吉林大学学报(工学版) ›› 2015, Vol. 45 ›› Issue (3): 681-688.doi: 10.13229/j.cnki.jdxbgxb201503001

    Next Articles

Extended-range electric vehicle based on power distribution design

SONG Chuan-xue, WANG Da, SONG Shi-xin, PENG Si-lun, XIAO Feng   

  1. State Key Laboratory of Automotive Simulation and Control, Jilin University, Changchun 130022, China
  • Received:2014-03-25 Online:2015-05-01 Published:2015-05-01

PDF (PC)

556

Abstract: This paper presents a new powertrain configuration based on power distribution design of an extended-range electric vehicle. First, the parameters match and equipment selection were studied and a control strategy was proposed. Then, combined with the matching results and test data, the mathematical model of the vehicle was built with AMESim and Matlab-Simulink software platform. The model was analyzed aimed at the dynamic performance, EV-mode mileage, regenerative braking efficiency and extended-range model fuel consumption. Results show that the extended-range electric vehicle with the power distribution design has a smaller curb weight and higher regenerative braking efficiency without compromising the dynamic performance. This configuration could improve the EV-mode mileage for more than 30%, reduce the extended-range model fuel consumption for 3% ~ 6%, and has ideal energy-saving potential.

Key words: vehicle engineering, extended-range electric vehicle, powertrain, parameter matching, power distribution design

CLC Number: 

  • U467.7
[1] 殷承良, 张建龙. 新能源汽车整车设计:典型车型与结构[M]. 上海:上海科学技术出版社, 2013.
[2] Miller M A,Holmes A G,Conlon Brendan M, et al. The GM “Voltec” 4ET50 multi-mode electric transaxle[C]∥SAE Technical Paper,2011-01-0887.
[3] Yu Jun-wei, Zhang Yong, Liu Nan, et al. Modeling and control strategy simulation of extended-range electric vehicle[C]∥2011 International Conference on Transportation, Mechanical, and Electrical Engineering,Changchun,China, 2011:829-832.
[4] Tate E D, Harpster M O, Savagian P J. The electrification of the automobile: from conventional hybrid, to plug-in hybrids, to extended-range electric vehicles[C]∥SAE Technology Paper, 2008-01-0458.
[5] 林青. 地铁列车牵引计算的研究[J]. 铁路计算机应用,2012(2):49-51.
Lin Qing . Research on train traction calculation of Subway[J]. Railway Computer Application, 2012(2):49-51.
[6] 蔡卫兵. 四轮独立驱动电动汽车节能控制策略研究[D]. 长春:吉林大学汽车工程学院, 2013.
Cai Wei-bing . Research on the energy-saving control strategy of four-wheel-independent-drive electric vehicle[D]. Changchun: College of Automotive Engineering,Jilin University, 2013.
[7] 王鹏飞,张铁柱,霍炜,等. 增程式电动汽车动力参数匹配与仿真研究[J]. 青岛大学学报:工程技术版, 2013,28(2):1-5,15.
Wang Peng-fei,Zhang Tie-zhu, Huo Wei , et al. Parameter matching and simulation study of an extended-range electric vehicle[J]. Journal of Qingdao University(Engineering and Technology Edition), 2013,28(2):1-5,15.
[8] 宋珂,章桐. 增程式纯电驱动汽车动力系统研究[J]. 汽车技术, 2011(7):14-18.
Song Ke, Zhang Tong. Study of the powertrain systems of extended range electric vehicle[J]. Automotive Technology, 2011(7):14-18.
[9] Ribau J, Silva C,Brito F P, et al. Analysis of four-stroke, wankel, and micro-turbine based range extenders for electric vehicles[J]. Energy Conversion and Management, 2012,58:120-133.
[10] 呼和. 增程式纯电动车动力系统参数匹配与优化研究[D]. 长春:吉林大学汽车工程学院, 2012.
Hu He . A study of extended-range electric vehicle's powertrain parameter matching and optimization[D]. Changchun:College of Automotive Engineering,Jilin University, 2012.
[11] 李晓英,于秀敏,李君,等. 串联混合动力汽车控制策略[J]. 吉林大学学报:工学版,2005,35(2):122-126.
Li Xiao-ying ,Yu Xiu-min , Li Jun , et al. Control strategy for series hybrid-power vehicle[J]. Journal of Jilin University (Engineering and Technology Edition), 2005,35(2): 122-126.
[1] CHANG Cheng,SONG Chuan-xue,ZHANG Ya-ge,SHAO Yu-long,ZHOU Fang. Minimizing inverter capacity of doubly-fed machine driving electric vehicles [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1629-1635.
[2] XI Li-he,ZHANG Xin,SUN Chuan-yang,WANG Ze-xing,JIANG Tao. Adaptive energy management strategy for extended range electric vehicle [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1636-1644.
[3] HE Ren,YANG Liu,HU Dong-hai. Design and analysis of refrigeration system supplied by solar auxiliary power of refrigerator car [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1645-1652.
[4] NA Jing-xin,MU Wen-long,FAN Yi-sa,TAN Wei,YANG Jia-zhou. Effect of hygrothermal aging on steel-aluminum adhesive joints for automotive applications [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1653-1660.
[5] LIU Yu-mei,LIU Li,CAO Xiao-ning,XIONG Ming-ye,ZHUANG Jiao-jiao. Construction on collision avoidance model of bogie dynamic simulation test bench [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1661-1668.
[6] ZHAO Wei-qiang, GAO Ke, WANG Wen-bin. Prevention of instability control of commercial vehicle based on electric-hydraulic coupling steering system [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1305-1312.
[7] SONG Da-feng, WU Xi-tao, ZENG Xiao-hua, YANG Nan-nan, LI Wen-yuan. Life cycle cost analysis of mild hybrid heavy truck based on theoretical fuel consumption model [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1313-1323.
[8] ZHU Jian-feng, ZHANG Jun-yuan, CHEN Xiao-kai, HONG Guang-hui, SONG Zheng-chao, CAO Jie. Design modification for automotive body structure based on seat pull safety performance [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1324-1330.
[9] NA Jing-xin, PU Lei-xin, FAN Yi-sa, SHEN Chuan-liang. Effect of temperature and humidity on the failure strength of Sikaflex-265 aluminum adhesive joints [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1331-1338.
[10] WANG Yan, GAO Qing, WANG Guo-hua, ZHANG Tian-shi, YUAN Meng. Simulation of mixed inner air-flow integrated thermal management with temperature uniformity of Li-ion battery [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1339-1348.
[11] JIN Li-sheng, XIE Xian-yi, GAO Lin-lin, GUO Bai-cang. Distributed electric vehicle stability control based on quadratic programming [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1349-1359.
[12] KUI Hai-lin, BAO Cui-zhu, LI Hong-xue, LI Ming-da. Idling time prediction method based on least square support vector machine [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1360-1365.
[13] WANG De-jun, WEI Wei-li, BAO Ya-xin. Actuator fault diagnosis of ESC system considering crosswind interference [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1548-1555.
[14] HU Man-jiang, LUO Yu-gong, CHEN Long, LI Ke-qiang. Vehicle mass estimation based on longitudinal frequency response characteristics [J]. 吉林大学学报(工学版), 2018, 48(4): 977-983.
[15] LIU Guo-zheng, SHI Wen-ku, Chen Zhi-yong. Finite element analysis of transmission error for hypoid gears considering installation error [J]. 吉林大学学报(工学版), 2018, 48(4): 984-989.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd