吉林大学学报(工学版) ›› 2016, Vol. 46 ›› Issue (5): 1552-1557.doi: 10.13229/j.cnki.jdxbgxb201605025
Previous Articles Next Articles
CHENG Yan-yan1,2, LI Ming-zhe1, XING Jian1,3
CLC Number:
| [1] Shim D S, Yang D Y, Chung S W, et al. Optimization of forming steps in the incremental forming of twisted shapes using a line array roll set (LARS)[J]. International Journal of Precision Engineering and Manufacturing, 2010, 11(5):715-723. [2] 程艳艳,李明哲,邢健,等. 非规则曲面件的多夹钳式柔性拉伸成形研究[J]. 机械工程学报,2014,50(22):90-96. Cheng Yan-yan, Li Ming-zhe, Xing Jian, et al. Research of multi-gripper flexible stretch forming for irregular part[J]. Journal of Mechanical Engineering, 2014, 50(22):90-96. [3] Li R J, Li M Z, Qiu N J, et al. Surface flexible rolling for three-dimensional sheet metal parts[J]. Journal of Materials Processing Technology, 2014, 214(2):380-389. [4] Gong X P, Li M Z, Hu Z Q, et al. Research on continuous multi-point forming technology for three-dimensional sheet metal[J]. International Journal of Materials and Product Technology, 2010, 38(2):210-222. [5] 谭富星,李明哲,钱直睿,等. 钛合金颅骨修复体的多点成形数值模拟[J].吉林大学学报:工学版,2006,36(6):851-855. Tan Fu-xing, Li Ming-zhe, Qian Zhi-rui, et al. Numerical simulation on process of multi-point forming for titanium alloy cranial prosthesis[J]. Journal of Jilin University (Engineering and Technology Edition), 2006, 36(6): 851-855. [6] 龚学鹏,李明哲,卢启鹏,等.连续多点成形中的成形载荷分析[J].光学精密工程,2012,20(6):1288-1295. Gong Xue-peng, Li Ming-zhe, Lu Qi-peng, et al. Analysis on forming load in continuous multi-point forming[J]. Optics and Precision Engineering, 2012,20(6):1288-1295. [7] Cai Z Y, Wang S H, Xu X D, et al. Numerical simulation for the multi-point stretch forming process of sheet metal[J]. Journal of Materials Processing Technology, 2009, 209(1): 396-407. [8] Wang S H, Cai Z Y, Li M Z. Numerical investigation of the influence of punch element in multi-point stretch forming process[J]. The International Journal of Advanced Manufacturing Technology, 2010, 49(5): 475-483. [9] Wang Y, Li M Z. Research on three-dimensional surface parts in multi-gripper flexible stretch forming[J]. The International Journal of Advanced Manufacturing Technology, 2014, 71(9-12): 1701-1707. [10] 彭赫力,李明哲,付文智,等. 柔性离散夹钳拉形工艺的数值模拟[J]. 吉林大学学报:工学版,2012,42(3):660-664. Peng He-li, Li Ming-zhe, Fu Wen-zhi, et al. Numerical simulation of flexible discrete clamp stretch forming process[J]. Journal of Jilin University (Engineering and Technology Edition), 2012, 42(3):660-664. [11] 井関日出男,加藤和典,高場浩二. フレキシブルな型工具による逐次成形法(第2報くら形面成形における成形限界)[C]∥平成4年度塑性加工春季講演会,横浜, 日本:日本塑性加工协会,1992:527-530. [12] 西岡富仁雄,田中武,安川度,等. ユニバーサル多点プレス法による船体外板曲げ作業の自動化に関する研究(第2報実用化研究)[C]∥昭和48年日本造船学会春季講演会,日本:日本造船学会,1973:291-305. |
| [1] | GUO Hao-tian,XU Tao,LIANG Xiao,YU Zheng-lei,LIU Huan,MA Long. Optimization on thermal surface with rib turbulator inspired by turbulence of alopias' gill in simplified gas turbine transition piece [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1793-1798. |
| [2] | JIANG Qiu-yue,YANG Hai-feng,TAN Cai-wang. Strengthening properties of welded joints of 22MnB5 super high strength steel [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1806-1810. |
| [3] | GONG Ya-feng, WANG Bo, WEI Hai-bin, HE Zi-heng, HE Yu-long, SHEN Yang-fan. Surface subsidence law of double-line shield tunnel based on Peck formula [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1411-1417. |
| [4] | HU Zhi-qing, YAN Ting-xu, LI Hong-jie, LYU Zhen-hua, LIAO Wei, LIU Geng. Effect of cryogenic treatment on punch-shearing performance of aluminum alloy sheet [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1524-1530. |
| [5] | QIU Yan-kai, LI Bao-ren, YANG Gang, CAO Bo, LIU Zhen. Characteristics and mechanism reducing pressure ripple of hydraulic system with novel hydraulic muffler [J]. 吉林大学学报(工学版), 2018, 48(4): 1085-1091. |
| [6] | QIU Xiao-ming, WANG Yin-xue, YAO Han-wei, FANG Xue-qing, XING Fei. Multi-objective optimization of resistance spot welding parameters for DP1180/DP590 using grey relational analysis based Taguchi [J]. 吉林大学学报(工学版), 2018, 48(4): 1147-1152. |
| [7] | CHEN Jun-fu, GUAN Zhi-ping, YANG Chang-hai, NIU Xiao-ling, JIANG Zhen-tao, Song Yu-quan. Comparison of strain ranges and mechanical properties of metal rods under tension and torsion tests [J]. 吉林大学学报(工学版), 2018, 48(4): 1153-1160. |
| [8] | LIANG Xiao-bo, CAI Zhong-yi, GAO Peng-fei. Numerical simulation and experiment of cylindrical forming of sandwich composite panel [J]. 吉林大学学报(工学版), 2018, 48(3): 828-834. |
| [9] | LIU Zi-wu, LI Jian-feng. Erosion damage and evaluation of remanufacturing cladding layer for impeller metals FV520B [J]. 吉林大学学报(工学版), 2018, 48(3): 835-844. |
| [10] | LIU Chun-guo, LIU Wei-dong, DENG Yu-shan. Effect of multi-point punch active loading path on the stretch-forming of sheet [J]. 吉林大学学报(工学版), 2018, 48(1): 221-228. |
| [11] | FU Wen-zhi, LIU Xiao-dong, WANG Hong-bo, YAN De-jun, LIU Xiao-li, LI Ming-zhe, DONG Yu-qi, ZENG Zhen-hua, LIU Gui-bin. Multi-point forming process of 1561 aluminum alloy surfaces [J]. 吉林大学学报(工学版), 2017, 47(6): 1822-1828. |
| [12] | LYU Meng-meng, GU Zheng-wei, XU Hong, LI Xin. Process optimization of hot stamping for anti-collision beam with ultra high strength [J]. 吉林大学学报(工学版), 2017, 47(6): 1834-1841. |
| [13] | XING Hai-yan, GE Hua, LI Si-qi, YANG Wen-guang, SUN Xiao-jun. Hidden defect metal magnetic memory identification for welded joints based on fuzzy membership and maximum likelihood estimation [J]. 吉林大学学报(工学版), 2017, 47(6): 1854-1860. |
| [14] | WANG Hong-chao, SHAN Xi-zhuang, YANG Zhi-gang. Numerical simulation of the influence of ground effect simulation on vehicle cooling system experiment in climate wind tunnel [J]. 吉林大学学报(工学版), 2017, 47(5): 1373-1378. |
| [15] | GU Xiao-yan, LIU Ya-jun, SUN Da-qian, XU Feng, MENG Ling-shan, GAO Shuai. Microstructures and mechanical properties of transient liquid phase diffusion bonded S355 steel/6005A aluminum alloy joint [J]. 吉林大学学报(工学版), 2017, 47(5): 1534-1541. |
|