吉林大学学报(工学版) ›› 2017, Vol. 47 ›› Issue (5): 1446-1452.doi: 10.13229/j.cnki.jdxbgxb201705016

Previous Articles     Next Articles

Response of railway track and subgrade under the effect overweight goods

YIN Zi-hong, ZHU Bo, SHAO Guo-xia, KONG De-hui, JIANG Liang-wei   

  1. School of Civil Engineering, Southwest Jiaotong University, Chengdu 610031, China
  • Received:2016-04-25 Online:2017-09-20 Published:2017-09-20

Abstract: To solve the problem of mechanical response behavior of track and subgrade, and the structure design of subgrade bed under overweight goods, an integrated model of track and subgrade was established. Based on soil elastic-plastic theory, the response laws of the track and subgrade under overweight good were analyzed. The mechanism of the spatio-temporal evolution of the mechanical properties were revealed, and the overall thickness of the track and subgrade was recommended under overweight goods. Results show that, the dynamic bending stress value imposed on the rail does not exceed the allowable value. The maximum pressure of the sleeper is 222.2 kN, which is close to the designed bearing capacity, 230 kN, of the cross-section of type Ⅲ sleeper. The bearing capacity of the ballast track structure does not satisfy the transportation requirement of overweight goods. Therefore, the subgrade bed must be adequately tamped and compacted before and after the trains pass the railway. The maximum dynamic stress at the top of the subgrage bed is 197.37 kPa, which is more than the critical dynamic stress, 169 kPa, of group A filler. The overall thickness of the track and subgrade should be 4.3 for overweight goods. The results of this work can provide theoretical basis and technical reference for the safe transportation of overweight goods and the maintenance of the track and subgrade.

Key words: railway transportation, overweight goods, integration model, stress distribution, subgrade bed design

CLC Number: 

  • U213.1
[1] 陈亮.超重货物运输安全相关理论及对策研究[D].北京:北京交通大学交通运输学院,2010.
Chen Liang. Study of transportation safety related theories and countermeasures for overweight freight[D]. Beijing: School of Transportation, Beijing Jiaotong University, 2010.
[2] 铁道部.铁路超重超限货物运输规则[M].北京:中国铁道出版社,2007.
[3] 尹晔飞.超限超重货物运输方案研究[D].长沙:中南大学交通运输工程学院,2009.
Yin Ye-fei. Research on project of the special train of out-of-gauge and overweight goods transportation[D].Changsha: School of Traffic and Transportation, Central South University, 2009.
[4] 刘立存.铁路超限超重货物运输组织研究[D].长沙:中南大学交通运输工程学院,2006.
Liu Li-cun. Research on organization of out-of-gauge and overweight goods transportation[D]. Changsha: School of Traffic and Transportation, Central South University, 2006.
[5] 赵菲.超限超重货物办理站资质管理相关问题的研究[D]. 北京:北京交通大学交通运输学院,2010.
Zhao Fei. Study on qualification and management of handing station for out-of-gauge and overweight goods[D]. Beijing: School of Transportation, Beijing Jiaotong University, 2010.
[6] 张长军.超重货物装载偏心条件下桥梁活荷载计算方法研究[D].成都:西南交通大学交通运输与物流学院,2015.
Zhang Chang-jun. Research on calculation method of live load on bridge under condition of eccentric overweight goods loading[D].Chengdu: School of Transportation and Logistics, Southwest Jiaotong University, 2015.
[7] 胡玉明,黄英,古海东.排桩支护结构内力与变形三维有限元数值分析[J].吉林大学学报:工学版,2016,46(2):445-450.
Hu Yu-ming, Huang Ying, Gu Hai-dong. Three-dimensional finite element analysis of internal forces and displacement of scattered row piles[J]. Journal of Jilin University(Engineering and Technology Edition),2016,46(2):445-450.
[8] 岳蓓蓓.高速货运重载铁路有砟轨道及路基动应力分析[D].天津:河北工业大学土木与交通学院,2014.
Yue Bei-bei. Analysis of dynamic stress of high-speed freight heavy haul railway ballast track and subgrade[D].Tianjin: School of Civil Engineering and Transportation, Hebei University of Technology, 2014.
[9] 吕文强.大轴重重载铁路路基基床结构设计方法及技术标准研究[D]. 成都:西南交通大学土木工程学院,2015.
Lyu Wen-qiang. Study of subgrade structure design theory and key technology on heavy haul railway of large axle load[D]. Chengdu: School of Civil Engineering, Southwest Jiaotong University, 2015.
[10] 郭抗美,王岩,叶庆志,等.重载铁路路基基床结构设计研究[J].铁道工程学报,2014,31(11):1-5.
Guo Kang-mei, Wang Yan, Ye Qing-zhi, et al. Design research on the subgrade structure of heavy haul railway[J].Journal of Railway Engineering,2014,31(11) :1-5.
[11] 相颖慧.遂渝铁路无砟轨道路涵过渡段性能实车测试及路基结构FEM分析[D].成都:西南交通大学土木工程学院,2008.
Xiang Ying-hui. Field test on subgrade-culvert transition performance of ballastless track and subgrade FEM analysis on Suiyu railway[D].Chengdu: School of Civil Engineering, Southwest Jiaotong University, 2008.
[12] 刘晶磊,宋楚国,叶庆志,等.重载铁路路基基床结构强度控制设计方法研究[J].铁道工程学报,2015,32(2):33-38.
Liu Jing-lei, Song Chu-guo, Ye Qing-zhi,et al. Study on strength control design method of heavy-haul railway subgrade bedding structure[J].Journal of Railway Engineering,2015,32(2):33-38.
[13] 葛如生.阳安线基床病害整治[D]. 成都:西南交通大学土木工程学院,2003.
Ge Ru-sheng. The renovation of railway roadbed disease on Yang'an[D].Chengdu: School of Civil Engineering, Southwest Jiaotong University, 2003.
[14] 黄维栋.尼日利亚铁路路基主要设计原则的确定[J].山西建筑,2008,34(9):294-295.
Huang Wei-dong. Determination of major principles for railway bed design in Nigeria[J]. Shanxi Architecture,2008,34(9):294-295.
[1] DAI Yan, NIE Shao-feng, ZHOU Tian-hua. Finite element analysis of hysteretic behavior of square steel tube confined steel reinforced concrete column steel frame ring beam joint [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1426-1435.
[2] ZUO Jing, SHUAI Bin, HUANG Wen-cheng. Railway emergency rescue program searching based on improved distance entropy MULTIMOORA [J]. 吉林大学学报(工学版), 2017, 47(4): 1068-1074.
[3] NIU Zhi-hui, SU Jian, ZHANG Yi-rui, XU Guan, TAN Fu-xing. Track irregularity simulation based on bogie test rig [J]. 吉林大学学报(工学版), 2017, 47(2): 400-407.
[4] WANG Qi-ming, SU Jian, ZHANG Lan, CHEN Qiu-yu, XU Guan. Forward kinematics of orthogonal Stewart platform based on L-M algorithm [J]. 吉林大学学报(工学版), 2017, 47(1): 97-104.
[5] LIU Yu-mei, ZHAO Cong-cong, XIONG Ming-ye, GUO Wen-cui, ZHANG Zhi-yuan. Reliability assessment of high-speed railway drivetrain based on matter-element model [J]. 吉林大学学报(工学版), 2015, 45(4): 1063-1068.
[6] SHI Huai-long, SONG Ye, WU Ping-bo, ZENG Jing, ZHU Hai-yan. Calculation and testing of suspension stiffness of a bogie of high speed EMU [J]. 吉林大学学报(工学版), 2015, 45(3): 776-782.
[7] LAN Feng-chong, LI Zhong-chao, ZHOU Yun-jiao, CHEN Ji-qing. Stress distribution and strength prediction of aluminum-magnesium alloy adhesive-bonded single-lap joints [J]. 吉林大学学报(工学版), 2015, 45(3): 726-732.
[8] ZHANG Lin, ZHAO Hong-wei, YANG Yi-han, MA Zhi-chao, HUANG Hu, MA Zhi-chao. Molecular dynamics simulation of nanoindentation of single-layer graphene sheet [J]. 吉林大学学报(工学版), 2013, 43(06): 1558-1565.
[9] WANG Xiu-gang, SU Jian, CAO Xiao-ning, XU Zhen, LU Hai-ge, TIAN Zong-ju. Forward kinematics solution of bogie 6-DOF platform based on the orthogonality of rotation matrix [J]. 吉林大学学报(工学版), 2013, 43(05): 1241-1246.
[10] LI Cheng, ZHU Hong-hong, TIE Ying, HE Long. Stress distribution and load sharing in single-lap bonded/bolted joints [J]. 吉林大学学报(工学版), 2013, 43(04): 933-938.
[11] Li Cheng, Liu Zhi-hua, Zhang Ping . Analysis on stress and displacement of a composite flywheel composed of twolayer rotor with pre-displacement [J]. 吉林大学学报(工学版), 2007, 37(04): 828-832.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] LIU Song-shan, WANG Qing-nian, WANG Wei-hua, LIN Xin. Influence of inertial mass on damping and amplitude-frequency characteristic of regenerative suspension[J]. 吉林大学学报(工学版), 2013, 43(03): 557 -563 .
[2] CHU Liang, WANG Yan-bo, QI Fu-wei, ZHANG Yong-sheng. Control method of inlet valves for brake pressure fine regulation[J]. 吉林大学学报(工学版), 2013, 43(03): 564 -570 .
[3] LI Jing, WANG Zi-han, YU Chun-xian, HAN Zuo-yue, SUN Bo-hua. Design of control system to follow vehicle state with HIL test beach[J]. 吉林大学学报(工学版), 2013, 43(03): 577 -583 .
[4] HU Xing-jun, LI Teng-fei, WANG Jing-yu, YANG Bo, GUO Peng, LIAO Lei. Numerical simulation of the influence of rear-end panels on the wake flow field of a heavy-duty truck[J]. 吉林大学学报(工学版), 2013, 43(03): 595 -601 .
[5] WANG Tong-jian, CHEN Jin-shi, ZHAO Feng, ZHAO Qing-bo, LIU Xin-hui, YUAN Hua-shan. Mechanical-hydraulic co-simulation and experiment of full hydraulic steering systems[J]. 吉林大学学报(工学版), 2013, 43(03): 607 -612 .
[6] ZHANG Chun-qin, JIANG Gui-yan, WU Zheng-yan. Factors influencing motor vehicle travel departure time choice behavior[J]. 吉林大学学报(工学版), 2013, 43(03): 626 -632 .
[7] MA Wan-jing, XIE Han-zhou. Integrated control of main-signal and pre-signal on approach of intersection with double stop line[J]. 吉林大学学报(工学版), 2013, 43(03): 633 -639 .
[8] YU De-xin, TONG Qian, YANG Zhao-sheng, GAO Peng. Forecast model of emergency traffic evacuation time under major disaster[J]. 吉林大学学报(工学版), 2013, 43(03): 654 -658 .
[9] XIAO Yun, LEI Jun-qing, ZHANG Kun, LI Zhong-san. Fatigue stiffness degradation of prestressed concrete beam under multilevel amplitude cycle loading[J]. 吉林大学学报(工学版), 2013, 43(03): 665 -670 .
[10] XIAO Rui, DENG Zong-cai, LAN Ming-zhang, SHEN Chen-liang. Experiment research on proportions of reactive powder concrete without silica fume[J]. 吉林大学学报(工学版), 2013, 43(03): 671 -676 .