1635.
[2] XI Li-he,ZHANG Xin,SUN Chuan-yang,WANG Ze-xing,JIANG Tao. Adaptive energy management strategy for extended range electric vehicle [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1636-1644.
[3] HE Ren,YANG Liu,HU Dong-hai. Design and analysis of refrigeration system supplied by solar auxiliary power of refrigerator car [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1645-1652.
[4] NA Jing-xin,MU Wen-long,FAN Yi-sa,TAN Wei,YANG Jia-zhou. Effect of hygrothermal aging on steel-aluminum adhesive joints for automotive applications [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1653-1660.
[5] LIU Yu-mei,LIU Li,CAO Xiao-ning,XIONG Ming-ye,ZHUANG Jiao-jiao. Construction on collision avoidance model of bogie dynamic simulation test bench [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1661-1668.
[6] ZHAO Wei-qiang, GAO Ke, WANG Wen-bin. Prevention of instability control of commercial vehicle based on electric-hydraulic coupling steering system [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1305-1312.
[7] SONG Da-feng, WU Xi-tao, ZENG Xiao-hua, YANG Nan-nan, LI Wen-yuan. Life cycle cost analysis of mild hybrid heavy truck based on theoretical fuel consumption model [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1313-1323.
[8] ZHU Jian-feng, ZHANG Jun-yuan, CHEN Xiao-kai, HONG Guang-hui, SONG Zheng-chao, CAO Jie. Design modification for automotive body structure based on seat pull safety performance [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1324-1330.
[9] NA Jing-xin, PU Lei-xin, FAN Yi-sa, SHEN Chuan-liang. Effect of temperature and humidity on the failure strength of Sikaflex-265 aluminum adhesive joints [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1331-1338.
[10] WANG Yan, GAO Qing, WANG Guo-hua, ZHANG Tian-shi, YUAN Meng. Simulation of mixed inner air-flow integrated thermal management with temperature uniformity of Li-ion battery [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1339-1348.
[11] JIN Li-sheng, XIE Xian-yi, GAO Lin-lin, GUO Bai-cang. Distributed electric vehicle stability control based on quadratic programming [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1349-1359.
[12] KUI Hai-lin, BAO Cui-zhu, LI Hong-xue, LI Ming-da. Idling time prediction method based on least square support vector machine [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1360-1365.
[13] WANG De-jun, WEI Wei-li, BAO Ya-xin. Actuator fault diagnosis of ESC system considering crosswind interference [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1548-1555.
[14] HU Man-jiang, LUO Yu-gong, CHEN Long, LI Ke-qiang. Vehicle mass estimation based on longitudinal frequency response characteristics [J]. 吉林大学学报(工学版), 2018, 48(4): 977-983.
[15] LIU Guo-zheng, SHI Wen-ku, Chen Zhi-yong. Finite element analysis of transmission error for hypoid gears considering installation error [J]. 吉林大学学报(工学版), 2018, 48(4): 984-989.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] TIAN Jing, LIU Zhong-Chang, HAN Yong-Qiang, JIN Hua-Yu, LI Jun, LI Kang, XU Zhen-Bo. Influence of fuel injection parameters on airfuel mixing and combustion of a common rail diesel engine[J]. 吉林大学学报(工学版), 2010, 40(02): 370 -0375 .
[2] TIAN Jing, HAN Yong-qang, LIU Zhong-chang, LI Jun, LI Kang. Performance and regeneration of diesel particulate filter with fuel borne catalyst on diesel engine[J]. 吉林大学学报(工学版), 2011, 41(01): 18 -0023 .
[3] YUAN Fang-en,LIN Xue-dong,TIAN Wei,GAO Ying,O Ryong Sik. Effect of matching between airflow and fuel sprayin reentrant combustion chamber on combustion process and exhaust emissions[J]. 吉林大学学报(工学版), 2011, 41(03): 629 -634 .
[4] HOU Zhong-jun, JIANG Hong-chun, WANG Ren-fang, HU Jun, MA You-qi, WANG Ke-yong, YAN Xi-qiang, QI Peng, MING Ping-wen. Performance stability of fuel cell engine applied in the fuel cell car demonstration[J]. 吉林大学学报(工学版), 2011, 41(增刊2): 131 -136 .
[5] ZUO Shu-guang, HAN Hui-jun, SU Hu, WEI Kai-jun, ZHAO Yuan-ling. Analysis of aerodynamic noise and influence factors of a regenerative blower used in air supply system of fuel cell cars[J]. 吉林大学学报(工学版), 2013, 43(06): 1453 -1458 .
[6] HUANG Ya, LIN Xue-dong, LI De-gang, GU Jing-jing, HOU Yu-jing. Simulation study of lean combustion characteristic of direct injection CNG engine[J]. 吉林大学学报(工学版), 2015, 45(3): 797 -805 .
[7] JIANG Tao, LIN Xue-dong, LI De-gang. Influence of ultra-high pressure injection on mixed gas formation,combustion and emission characteristics of DI diesel engine[J]. 吉林大学学报(工学版), 2016, 46(5): 1484 -1493 .
[8] HAN Xiao-mei, LIN Xue-dong, LI De-gang, LI Chuang. Injection quantity control strategy for starting to idling transition of light duty diesel engine[J]. 吉林大学学报(工学版), 2016, 46(4): 1103 -1108 .
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd