吉林大学学报(工学版) ›› 2016, Vol. 46 ›› Issue (5): 1732-1738.doi: 10.13229/j.cnki.jdxbgxb201605051

Previous Articles     Next Articles

Optimization of slanting surfaces of five-sided pyramidal full tensor magnetic gradient probe

SHEN Mao-dong1, CHENG De-fu1, AN Zhan-feng2, WANG Yi1, ZHAO Jing1   

  1. 1.College of Instrumentation and Electrical Engineering,Jilin University,Changchun 130061,China;
    China Aero Geophysical Survey and Remote Sensing Center for Land and Resources,Beijing 100083, China
  • Received:2015-04-21 Online:2016-09-20 Published:2016-09-20

RICH HTML

0   

PDF (PC)

130

Abstract: This paper presents a optimization method of slanting surfaces of a five-sided pyramidal probe based on quantified relations between the relative resolution of each magnetic gradient tensor's independent component and inclination of the probe. The optimal inclination was chosen on the basis of the range and maximum value of the five relative resolutions of the independent components. Finally, simulation results quantify the influence of surface tilt error on the measurement results, and identify the processing accuracy of the probe.

Key words: technology of instrument and meter, full tensor magnetic gradient probe, optimization of the sloping surface's inclination, relative resolution

CLC Number: 

  • TH762
[1] Schmidt P W, Clark D A. The magnetic gradient tensor: its properties and uses in source characterization[J]. The Leading Edge, 2006, 25(1):75-78.
[2] Keenan S T, Young J A, Foley C P, et al. A high-T c flip-chip SQUID gradiometer for mobile underwater magnetic sensing[J]. Superconductor Science and Technology,2010,23(2):025029.
[3] 张光,张英堂,尹刚,等.基于线性误差模型的磁张量系统校正[J].吉林大学学报:工学版,2015,45(3):1012-1016.
Zhang Guang, Zhang Ying-tang, Yin Gang,et al. Calibration method of magnetic tensor system based on linear error model[J].Journal of Jilin University ( Engineering and Technology Edition), 2015,45(3):1012-1016.
[4] Gamey T J, Doll W E, Beard L P, et al. Design and testing an airborne SQUID magnetometer for UXO detection[J]. SAGEEP, 2005,18(1): 718-735.
[5] Bick M, Leslie K E, Binks R A, et al. Axial high-temperature superconducting gradiometer with a flexible flux transformer[J]. Applied Physics Letters, 2004,84(26): 5347-5349.
[6] Eschner W, Ludwig W. Planar gradiometers arranged on non-parallel surfaces for determination of a gradient tensor of a magnetic field[P]. US:5469056,1995
[7] 申茂冬,安战锋,程德福,等.航空超导全张量磁梯度测量系统相关参数获取装置及方法[P].中国:201410634524.6,2014-11-07.
[8] 伍俊,荣亮亮,邱隆清,等.一种基于GPS同步的航空超导全张量磁梯度测控装置[P].中国:201410742613.2,2014-12-08.
[9] 低温超导磁梯度张量系统JESSY STAR[EB/OL].[2013-04-02]. http://www.supracon.com/en/star.html.
[10] 张昌达.航空磁力梯度张量测量——航空磁测技术的最新进展[J].工程地球物理学报,2006,3(5):354-361.
Zhang Chang-da. Airborne tensor magnetic grandiometry—the latest progress of airborne magnetometric technology[J]. Chinese Journal of Engineering Geophysics,2006,3(5): 354-361.
[11] Cantor R, Hall J A, Matlachov A N, et al. First-order planar superconducting quantum interference device gradiometers with long baseline[J]. IEEE Transactions on Applied Superconductivity, 2007,17(2):672-675.
[1] QIU Yan-kai, LI Bao-ren, YANG Gang, CAO Bo, LIU Zhen. Characteristics and mechanism reducing pressure ripple of hydraulic system with novel hydraulic muffler [J]. 吉林大学学报(工学版), 2018, 48(4): 1085-1091.
[2] WU Jiang, XU Zhuang, LIU Li-jia, JI Yan-ju, LI Su-yi. Peripheral oxygen saturation detecting prototype applied in sleep apnea syndrome [J]. 吉林大学学报(工学版), 2018, 48(2): 640-644.
[3] YANG Cheng, SONG Ping, PENG Wen-jia, JIN Hao-long, PAN Zhi-qiang. Design of armored vehicle integrated test system based on hybrid bus [J]. 吉林大学学报(工学版), 2018, 48(1): 186-198.
[4] YANG Cheng, SONG Ping, PENG Wen-jia, DENG Gao-shou, LIU Xiong-jun. Design of host computer platform for armored vehicle integrated test system [J]. 吉林大学学报(工学版), 2017, 47(6): 1796-1803.
[5] WANG Tian-hao, WANG Zhong-fu, WANG Yu-meng, YANG Kai-yu, GAO Yin-han, MA Xi-lai. Statistic analysis of cable bundle crosstalk based on polynomial chaos expansion [J]. 吉林大学学报(工学版), 2017, 47(5): 1568-1576.
[6] LIU Xiao-wei, LI Hai, WENG Rui, ZHANG Hai-feng, ZHAO Jun. Application of electrostatic torque to improve dynamic characteristics of novel rotational gyroscope [J]. 吉林大学学报(工学版), 2017, 47(3): 850-854.
[7] LIN Jun, ZHAO Yue, JIANG Chuan-dong, WANG Ying-ji. New surface MRS method based on optimized Block inversion [J]. 吉林大学学报(工学版), 2017, 47(2): 530-539.
[8] ZHANG Fei, SHAN Zhong-de, REN Yong-xin, NIE Jun-gang, LIU Feng. Calibration of line array camera for head defect detection system on cylinder cover [J]. 吉林大学学报(工学版), 2017, 47(2): 540-545.
[9] YIN Yao-bao, YUAN Jia-yang, FU Jun-yong. Characteristics of two-stage relief valve with series damping orifice in the front chamber of pilot valve [J]. 吉林大学学报(工学版), 2017, 47(1): 129-136.
[10] LIN Jun, YANG Yu, HU Xue-yan, WANG Shi-long. Transmitting waveform control technology for transient electromagnetic method based on inductive load [J]. 吉林大学学报(工学版), 2016, 46(5): 1718-1724.
[11] YU Sheng-bao, SU Fa, ZHENG Jian-bo, ZHU Zhan-shan. Design of transient electromagnetic receiving system based on LabVIEW [J]. 吉林大学学报(工学版), 2016, 46(5): 1725-1731.
[12] LIN Jun, ZHAO Yue, JIANG Chuan-dong, LI Tong, LIU Xiao-nan. Three-dimensional forward modeling with high precision for underground MRS based on Hammer integration [J]. 吉林大学学报(工学版), 2016, 46(2): 609-615.
[13] ZHAO Hong-wei, DONG Xiao-long, ZHANG Lin, HU Xiao-li. Determination of the elastic moduli of bulk materials by four-point bending automatic test [J]. 吉林大学学报(工学版), 2016, 46(1): 140-145.
[14] YU Sheng-bao, SU Fa, HE Jian-long, ZHENG Jian-bo. Design and realization of synchronization system of multifunctional electromagnetic instrument [J]. 吉林大学学报(工学版), 2016, 46(1): 146-152.
[15] WANG Jian-peng, QIN Si-cheng, YANG Li-guang, LI Wu. Simulation analysis of heat transfer in the hydraulic system of loader [J]. 吉林大学学报(工学版), 2016, 46(1): 153-158.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] LIU Song-shan, WANG Qing-nian, WANG Wei-hua, LIN Xin. Influence of inertial mass on damping and amplitude-frequency characteristic of regenerative suspension[J]. 吉林大学学报(工学版), 2013, 43(03): 557 -563 .
[2] CHU Liang, WANG Yan-bo, QI Fu-wei, ZHANG Yong-sheng. Control method of inlet valves for brake pressure fine regulation[J]. 吉林大学学报(工学版), 2013, 43(03): 564 -570 .
[3] LI Jing, WANG Zi-han, YU Chun-xian, HAN Zuo-yue, SUN Bo-hua. Design of control system to follow vehicle state with HIL test beach[J]. 吉林大学学报(工学版), 2013, 43(03): 577 -583 .
[4] ZHU Jian-feng, LIN Yi, CHEN Xiao-kai, SHI Guo-biao. Structural topology optimization based design of automotive transmission housing structure[J]. 吉林大学学报(工学版), 2013, 43(03): 584 -589 .
[5] HU Xing-jun, LI Teng-fei, WANG Jing-yu, YANG Bo, GUO Peng, LIAO Lei. Numerical simulation of the influence of rear-end panels on the wake flow field of a heavy-duty truck[J]. 吉林大学学报(工学版), 2013, 43(03): 595 -601 .
[6] WANG Tong-jian, CHEN Jin-shi, ZHAO Feng, ZHAO Qing-bo, LIU Xin-hui, YUAN Hua-shan. Mechanical-hydraulic co-simulation and experiment of full hydraulic steering systems[J]. 吉林大学学报(工学版), 2013, 43(03): 607 -612 .
[7] ZHANG Chun-qin, JIANG Gui-yan, WU Zheng-yan. Factors influencing motor vehicle travel departure time choice behavior[J]. 吉林大学学报(工学版), 2013, 43(03): 626 -632 .
[8] MA Wan-jing, XIE Han-zhou. Integrated control of main-signal and pre-signal on approach of intersection with double stop line[J]. 吉林大学学报(工学版), 2013, 43(03): 633 -639 .
[9] YU De-xin, TONG Qian, YANG Zhao-sheng, GAO Peng. Forecast model of emergency traffic evacuation time under major disaster[J]. 吉林大学学报(工学版), 2013, 43(03): 654 -658 .
[10] XIAO Yun, LEI Jun-qing, ZHANG Kun, LI Zhong-san. Fatigue stiffness degradation of prestressed concrete beam under multilevel amplitude cycle loading[J]. 吉林大学学报(工学版), 2013, 43(03): 665 -670 .
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd