吉林大学学报(工学版) ›› 2017, Vol. 47 ›› Issue (1): 185-190.doi: 10.13229/j.cnki.jdxbgxb201701028

• Orginal Article • Previous Articles     Next Articles

Springback prediction for multi-point 3D stretch bending profile

LIANG Ji-cai1, LI Yi2, GAO Song3, TENG Fei4   

  1. 1.Roll Forging Institute, Jilin University, Changchun 130022,China;
    2.College of Materials Science and Engineering, Jilin University, Changchun 130022, China;
    3.School of Mechatronic Engineering, Changchun University of Technology, Changchun 130012,China;
    4.School of Mechanical and Vehicle Engineering, Changchun University, Changchun 130022,China
  • Received:2015-12-22 Online:2017-01-20 Published:2017-01-20

Abstract: Based on Abaqus/Standard software, the finite element model and hybrid algorithm for multi-point 3D stretch bending profile of aluminum alloy were established. The dynamic explicit algorithm was used in stretch bending, and the static implicit algorithm was used for spingback prediction. The stress, strain and springback of the part were simulated by implicit method of Abaqus/Standard software. The forming experiment results valid the finite element model and the hybrid algorithm. The springback deviation between theoretically predicted value and the measured value decreases as the bending deformation increases in the vertical direction.

Key words: materials synthesis and processing technology, profile multi point stretch bending, finite element model, springback prediction

CLC Number: 

  • TG356
[1] Baringbing H A, Welo T. Parameters controlling dimensional accuracy of aluminum extrusions formed in stretch bending[C]∥The 10th Esaform Conference on Material Forming, Zaragoza, Spain, 2007:127-132.
[2] Kleiner M, Chatti S, Klaus A. Metal forming techniques for lightweight construction[J]. Journal of Materials Processing Technology, 2006, 177(1-3):2-7.
[3] Li Ming-zhe,Cai Zhong-yi,Sui Zhen, et al.Principle and applications of multi-point matched-die forming for sheet metal[J].Proceedings of the Institution of Mechanical Engineers,Part B:Journal of Engineering
Manufacture, 2008, 222(5):581-589.
[4] Wang Shao-hui, Cai Zhong-yi, Li Ming-zhe, et al. Numerical simulation on the local stress and local deformation in multi-point stretch forming process[J]. International Journal of Advanced Manufacturing Technology, 2012, 60(9-12): 901-911.
[5] Zhang Qing-fang, Cai Zhong-yi, Zhang Yan, et al. Springback compensation method for doubly curved plate in multi-point forming[J]. Materials & Design, 2013, 47: 377-385.
[6] Cai Zhong-yi, Li Ming-zhe, Lan Ying-wu. Three-dimensional sheet metal continuous forming process based on flexible roll bending: principle and experiments[J]. Journal of Materials Processing Technology, 2012,212(1): 120-127.
[7] Liang Ji-cai, Gao Song, Teng Fei. Flexible 3D stretch-bending technology for aluminum profile[J]. International Journal of Advanced Manufacturing Technology, 2014, 71(9):1939-1947.
[8] Liang Ji-cai, Teng Fei, Gao Song, et al. Multi-objective optimization of flexible three-dimensional stretch-bending forming process of rectangular hollow aluminum profiles[J]. Journal of South China University of Technology(Natural Science Edition),2013, 41(9): 143-148.
[9] 梁继才,滕菲,高嵩,等. 柔性三维拉弯成形模具型面修正关键技术的研究[J]. 机械工程学报,2013,49(17):163-170.
Liang Ji-cai,Teng Fei,Gao Song,et al. Key technologies research on the iterative die-face adjustment in the forming process of flexible three-dimensional stretch-bending[J]. Journal of Mechanical Engineering, 2013, 49(17):163-170.
[1] JIANG Qiu-yue,YANG Hai-feng,TAN Cai-wang. Strengthening properties of welded joints of 22MnB5 super high strength steel [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1806-1810.
[2] HU Zhi-qing, YAN Ting-xu, LI Hong-jie, LYU Zhen-hua, LIAO Wei, LIU Geng. Effect of cryogenic treatment on punch-shearing performance of aluminum alloy sheet [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1524-1530.
[3] QIU Xiao-ming, WANG Yin-xue, YAO Han-wei, FANG Xue-qing, XING Fei. Multi-objective optimization of resistance spot welding parameters for DP1180/DP590 using grey relational analysis based Taguchi [J]. 吉林大学学报(工学版), 2018, 48(4): 1147-1152.
[4] CHEN Jun-fu, GUAN Zhi-ping, YANG Chang-hai, NIU Xiao-ling, JIANG Zhen-tao, Song Yu-quan. Comparison of strain ranges and mechanical properties of metal rods under tension and torsion tests [J]. 吉林大学学报(工学版), 2018, 48(4): 1153-1160.
[5] LIANG Xiao-bo, CAI Zhong-yi, GAO Peng-fei. Numerical simulation and experiment of cylindrical forming of sandwich composite panel [J]. 吉林大学学报(工学版), 2018, 48(3): 828-834.
[6] LIU Zi-wu, LI Jian-feng. Erosion damage and evaluation of remanufacturing cladding layer for impeller metals FV520B [J]. 吉林大学学报(工学版), 2018, 48(3): 835-844.
[7] LIU Chun-guo, LIU Wei-dong, DENG Yu-shan. Effect of multi-point punch active loading path on the stretch-forming of sheet [J]. 吉林大学学报(工学版), 2018, 48(1): 221-228.
[8] LYU Meng-meng, GU Zheng-wei, XU Hong, LI Xin. Process optimization of hot stamping for anti-collision beam with ultra high strength [J]. 吉林大学学报(工学版), 2017, 47(6): 1834-1841.
[9] XING Hai-yan, GE Hua, LI Si-qi, YANG Wen-guang, SUN Xiao-jun. Hidden defect metal magnetic memory identification for welded joints based on fuzzy membership and maximum likelihood estimation [J]. 吉林大学学报(工学版), 2017, 47(6): 1854-1860.
[10] GU Xiao-yan, LIU Ya-jun, SUN Da-qian, XU Feng, MENG Ling-shan, GAO Shuai. Microstructures and mechanical properties of transient liquid phase diffusion bonded S355 steel/6005A aluminum alloy joint [J]. 吉林大学学报(工学版), 2017, 47(5): 1534-1541.
[11] GU Zheng-wei, ZHANG Wen-xue, LYU Meng-meng, WANG Wei, XU Hong, LI Xin. Stretch bending defect control of U-section stainless steel profile with wide flange [J]. 吉林大学学报(工学版), 2017, 47(4): 1165-1170.
[12] CAI Yang, FU Wei, TAO Ze-feng, CHEN Kang-wei. Influence analysis of geotextile on reducing traffic induced reflective cracking using extended finite element model [J]. 吉林大学学报(工学版), 2017, 47(3): 765-770.
[13] GU Zheng-wei, LYU Meng-meng, ZHANG Wen-xue, LEI Jiao-jiao, XU Hong. Stamping of front-end three-dimensional skin of China electric multiple units [J]. 吉林大学学报(工学版), 2017, 47(3): 869-875.
[14] YANG Xin-hui, XUE Wei, GUO Nan. Bending performance of glued-lumber beam reinforced with steel plate [J]. 吉林大学学报(工学版), 2017, 47(2): 468-477.
[15] XU Hong, LIU Ya-nan, YU Ting, GU Zheng-wei, LI Xiang-ji, ZHANG Zhi-qiang. Inelastic recovery behavior and microscopic mechanism of high strength DP780 steel during cyclic loading-unloading [J]. 吉林大学学报(工学版), 2017, 47(1): 191-198.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!