吉林大学学报(工学版) ›› 2010, Vol. 40 ›› Issue (06): 1572-1576.

• paper • Previous Articles     Next Articles

Structure and magnetic properties of FePt/Ag thin film

LI Hai-bo1,ZHANG Yu-mei1,LIU Mei1,YU Yong-sheng1,2,ZHANG Wei1,FEI Wei-dong2   

  1. 1.Institute of Condensed Matter Physics and Materials Science,Jilin Normal University,Siping 136000,China;2.School of Materials Science and Engineering,Harbin Institute of Technology,Harbin 150001,China
  • Received:2009-07-09 Online:2010-11-01 Published:2010-11-01

PDF (PC)

523

Abstract:

The FeAg and FePt/Ag thin films were deposited on SiO2〈0001〉substrates by direct current magnetron sputtering at room temperature.L10FePt granular films with high coercivity have been obtained after vacuum annealing at various temperature. The results indicated that adding Ag could reduce the FePt ordering temperature effectively,the transformation from disorder to order phase took place when the films were annealed at 300 ℃. With increasing the annealing temperature, the chemical ordering degree increased while the surface roughness of the samples decreased, forming uniform granular films.

Key words: metallic material, magnetic recording material, magnetron sputtering, L10FePt, structure, magnetic property

CLC Number: 

  • TG132.2
[1] GUAN Qing-feng,ZHANG Fu-tao,PENG Tao,LYU Peng,LI Yao-jun,XU Liang,DING Zuo-jun. Hot deformation behavior of 9%Cr steel contained B and Co elements [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1799-1805.
[2] JIANG Qiu-yue,YANG Hai-feng,TAN Cai-wang. Strengthening properties of welded joints of 22MnB5 super high strength steel [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1806-1810.
[3] SONG Jun, SHI Xue-fei, RUAN Xin. Optimization of thermal parameter identification for mass concrete [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1418-1425.
[4] DAI Yan, NIE Shao-feng, ZHOU Tian-hua. Finite element analysis of hysteretic behavior of square steel tube confined steel reinforced concrete column steel frame ring beam joint [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1426-1435.
[5] ZANG Peng-fei, WANG Zhe, SUN Chen-le, LIN Lian-lian. Scavenging process for stable operation of linear range-extende [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1455-1465.
[6] JIANG Ji-hai, GE Ze-hua, YANG Chen, LIANG Hai-jian. Differentiator-based discrete variable structure controller for direct drive electro-hydraulic servo system [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1492-1499.
[7] ZHENG Xiao-yi, SUN Da-qian, LI Xin, DU Gui-gang, XIN Wei-da, REN Zhen-an. Microstructure and properties of cladded Al-Nb layers reinforced by NbAl3 [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1531-1536.
[8] DONG Sa, LIU Da-you, OUYANG Ruo-chuan, ZHU Yun-gang, LI Li-na. Logistic regression classification in networked data with heterophily based on second-order Markov assumption [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1571-1577.
[9] LUAN Xin, DENG Wei, CHENG Lin, CHEN Xin-yuan. Mixed Logit model for understanding travel mode choice behavior of megalopolitan residents [J]. 吉林大学学报(工学版), 2018, 48(4): 1029-1036.
[10] GUAN Qing-feng, DONG Shu-heng, ZHENG Huan-huan, LI Chen, ZHANG Cong-lin, LV-Peng. Cr surface alloying of 45# steel by high-current pulsed electron beam treatment [J]. 吉林大学学报(工学版), 2018, 48(4): 1161-1168.
[11] HE Xiang-kun, JI Xue-wu, YANG Kai-ming, WU Jian, LIU Ya-hui. Tire slip control based on integrated-electro-hydraulic braking system [J]. 吉林大学学报(工学版), 2018, 48(2): 364-372.
[12] ZHANG Jun-yuan, JI Meng-xue, WANG Nan, YE Wei. Design of automotive body frontal structure for 25% overlap frontal collision [J]. 吉林大学学报(工学版), 2018, 48(1): 57-64.
[13] NI Ying-sheng, SUN Qi-xin, MA Ye, XU Dong. Calculation of capacity reinforcement about composite box girder with corrugated steel webs based on tensile stress region theory [J]. 吉林大学学报(工学版), 2018, 48(1): 148-158.
[14] ZHAO Yu-guang, YANG Xue-hui, XU Xiao-feng, ZHANG Yang-yang, NING Yu-heng. Effects of Al-10Sr modifiers with different states, modification temperature and holding time on microstructure of ZL114A alloy [J]. 吉林大学学报(工学版), 2018, 48(1): 212-220.
[15] HU Yun-feng, WANG Chang-yong, YU Shu-you, SUN Peng-yuan, CHEN Hong. Structure parameters optimization of common rail system for gasoline direct injection engine [J]. 吉林大学学报(工学版), 2018, 48(1): 236-244.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd