吉林大学学报(工学版) ›› 2016, Vol. 46 ›› Issue (3): 725-731.doi: 10.13229/j.cnki.jdxbgxb201603007

• Orginal Article • Previous Articles     Next Articles

Noise diagnosis of in idle automotive air conditioning compressor and topology optimization

SHI Wen-ku1, ZU Qing-hua1, CHEN Zhi-yong1, MAO Yang1, HE Bang-ying1, FU Ji-yun1, LI Xiao-yan2   

  1. 1.State Key Laboratory of Automotive Simulation and Control, Jilin University, Changchun 130022, China;
    2.Department of Product Engineering, Mudanjiang Futong Automotive Air Conditioning Co., Ltd.,Mudanjiang 157000, China
  • Received:2015-01-09 Online:2016-06-20 Published:2016-06-20

RICH HTML

0   

PDF (PC)

151

Abstract: Test diagnosis, analysis and improvement of a SUV and its air conditioning system are carried out to solve the inner noise problem, which is generated while the air conditioning is turned in idle. The test frequency spectrum analysis of inner noise and compressor vibration, modal analysis and test validation show that the working frequency of the compressor is close to the system's first order frequency. This causes resonance, which leads to obvious noise difference between turning on and turning off the air conditioning in idle. To solve this problem, the shape of the compressor support is improved by topology optimization. Modal analysis indicates that the first order modal frequency of the improved support keeps away from the working frequency of the compressor. The improved support is test and the results indicate that the inner noise is reduced by 2.3 dB(A), and the noise decreases obviously when the engine speed is from 900 r/min to 3000 r/min in run up condition.

Key words: vehicle engineering, automotive air conditioning compressor, noise diagnosis, topology optimization

CLC Number: 

  • U463.8
[1] 林逸,马天飞,姚为民,等. 汽车NVH特性研究综述[J]. 汽车工程,2002,24(3):177-186.
Lin Yi,Ma Tian-fei,Yao Wei-min, et al. The sunnary of study on vehicle NVH performance[J]. Automotive Engineering,2002,24(3):177-186.
[2] 李沛然,邓兆祥,叶常景.汽车NVH试验数据管理系统关键技术研究[J].振动与冲击,2010,29(2):163-166.
Li Pei-ran, Deng Zhao-xiang, Ye Chang-jing. Key techniques of a test data management system for automotive NVH[J]. Journal of Vibration and Shock,2010,29(2):163-166.
[3] Humbad N. Automotive HVAC noise measurements and analysis[J]. Chinese Journal of Automotive Engineering,2011,1(4):299-309.
[4] 潘军,王屹,蒋祖华,等. 斜盘式汽车空调压缩机动力特性仿真[J]. 流体机械,2002,30(1):44-48.
Pan Jun,Wang Yi,Jiang Zu-hua,et al.Dynamic simulation of swach plate compressor in automotive air conditioning system[J].Fluid Machinery,2002,30(1):44-48.
[5] Lietz C. Automotive HVAC hiss noise measurements[J]. Chinese Journal of Automotive Engineering,2011,1(4): 263-271.
[6] 孙启甲. 实车空调系统异响诊断技术研究[D]. 重庆:重庆大学机械工程学院,2012.
Sun Qi-jia. Study on abnormal sound diagnosis of car's conditioning system[D]. Chongqing:College of Mechanical Engineering, Chongqing University,2012.
[7] 卢喜,杨诚. 旋叶式汽车空调压缩机的噪声源识别[J]. 重庆大学学报:自然科学版,2006,29(8):70-73.
Lu Xi, Yang Cheng. Identifying research on noise sources of rotary vane compressor[J]. Journal of Chongqing University(Nature Science Edition),2006,29(8):70-73.
[8] 房师毅,李连生,束鹏程,等. 无油润滑涡旋式空调压缩机的工作过程研究[J]. 中国机械工程,2005,16(2):123-127.
Fang Shi-yi,Li Lian-sheng, Shu Peng-cheng,et al. Study on working process of an oil-free scroll air compressor[J]. China Mechanical Engineering,2005,16(2):123-127.
[9] 张立军,靳晓雄,黄锁成,等.汽车空调压缩机引起的车内噪声试验研究[J].汽车工程,2002,24(5):398-402.
Zhang Li-jun,Jin Xiao-xiong,Huang Suo-cheng,et al. Experimental reaserch on the car interior noise caused by air conditioning compressor[J]. Automotive Engineering, 2002,24(5):398-402.
[10] 黄锁成,靳晓雄,张立军,等. 汽车空调用压缩机的振动和噪声分析[J]. 汽车技术,2003(5):20-23.
Huang Suo-cheng,Jin Xiao-xiong,Zhang Li-jun, et al. Analysis of vibration and noises of automotive air-conditioner compressor[J]. Automobile Technology, 2003(5):20-23.
[11] 朱爱武. 空调压缩机对车内噪声的影响[J]. 噪声与振动控制,2010(4):47-49.
Zhu Ai-wu. Influence of air conditioner's compressor on vehicle interior noise[J]. Noise and Vibration Control, 2010(4):47-49.
[12] 江辉有. 拓扑学[M]. 北京:机械工业出版社,2013.
[13] 朱剑峰,林逸,陈潇凯,等. 汽车变速箱壳体结构拓扑优化设计[J]. 吉林大学学报:工学版,2013,43(3):584-589.
Zhu Jian-feng, Lin Yi, Chen Xiao-kai, et al. Structural topology optimization based design of automotive transmission housing structure[J]. Journal of Jilin University (Engineering and Technology Edition),2013,43(3):584-589.
[14] 赵红伟,陈潇凯,林逸. 电动汽车动力电池仓拓扑优化[J].吉林大学学报:工学版,2009,39(4):846-850.
Zhao Hong-wei,Chen Xiao-kai,Lin Yi. Topology optimization of power battery cabin in electric vehicle[J].Journal of Jilin University(Engineering and Technology Edition),2009,39(4):846-850.
[15] 上官文斌,蒋翠翠,潘孝勇.汽车悬架控制臂的拓扑优化与性能计算[J].汽车工程,2008,30(8):709-712.
Shangguan Wen-bin,Jiang Cui-cui,Pan Xiao-yong. Topology optimization and performance calculation for control arm of vehicle suspension[J]. Automotive Engineering,2008,30(8):709-712.
[1] CHANG Cheng,SONG Chuan-xue,ZHANG Ya-ge,SHAO Yu-long,ZHOU Fang. Minimizing inverter capacity of doubly-fed machine driving electric vehicles [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1629-1635.
[2] XI Li-he,ZHANG Xin,SUN Chuan-yang,WANG Ze-xing,JIANG Tao. Adaptive energy management strategy for extended range electric vehicle [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1636-1644.
[3] HE Ren,YANG Liu,HU Dong-hai. Design and analysis of refrigeration system supplied by solar auxiliary power of refrigerator car [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1645-1652.
[4] NA Jing-xin,MU Wen-long,FAN Yi-sa,TAN Wei,YANG Jia-zhou. Effect of hygrothermal aging on steel-aluminum adhesive joints for automotive applications [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1653-1660.
[5] LIU Yu-mei,LIU Li,CAO Xiao-ning,XIONG Ming-ye,ZHUANG Jiao-jiao. Construction on collision avoidance model of bogie dynamic simulation test bench [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1661-1668.
[6] ZHAO Wei-qiang, GAO Ke, WANG Wen-bin. Prevention of instability control of commercial vehicle based on electric-hydraulic coupling steering system [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1305-1312.
[7] SONG Da-feng, WU Xi-tao, ZENG Xiao-hua, YANG Nan-nan, LI Wen-yuan. Life cycle cost analysis of mild hybrid heavy truck based on theoretical fuel consumption model [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1313-1323.
[8] ZHU Jian-feng, ZHANG Jun-yuan, CHEN Xiao-kai, HONG Guang-hui, SONG Zheng-chao, CAO Jie. Design modification for automotive body structure based on seat pull safety performance [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1324-1330.
[9] NA Jing-xin, PU Lei-xin, FAN Yi-sa, SHEN Chuan-liang. Effect of temperature and humidity on the failure strength of Sikaflex-265 aluminum adhesive joints [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1331-1338.
[10] WANG Yan, GAO Qing, WANG Guo-hua, ZHANG Tian-shi, YUAN Meng. Simulation of mixed inner air-flow integrated thermal management with temperature uniformity of Li-ion battery [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1339-1348.
[11] JIN Li-sheng, XIE Xian-yi, GAO Lin-lin, GUO Bai-cang. Distributed electric vehicle stability control based on quadratic programming [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1349-1359.
[12] KUI Hai-lin, BAO Cui-zhu, LI Hong-xue, LI Ming-da. Idling time prediction method based on least square support vector machine [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1360-1365.
[13] WANG De-jun, WEI Wei-li, BAO Ya-xin. Actuator fault diagnosis of ESC system considering crosswind interference [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1548-1555.
[14] HU Man-jiang, LUO Yu-gong, CHEN Long, LI Ke-qiang. Vehicle mass estimation based on longitudinal frequency response characteristics [J]. 吉林大学学报(工学版), 2018, 48(4): 977-983.
[15] LIU Guo-zheng, SHI Wen-ku, Chen Zhi-yong. Finite element analysis of transmission error for hypoid gears considering installation error [J]. 吉林大学学报(工学版), 2018, 48(4): 984-989.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd